• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.382-390
• /
• 2017

This study was conducted to identify the factors affecting the quality of life of cancer patients based on demographic characteristics, health status, and mental health using the results of the 6th National Health and Nutrition Survey. The research tool used the demographic characteristics, health status, mental health, and quality of life of the KNHANES VI-2. Data analysis was conducted using SAS 9.3 version. There were significant differences in the quality of life in the study results by age, gender, economic activity, individual income quartile, subjective health status, mental health status, activity limitation, stress perception, and experience of depression symptoms. Factors influencing the quality of life of cancer patients included age, sex, income quintiles(individual), subjective health status, activity limitation, and experience of depression symptoms, which together explained 39.1% of the quality of life. To improve the quality of life of cancer patients, comprehensive management is required from diagnosis to treatment to return to society. It is also necessary to develop and apply long-term programs including multidimensional approaches and improvement of quality of life, early screening of cancer and cancer prevention education, management of depression symptoms, and social support.

• Tunnel and Underground Space
• /
• v.14 no.5
• /
• pp.327-338
• /
• 2004

The purpose of this research is to establish a concept of the factor of safety of tunnels which is a quantitative estimate of the stability of tunnels. Based on this concept, a numerical technique which calculates the factor of safety of tunnels was developed. To obtain the safety factor of a tunnel, the strength reduction technique in which a series of analyses are repeated with reduced ground strength until the tunnel collapses were employed. With this technique, the failure plane, as well as the factor of safety, can be obtained without prescribing the trial failure plane. Analyses were conducted with FLA $C^{2D}$(ver3.3), a geotechnical analysis program which is based on the finite difference method. From the result, the location of plastic zones, the maximum convergence and the maximum stress generated in the support system were also analyzed. The result shows that factors of safety are higher for the 1st and 2nd rock classes, and lower for the lower rock classes. Furthermore, factor of safety is higher when $K_{0}$ =0.5 compared to at in case of $K_{0}$ =2.0. Through this research, it is found that the factor of safety defined in this research can be used as a good quantitative index representing the stability of tunnels. Also, close examination of the results can help adjustment of the quantity and location of additional supports.s.

• Journal of radiological science and technology
• /
• v.32 no.1
• /
• pp.69-78
• /
• 2009

The cardiovascular disease has been known as a common cause of death for a long time in the west. The eating habits of Asia, including Korea, have changed recently, so that this disease is also a problem in Asia now. Annual Report on the Cause of Death Statistics from 1996 to 2006 reported that the cardiovascular disease would become the number one cause of death in the next $5{\sim}10$ years. Therefore we realize that more accurate examination is required. The aim of this study was to investigate the accuracy of Calcium-scoring CT and the relationship between risk factor and quantitative scores of Calcium-scoring CT. Through this study we expect that the national public health will be improved. Seventy patients with chest pain were chosen at random. The patients were undergone both coronary CT antigraphy and Calcium - scoring CT at G hospital in Incheon from February 1 to June 30, 2008. The result of the Calcium-scoring CT showed its usefulness for Ischemic cardiovascular disease, with an accuracy similar to that of exercise/pharmacologic stress or ECG when it is difficult for a patient to exercise due to joint problems, aging or for other reasons.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.4
• /
• pp.407-419
• /
• 2014

The analysis of shape before and after heating, Surface moisture content, Moisture weight change and surface heat distribution by fixed type microwave heating in forms of flat veneer and veneer roll of Korean pine, pitch pine, larch and yellow poplar was conducted. The results were as follows: In case of flat veneer, the quality after microwave heating was comparatively good, but it was somewhat warped. These phenomena may be due to transformation by nonuniform drying stress and stronger effect of local irradiation on the veneers when heating veneer owing to the characteristics of fixed type microwave equipment. In case of the features of roll-shaped veneer heated by microwave, the quality after heating was comprehensively excellent. Especially there was no warping unlike flat veneer. Heat distribution and diffusion were also very stable for roll-shaped veneer and such heat distribution had much influence on surface moisture content and moisture weight loss. Accordingly, the veneer roll would show sufficient drying efficiency in fixed type microwave equipment through a scrutinized examination on generating power and irradiation time according to species and thickness of veneer.

• The korean journal of orthodontics
• /
• v.40 no.1
• /
• pp.40-49
• /
• 2010

Objective: The aim of this research was to evaluate the mechanical properties (MP) and degree of the phase transformation (PT) of martensitic (M-NiTi), austenitic (A-NiTi) and thermodynamic nickel-titanium wire (T-NiTi). Methods: The samples consisted of $0.016\;{\times}\;0.022$ inch M-NiTi (Nitinol Classic, NC), A-NiTi (Optimalloy, OPTI) and T-NiTi (Neo-Sentalloy, NEO). Differential scanning calorimetry (DSC), three-point bending test, X-ray diffraction (XRD), and microstructure examination were used. Statistical evaluation was undertaken using ANOVA test. Results: In DSC analysis, OPTI and NEO showed two peaks in the heating curves and one peak in the cooling curves. However, NC revealed one single broad and weak peak in the heating and cooling curves. Austenite finishing ($A_f$) temperatures were $19.7^{\circ}C$ for OPTI, $24.6^{\circ}C$ for NEO and $52.4^{\circ}C$ for NC. In the three-point bending test, residual deflection was observed for NC, OPTI and NEO. The load ranges of NC and OPTI were broader and higher than NEO. XRD and microstructure analyses showed that OPTI and NEO had a mixture of martensite and austenite at temperatures below Martensite finishing ($M_f$). NEO and OPTI showed improved MP and PT behavior than NC. Conclusions: The mechanical and thermal behaviors of NiTi wire cannot be completely explained by the expected degree of PT because of complicated martensite variants and independent PT induced by heat and stress.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.3
• /
• pp.227-236
• /
• 2016

Periodontal disease, one of the most common oral diseases, has been widely researched. However, in the face of increasing incidence of adolescent periodontitis, there has been only little concern about the periodontal conditions in adolescents. The purpose of this study was to evaluate the periodontal health and assess the prevalence of the periodontal disease and its causing factors among adolescents. The data was collected from subjects ranging from age 10, 13 and 16 years old in Jeonju by clinical examination and survey. The prevalence of periodontal disease and plaque index value were higher in male than female (p < 0.05). The group of 13 years old subjects had the highest prevalence of periodontal disease (73.3%) and plaque index value (p < 0.05). Among the plaque index of each individual tooth, mandibular central incisor showed the highest value. The survey relating anticipated risk factors demonstrated that the group of 13 years old subjects had the least care for oral hygiene. Also, patients who received the treatment of scaling exhibited high plaque index (p < 0.05), and adolescents with great stress loads showed calculus deposition and increased plaque index (p < 0.05).

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.11 no.1
• /
• pp.87-97
• /
• 2000

One week survey to investigate the prevalence rate and clinical characteristics of laryngopharyngeal reflux symptoms in Korea. The subject(n=7,704 patients) was newly enrolled patients at the out patient clinic in 90 ENT departments of resident training hospitals and 11 local clinics, which were voluntarily participated in the study 1) Twenty five percent of all enrolled patients has LPR-related symptoms or clinical findings from the examination by ENT specialists. 2) Among e name of LPR-related diagnosis, globus syndrome was e most common, and follows by reflux laryngitis, and chronic laryngitis. 3) Women was more prevalent than men, and it is common in 5th, 6th, and 7th decades, which seems to be related with aging process. 4) Most popular symtoms of LPR. were globus sensation, conic throat clearing, and hoarseness of unknown origin. 5) Aggravating factors of LPR-related symptoms were tiredness, mental stress, drink alcohol, cigarettes smoking, spicy food, and drinking coffee. 6) LPR-related symptoms were more common in professional voice users. 7) In past medical history, diseases of stomach and tonsillitis were most common.

• Asian Journal of Turfgrass Science
• /
• v.23 no.1
• /
• pp.163-176
• /
• 2009

Investigating endophyte distribution, naturally occurring in native grasses, is important for understanding endophyte-grass associations and using the beneficial effects of endophytes in cultivated plants. The goal of this study was to investigate endophytes from natural Festuca spp. in Yunnan, Guizhou, and Sichuan Provinces of China, and to study the compatibility between the endophytes and turf type tall fescue (Festuca arundinacea) which is widely used for lawn and athletic fields in that region. Of 628 accessions in F. ovina, 421 had endophytes identified in leaf sheath from on-site microscopic examination. From Festuca spp, three isolates were obtained from the seeds and ninety isolates were obtained from seedlings established from the collected seeds. The isolates from F. ovina and F. stapfii were tentatively identified as Neotyphodium typhinum and Neotyphodiumstarii, respectively. We tested compatibility of the two fungal species with seven tall fescue cultivars, Little Hero, Sub Boy, Eldorado, Arid III, Millennium, Crossfire, and Fawn. N. typhinum or N. starii did not infect 'Fawn' with either seed injection or seed soaking method. The highest infection rate byboth N. typhinum and N. starii was in 'Sun Boy' and 'Eldorado'. There were significant interaction effects between tall fescue cultivar and type of endophyte on infection.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.4
• /
• pp.435-450
• /
• 2020

The divergence section of a double-deck tunnel can be divided into a 'widening pre-divergence section', a large cross-section with a cap shape and a 'post-divergence section' where the separation between the main and the branch tunnel is made. Since the cross-section of the widening pre-divergence section is considerably larger than that of the post-divergence section, the influence of excavation due to the different sizes and shapes in the cross-section should be considered in the examination of the tunnel stability. In this study, the effect of the preceding excavation, that is the excavation of the widening pre-divergence section, on excavation stability of the post-divergence section was examined by varying the excavation methods and bench lengths through 3D finite element analysis. The results showed that although the effects of the excavation methods and the bench lengths are not significant on the variation of principal stresses, the preceding excavation causes a relatively large variation on the stresses which may have an impact on the stability of the post-divergence section from the comparison of Stress-Strength Ratio (SSR) between the cases with and without the consideration of the preceding excavation effect by 2D finite element analysis.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.1
• /
• pp.99-107
• /
• 2001

Manufacture of fishing vessel is needed the effective material for light, strength, fire and corrosion of water in order to improve durability by high-speed and fishing. These fishing vessel can be divided into FRP and AI alloys fishing vessel. FRP fishing vessel is light and effective for strength but highly ignited and susceptible to heat during the manufacturing ship by-produce noxious component for human. In the case of a scrapped ship, it cause environmental pollution. On the other hand, aluminum is a material in return for FRP and has merit of high-strength and lightness. It's more heat proof and durable than FRP and superior to prevent from corrosion. Al alloys fishing vessel development is rising as an urgent matter. But, al alloy has some defect of bad weldability, welding transformation, cracks and overcost of construction. Therefore this study is to develop the new welding joint shape solving aluminum defects and mechanical behavior. First of all, strength was compared and reviewed by analysis of plate, stiffen plate, new model simplified by using plate theory. On the base of this result, plate and new model of temperature distribution, weld residual stress and strength of tensile, compressive force were compared and reviewed by finite element computer program has been developed to deal with heat conduction and thermal elasto plastic problem. Also, new model is proved application possibility and excellent mechanic by strength comparison is established to tensile testing result.