• 한국구조물진단유지관리공학회 논문집
• /
• 제12권4호
• /
• pp.71-78
• /
• 2008

철도교량의 경우, 열차하중에 의한 영향으로 교량 단부에서 상향력이 발생하였으며, 이 상향력은 체결장치에 압축력과 인장력을 유발시켰다. 현재까지 이에 대한 안전성을 검토하기 위해 체결장치를 1방향의 스프링 요소로 모사하여 구조해석을 수행해 왔다. 이러한 경우에 스프링 요소의 강성은 압축력을 재하한 실험적 연구에 의하여 산정되었다. 따라서, 상향력은 체결장치에 압축력뿐만 아니라 인장력도 유발시키기 때문에 합리적이고 정확한 구조해석을 수행하기 위해서는 인장력을 재하한 실험적 연구로부터 산정된 병진방향 강성 그리고 회전방향 강성을 함께 고려해야 한다. 본 연구에서는 6가지 실험체에 대하여 탄성과 비탄성 실험을 수행하여 레일 연직방향 병진강성과 레일 강축에 대한 회전강성을 검토하였고, 체결장치의 구조적인 거동을 분석하였다.

• Journal of the Korean Data and Information Science Society
• /
• 제23권1호
• /
• pp.89-98
• /
• 2012

이 논문에서는 두 개의 Maxwell분포의 모수들의 동질성을 모수비에 근거하여 검정하는 근사통계량을 제안한다. Maxwell분포의 모수비에 대한 추정량이 복잡하여 정확한 분포를 유도하기는 매우 어렵다. 이러한 문제를 해결하기 위한 하나의 대안으로 표준정규분포로 근사적으로 수렴하는 통계량을 고려해야 한다. 이 논문에서 제안된 통계량은 표준정규분포로 수렴하며, 표본의 수가 작은 경우에도 사용할 수 있다. 특히, 본 논문에서는 부호화 로그 우도비 통계량과 수정된 부호화 로그 우도비 통계량을 개발한다. 일반적으로, 수정된 부호화 로그 우도비 통계량은 로그 우도비 통계량에 비해 표준정규분포로 수렴하는 속도가 매우 빠르다. 부호화 로그 우도비 통계량은 작은 표본으로도 표준정규분포로 매우 빨리 수렴한다. 제안된 통계량들의 성질들을 모의실험을 통하여 알아보고, 제안된 통계량을 예제를 통하여 연구한다.

• Bulletin of the Korean Chemical Society
• /
• 제30권7호
• /
• pp.1489-1496
• /
• 2009

This study was done for the determination and excretion profile of adrenosterone and its metabolites in human urine using both liquid chromatography with atmospheric pressure chemical ionization mass spectrometry and gas chromatography with mass spectrometry. Adrenosterone and its two metabolites were detected in human urine after administration a healthy volunteer with 75 mg of adrenosterone. We found that adrenosterone-M1 ($C_{19}H_{26}O_3$) was a reduction and adrenosterone-M2 ($C_{19}H_{26}O_4$) was a hydroxylation at C-ring, which did not know the exact position of the C-ring. The adrenosterone parent was detected by GC/TOF-MS, but not detected by LC/APCI/MS because of low intensity. Adrenosterone and its two metabolites were excreted as their glucuronided fractions. The recovery of this method ranged from 100.7 to 118.4% and the reproducibility and accuracy test were 85.5 to 112.0% and 1.1 to 8.4%, respectively. The excretion studies showed that adrenosterone and its metabolites were detectable in human urine during a 48 h period after oral administration, with maximum level of excretion at 4.1 h. The glucuro-/sulfaconjugated ratio of adrenosterone, M1 and M2 was 0.73 ${\pm}$ 0.03, 0.96 ${\pm}$ 0.06 and 0.89 ${\pm}$ 0.03 (n = 6), respectively. The amounts of adrenosterone excreted in urine were 14.75 ng for 48 h. Also, the maximum level of androsterone and 11$\beta$-hydroxy androsterone, which were endogenous steroids, were reached 4.1 h after the oral administration of adrenosterone.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.585-589
• /
• 2010

액체로켓 엔진이 발사체의 추력원으로써 임무를 성공적으로 완수하기 위해서는 주어진 성능 요구조건을 충실히 만족시킬 수 있어야 한다. 가스발생기 사이클 엔진의 경우 엔진을 구성하는 각 구성품들의 성능 분산을 보정하는 지상 시험을 거치게 되며, 이때 보정용 제어밸브를 이용하여 추력이나 혼합비 등의 엔진 성능을 요구수준 이내로 보정하게 된다. 이러한 보정용 제어밸브의 고유유량특성(Inherent Flow Characteristics)을 제어 대상값과 선형적인 관계를 가지도록 선정함으로써 보정 과정을 간단하면서도 예측가능한 형태로 가져갈 수 있다. 이에 본 연구에서는 기존에 개발된 엔진 모드해석 프로그램을 응용하여 추력 및 혼합비 보정용 제어밸브의 고유유량특성을 계산하기 위한 알고리즘을 제안하고, 실제 엔진의 작동 모드를 계산하였다.

• 해양환경안전학회지
• /
• 제20권4호
• /
• pp.405-411
• /
• 2014

사고선박의 2차적인 피해를 줄이기 위해서는 사고선박을 안전한 곳으로 이동시키기 위한 예인선의 소요마력 산출이 요구되며, 길이 93 m 여객선형 대상선박에 대한 실선실험을 통하여 소요마력 산출에 대한 이론적인 계산식의 유효성을 검증하였다. 실선실험 결과는 이론계산 결과와 비교해 볼 때 상당히 일치되어 예선의 소요마력 산정을 위해 사용하기에 충분하다고 판단되며, 정적저항에서 공기저항, 마찰저항, 잉여저항과 더불어 프로펠러 고착저항이 상대적으로 큰 값으로 평가되었다. 피예인선은 예인과정에서 좌우 측면으로 $30^{\circ}$정도까지 스윙운동 및 요우잉이 발생하였으며, 이로 인한 동적저항이 큰 값으로 평가되었다. 추후 안전율에 대한 연구가 필요할 것으로 판단되며, 저항의 정확한 예측을 통하여 안전율을 최소화함으로써 경제적인 예인선의 사용이 가능할 것으로 판단된다.

• Structural Engineering and Mechanics
• /
• 제31권2호
• /
• pp.137-152
• /
• 2009

Mechanic behavior of Y-shape thin-walled box girder bridge structure is complex, so one can not exactly hold the mechanical behavior of the Y-shape thin-walled box girder bridge structure through general calculation theory and analytical method. To hold the mechanical behavior better, based on elementary beam theory, by increasing the degree of freedom analytical method, taking account of restrained torsiondistortion angledistortion warp and shearing lag effect at the same time, authors obtain a thin-walled box beam analytical element of 10 degrees of freedom of every node, derive stiffness matrix of the element, and code a finite element procedure. In addition, authors combine the obtained procedure with spatial grillage analytical method, meanwhile, they build a new analytical method that is the spatial thin-walled box girder element grillage analysis method. In order to validate the precision of the obtained analysis method, authors analyze a type Y-shape thin-walled box girder bridge structure according to the elementary beam theory analytical method, the shell theory analytical method and the spatial thin-walled box girder element grillage analysis method respectively. At last, authors test a type Y-shape thin-walled box girder bridge structure. Comparisons of the results of theory analysis with the experimental text show that the spatial thin-walled box girder element grillage analysis method is simple and exact. The research results are helpful for the knowledge of the mechanics property of these Y-shape thin-walled box girder bridge structures.

• 대한기계학회논문집B
• /
• 제24권7호
• /
• pp.938-944
• /
• 2000

Recently, micro fin tube is widely used to heat exchanger for high performance. And, as the alternative refrigerants for R-22, hydrocarbons such as R-290, R-600 and R-600a are very promising because of their low GWP and ODP. Thus, R-290 was used as working fluid in this study. Most design of heat exchanger had been based on heat transfer characteristics of pure refrigerant although refrigerant oil exists in the refrigeration cycles. So, the influence of oil on heat transfer characteristics have to be considered for investigating exact evaporation heat transfer characteristics. But, this is an unresolved problem of refrigeration heat transfer. Therefore the influence of the refrigeration oil to the evaporation heat transfer characteristics of R-290 were conducted in a horizontal micro tin tube. The mineral oil was used as refrigeration oil. The experimental apparatus consisted of a basic refrigeration cycle and a system for oil concentration measurement. Test conditions are as the follows; evaporation temperature $5^{\circ}C$, mass velocity 100 $kg/m^2s$, heat flux 10 $kW/m^2$, oil concentration 0, 1.3, 3.3, 5.7 wt.%, and quality $0.07{\sim}1.0$. When refrigeration oil was entered, oil foaming was observed at the low quality region. And, very small bubbles were observed as quality was increased. Pressure drop and heat transfer coefficient increased as the concentration of refrigeration oil increased to 5 wt.%.. The performance index of heat exchanger was the highest near 3.3 wt.%.

• 대한간호학회지
• /
• 제16권2호
• /
• pp.13-28
• /
• 1986

The main purpose of th study was to evaluate he validity of Korean Pain Measurement Tool composed of pain terms. The specific purposes of this study were 1. to examine whether pain intensities of pain terms are congruent with those classified in three previous studies. 2. to evaluate the relative intensity of each term by panel of judges. 3. to explore the difference of ranks of pain terms according to the sex, education, and ages. One hundred and sixty normal individuals were selected by 2$\times$2$\times$4 sampling design. Sex (male, female), education (high school, college), and age (20s, 30s, 40s, 50s) were matched. Each individual was asked to rate the ranks of 3~8 pain terms in each subclass. The data measured by ordinal scale were transformed to the interval scale to compare with the pain intensities gained from the previous study. The pain ranks different from previous results were finally rearranged or cancelled through the consultation of 4 panel of judges and sunmed up to 91 pain terms in the scale. As a result, the ranks of pain terms within each of eleven subclasses among the twenty subclasses completely were congruent with the Previous pain ranks, while the ranks of nine subclasses were different from the previous pain ranks. In addition, there was significant relation between sex and pain ranks in skin punctuate pressure pain and cavity pressure. (sp : $\chi$$^2$=5.18 ø=0.26； cp : $\chi$$^2$=5.83 ø=0.24) In conclusion, seven terms from subclasses of inflammatory repeated pain, traction pressure pain, fatigue-related pain, fear-related pain, dull pain, and pulsation. related pain were cancelled. The ranks of four terms in subclasses of incisive Pressure pain and constrictive pressure pain were tentatively rearranged. Ranks of two terms in the tract pain were left as shown in the third study. As a result, six terms must be studied repeatedly for obtaining exact scores from ratio scale.

• 디지털융복합연구
• /
• 제11권10호
• /
• pp.387-394
• /
• 2013

데이터 마이닝은 예측이나 분석을 위해서 많은 양의 데이터에 존재하는 여러 가지의 관계를 추출하는 과정이라고 할 수 있다. 그러한 데이터에는 매우 많은 변수로 인한 차원의 증가로 인하여 계산상의 어려움이 수반되어지고 변수의 중복성과 중요도에 있어서 다양한 통계적 관계가 존재한다. 따라서 동일하거나 유사한 데이터를 같은 그룹으로 형성하는 클러스터 해석은 데이터 마이닝에서 필수적인 요소이다. 본 연구는 범주형 데이터의 분류에서 발생하는 불확실성의 처리를 위해 러프집합을 이용하여 정보 엔트로피를 이용한 새로운 척도를 정의하고 연구 대상에 대한 유사행동을 분석하는 시스템 구현에 그 의의가 있다. 데이터는 평택공업고등학교에서 채집되었고 이를 토대로 제안된 방법이 학생들의 유사행동에 대한 보다 정확한 결과를 보임을 알 수 있었다. 또한 속성의 개수가 10개 이상인 경우에 기본 방법과의 차이를 보이며 취업의사결정에서 학생들의 의식을 기존 방법보다 효과적으로 반영하였다.

• 지역사회간호학회지
• /
• 제12권3호
• /
• pp.620-626
• /
• 2001

Purpose: This study was aimed at investigating the recognition and attitude of inpatients for the purpose of facilitating the implementation of the home health care program in relation to the opening of the Home Care Department in P University Hospital in Pusan. Method: Data were collected from the questionnaires returned by 293 patients, who were admitted at P University Hospital. from May 1 to May 15, 2001 and analyzed using descriptive statistics and the Fisher exact test. Results: In regard to the previous information about the home health care program, 55.6% of the inpatients heard about the name through the advertisement in the hospital. the mass communication, and from acquaintances. The percentage of right answers regarding the knowledge of home health care program was 43.9%. In regard to the acceptance of the home health care program, 97.1 % of patients agreed with the implementation of the home care program. The reasons for acceptance were: the maintenance of the continuity of care, the alleviation of the family burden of time. Conclusion: For the stabilization and successful implementation of a home health care system, it should be accompanied not only by advertisement but also education for patients about the home health care program, and a post-evaluative study after the implementation.