• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.4
• /
• pp.71-78
• /
• 2008

In the case of the railway bridges, uplift forces were occurred at the edge of the segments when vehicular loads were applied. These forces caused the compressive and tensile forces in the fastening system. In the past, a structural analysis has been performed to investigate the safety of fastening system which was modeled with one directional spring elements based on the compressive test of fastening system. In this case, the stiffness of the spring element was obtained from experimental study which was conducted by compressive load. Therefore, to perform rational and exact structural analysis, the translational stiffness of the fastening system obtained from the experimental study applied the tensile load and the rotational stiffness should be considered because it was occurred the tensile force as well as the compressive force in fastening system. In this study, an elastic and inelastic experimental study was performed for six specimens. The translational stiffness along the vertical axis of rail and the rotational stiffness along the strong axis of rail were investigated, also structural behavior of the fastening system was analyzed.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.1
• /
• pp.89-98
• /
• 2012

In this paper, the ratio of parameters in two independent Maxwell distributions is parameter of interest. We proposed test statistics, which converge to standard normal distribution, based on likelihood function. The exact distribution for testing the ratio is hard to obtain. We proposed the signed log-likelihood ratio statistic and the modified signed log-likelihood ratio statistic for testing the ratio. Through simulation, we show that the modified signed log-likelihood ratio statistic converges faster than signed log-likelihood ratio statistic to standard normal distribution. We compare two statistics in terms of type I error and power. We give an example using real data.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.7
• /
• pp.1489-1496
• /
• 2009

This study was done for the determination and excretion profile of adrenosterone and its metabolites in human urine using both liquid chromatography with atmospheric pressure chemical ionization mass spectrometry and gas chromatography with mass spectrometry. Adrenosterone and its two metabolites were detected in human urine after administration a healthy volunteer with 75 mg of adrenosterone. We found that adrenosterone-M1 ($C_{19}H_{26}O_3$) was a reduction and adrenosterone-M2 ($C_{19}H_{26}O_4$) was a hydroxylation at C-ring, which did not know the exact position of the C-ring. The adrenosterone parent was detected by GC/TOF-MS, but not detected by LC/APCI/MS because of low intensity. Adrenosterone and its two metabolites were excreted as their glucuronided fractions. The recovery of this method ranged from 100.7 to 118.4% and the reproducibility and accuracy test were 85.5 to 112.0% and 1.1 to 8.4%, respectively. The excretion studies showed that adrenosterone and its metabolites were detectable in human urine during a 48 h period after oral administration, with maximum level of excretion at 4.1 h. The glucuro-/sulfaconjugated ratio of adrenosterone, M1 and M2 was 0.73 ${\pm}$ 0.03, 0.96 ${\pm}$ 0.06 and 0.89 ${\pm}$ 0.03 (n = 6), respectively. The amounts of adrenosterone excreted in urine were 14.75 ng for 48 h. Also, the maximum level of androsterone and 11$\beta$-hydroxy androsterone, which were endogenous steroids, were reached 4.1 h after the oral administration of adrenosterone.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.585-589
• /
• 2010

It is important for the liquid rocket engine to meet the exact performance requirements in order to guarantee the successful mission of the launch vehicle. Usually, a ground combustion test for the engine is conducted to reduce the performance error and for the tuning. For the gas-generator (GG) cycle engine, this adjustment process can be easily tuned by means of the control valves. A linearized correlation between the process parameters of the control - the combustion chamber pressure and the mixture ratio of engine - and the independent parameter of the control- rotational angle of the control valve - could be suitable to reduce the tuning errors. Also this linearity can reduce the effort for the tuning and make the process more explicit by ensuring a more intuitive control. In this point, we proposed an algorithm in the frame of the in-house-developed program to obtain the control valves' inherent characteristics which satisfy the linearity.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.4
• /
• pp.405-411
• /
• 2014

It needed the calculation of the required tugboat's power to move the damaged vessel to the safe area for reducing the additional damages. In this paper, it was verified the theoretical calculation method on the required power of tugboat through the 93m real ship tests. From the experiments, it was considered that the theoretical calculation method was sufficient to estimate the required power of tugboat. The resistance of the locked propeller was relatively big portions compared with other static resistances such as air resistance, frictional resistance and residual resistance. And dynamic resistance induced by swing movement and yawing was continuously occurred and it also was great effects on the total resistance. In the future, the safety factor will be considered and the exact prediction of ship's resistance will enhance the efficiency of tugboat because of the minimization of safety factor.

• Structural Engineering and Mechanics
• /
• v.31 no.2
• /
• pp.137-152
• /
• 2009

Mechanic behavior of Y-shape thin-walled box girder bridge structure is complex, so one can not exactly hold the mechanical behavior of the Y-shape thin-walled box girder bridge structure through general calculation theory and analytical method. To hold the mechanical behavior better, based on elementary beam theory, by increasing the degree of freedom analytical method, taking account of restrained torsiondistortion angledistortion warp and shearing lag effect at the same time, authors obtain a thin-walled box beam analytical element of 10 degrees of freedom of every node, derive stiffness matrix of the element, and code a finite element procedure. In addition, authors combine the obtained procedure with spatial grillage analytical method, meanwhile, they build a new analytical method that is the spatial thin-walled box girder element grillage analysis method. In order to validate the precision of the obtained analysis method, authors analyze a type Y-shape thin-walled box girder bridge structure according to the elementary beam theory analytical method, the shell theory analytical method and the spatial thin-walled box girder element grillage analysis method respectively. At last, authors test a type Y-shape thin-walled box girder bridge structure. Comparisons of the results of theory analysis with the experimental text show that the spatial thin-walled box girder element grillage analysis method is simple and exact. The research results are helpful for the knowledge of the mechanics property of these Y-shape thin-walled box girder bridge structures.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.7
• /
• pp.938-944
• /
• 2000

Recently, micro fin tube is widely used to heat exchanger for high performance. And, as the alternative refrigerants for R-22, hydrocarbons such as R-290, R-600 and R-600a are very promising because of their low GWP and ODP. Thus, R-290 was used as working fluid in this study. Most design of heat exchanger had been based on heat transfer characteristics of pure refrigerant although refrigerant oil exists in the refrigeration cycles. So, the influence of oil on heat transfer characteristics have to be considered for investigating exact evaporation heat transfer characteristics. But, this is an unresolved problem of refrigeration heat transfer. Therefore the influence of the refrigeration oil to the evaporation heat transfer characteristics of R-290 were conducted in a horizontal micro tin tube. The mineral oil was used as refrigeration oil. The experimental apparatus consisted of a basic refrigeration cycle and a system for oil concentration measurement. Test conditions are as the follows; evaporation temperature $5^{\circ}C$, mass velocity 100 $kg/m^2s$, heat flux 10 $kW/m^2$, oil concentration 0, 1.3, 3.3, 5.7 wt.%, and quality $0.07{\sim}1.0$. When refrigeration oil was entered, oil foaming was observed at the low quality region. And, very small bubbles were observed as quality was increased. Pressure drop and heat transfer coefficient increased as the concentration of refrigeration oil increased to 5 wt.%.. The performance index of heat exchanger was the highest near 3.3 wt.%.

• Journal of Korean Academy of Nursing
• /
• v.16 no.2
• /
• pp.13-28
• /
• 1986

The main purpose of th study was to evaluate he validity of Korean Pain Measurement Tool composed of pain terms. The specific purposes of this study were 1. to examine whether pain intensities of pain terms are congruent with those classified in three previous studies. 2. to evaluate the relative intensity of each term by panel of judges. 3. to explore the difference of ranks of pain terms according to the sex, education, and ages. One hundred and sixty normal individuals were selected by 2$\times$2$\times$4 sampling design. Sex (male, female), education (high school, college), and age (20s, 30s, 40s, 50s) were matched. Each individual was asked to rate the ranks of 3~8 pain terms in each subclass. The data measured by ordinal scale were transformed to the interval scale to compare with the pain intensities gained from the previous study. The pain ranks different from previous results were finally rearranged or cancelled through the consultation of 4 panel of judges and sunmed up to 91 pain terms in the scale. As a result, the ranks of pain terms within each of eleven subclasses among the twenty subclasses completely were congruent with the Previous pain ranks, while the ranks of nine subclasses were different from the previous pain ranks. In addition, there was significant relation between sex and pain ranks in skin punctuate pressure pain and cavity pressure. (sp : $\chi$$^2$=5.18 ø=0.26； cp : $\chi$$^2$=5.83 ø=0.24) In conclusion, seven terms from subclasses of inflammatory repeated pain, traction pressure pain, fatigue-related pain, fear-related pain, dull pain, and pulsation. related pain were cancelled. The ranks of four terms in subclasses of incisive Pressure pain and constrictive pressure pain were tentatively rearranged. Ranks of two terms in the tract pain were left as shown in the third study. As a result, six terms must be studied repeatedly for obtaining exact scores from ratio scale.

• Journal of Digital Convergence
• /
• v.11 no.10
• /
• pp.387-394
• /
• 2013

Data mining is the process of discovering hidden, non-trivial patterns in large amounts of data records in order to be used very effectively for analysis and forecasting. Because hundreds of variables give rise to a high level of redundancy and dimensionality with time complexity, they are more likely to have spurious relationships, and even the weakest relationships will be highly significant by any statistical test. Hence cluster analysis is a main task of data mining and is the task of grouping a set of objects in such a way that objects in the same group are more similar to each other than to those in other groups. In this paper system implementation is of great significance, which defines a new definition based on information-theoretic entropy and analyse the analogue behaviors of objects at hand so as to address the measurement of uncertainties in the classification of categorical data. The sources were taken from a survey aimed to identify of job guidance from students in high school pyeongtaek. we show how variable precision information-entropy based rough set can be used to group student in each section. It is proved that the proposed method has the more exact classification than the conventional in attributes more than 10 and that is more effective in job guidance for students.

• Research in Community and Public Health Nursing
• /
• v.12 no.3
• /
• pp.620-626
• /
• 2001

Purpose: This study was aimed at investigating the recognition and attitude of inpatients for the purpose of facilitating the implementation of the home health care program in relation to the opening of the Home Care Department in P University Hospital in Pusan. Method: Data were collected from the questionnaires returned by 293 patients, who were admitted at P University Hospital. from May 1 to May 15, 2001 and analyzed using descriptive statistics and the Fisher exact test. Results: In regard to the previous information about the home health care program, 55.6% of the inpatients heard about the name through the advertisement in the hospital. the mass communication, and from acquaintances. The percentage of right answers regarding the knowledge of home health care program was 43.9%. In regard to the acceptance of the home health care program, 97.1 % of patients agreed with the implementation of the home care program. The reasons for acceptance were: the maintenance of the continuity of care, the alleviation of the family burden of time. Conclusion: For the stabilization and successful implementation of a home health care system, it should be accompanied not only by advertisement but also education for patients about the home health care program, and a post-evaluative study after the implementation.