• 제목/요약/키워드: Evolution Ratio

검색결과 488건 처리시간 0.039초

Evolution of primary stars in Pop III binary systems

  • Lee, Hunchul;Yoon, Sung-Chul
    • 천문학회보
    • /
    • 제41권1호
    • /
    • pp.77.4-78
    • /
    • 2016
  • Binary interactions may have significant impact on Pop III stellar evolution. Pop III single star evolution indicates that for primary masses less than $20M_{\odot}$, no significant binary mass transfer would occur before core helium exhaustion. We perform binary system evolution for various primary masses ($20M_{\odot}$ < $M_1$ < $60M_{\odot}$) and initial periods under same mass ratio $M_2/M_1=0.9$, and follow the evolution and mass transfer of the primary star. If binary mass transfer occurs during post main sequence, the primary star does not evolve into naked helium star and still contain significant hydrogen in the envelope. During the post mass transfer phase, the primary star evolves redward, and does not become sufficiently hot to enhance the number of ionizing photons, compared to the case of single star evolution for a given initial mass. This result implies that primary stars of massive Pop III binary systems would have little contribution to the reionization in the early universe. Given the large hydrogen content ($0.326-1.793M_{\odot}$), the primary stars that underwent stable mass transfers would explode as a Type IIb supernova, and it would be difficult for Pop III binary stars to produce Type Ib/c supernovae that look similar to those found in the local universe.

  • PDF

Pure Density Evolution of the Ultraviolet Quasar Luminosity Function at 2 < z < 6

  • Kim, Yongjung;Im, Myungshin
    • 천문학회보
    • /
    • 제46권1호
    • /
    • pp.53.2-53.2
    • /
    • 2021
  • Quasar luminosity function (QLF) shows the active galactic nucleus (AGN) demography as a result of the combination of the growth and the evolution of black holes, galaxies, and dark matter halos along the cosmic time. The recent wide and deep surveys have improved the census of high-redshift quasars, making it possible to construct reliable ultraviolet (UV) QLFs at 2 < z < 6 down to M1450 = -23 mag. By parameterizing these up-to-date observed UV QLFs that are the most extensive in both luminosity and survey area coverage at a given redshift, we show that the UV QLF has a universal shape, and their evolution can be approximated by a pure density evolution (PDE). In order to explain the observed QLF, we construct a model QLF employing the halo mass function, a number of empirical scaling relations, and the Eddington ratio distribution. We also include the outshining of AGN over its host galaxy, which made it possible to reproduce a moderately flat shape of the faint end of the observed QLF (slope of ~ -1.1). This model successfully explains the observed PDE behavior of UV QLF at z > 2, meaning that the QLF evolution at high redshift can be understood under the framework of halo mass function evolution. The importance of the outshining effect in our model also implies that there could be a hidden population of faint AGNs (M1450 > -24 mag), which are buried under their host galaxy light.

  • PDF

알루미늄 5182-폴리프로필렌 샌드위치 판재의 소성변형비 및 집합조직의 발달 (Pastic Strain Ratio and Texture Evolution of Aluminum/Polypropylene/Aluminum Sandwich Sheets)

  • 김기주;정효태
    • 한국자동차공학회논문집
    • /
    • 제14권2호
    • /
    • pp.57-66
    • /
    • 2006
  • AA5182-polypropylene sandwich sheet was manufactured, and the mechanical properties evaluation was executed in order to identify $L{\ddot{u}}ders$ band that causes fabrication process problem and especially surface roughness. To identify formability, deformation behavior, plastic strain ratio (R-value) and pole figure were measured, and texture analysis was performed. In the case of sandwich sheet, the unstable deformation behavior has decreased. As well, for sandwich sheet, A1 skin could manage the most of load, and the elongation has improved about 45% more than that of A1 skin. The plastic strain ratio of A1 skin and sandwich panel, which indicates serration behavior, was obtained from instantaneous plastic strain ratio evaluation. Also, the planar anisotropy of sandwich sheet has decreased more than that of A1 skin. According to these results, the sandwich sheet produced lightening effect and could control unstable deformation characteristic, that is, surface roughness caused by $L{\ddot{u}}ders$ band. Furthermore, it was proved that the texture control of the rolling attachment of A1 skin is necessary to improve the formability of the sandwich panel.

I-131 SPECT/CT에서 Ringing Artifact 감소를 위한 다양한 Filter값의 적용 (The Evaluation of Images with Various Filters in I-131 SPECT/CT)

  • 김하균;김수미;우재룡;오소원;이재성;김유경
    • 핵의학기술
    • /
    • 제18권1호
    • /
    • pp.62-68
    • /
    • 2014
  • 치료 후 I-131 SPECT/CT는 잔류 갑상선 위치확인 및 전이유무를 판단하기 위하여 시행된다. 잔류 갑상선에 집적이 심한 경우 영상은 ringing artifact에 의하여 왜곡된다. 본 연구는 ringing artifact를 제거하고 영상의 질을 향상시키기 위한 적절한 post-filter의 적용에 대하여 제시하고자 한다. 본 실험은 hollow sphere와 아크릴통으로 구성된 phantom을 사용하여 SPECT/CT Discovery 670 (GE Healthcare, USA) 장비로 수행하였다. I-131용액을 hollow sphere에 184, 46, 9.2, 2.3 MBq/cc, 아크릴통에 46 kBq/cc을 각각 주입하였고 sphere 대 background의 비를 4000:1, 1000:1, 200:1, 50:1로 설정하였다. 데이터는 다음과 같은 조건으로 획득하였다(HEGP collimator 사용, Attenuation collection 적용, scan time 40 secs/frame, step angle 6도, scan mode non circular, evolution 적용과 미적용). 획득된 데이터는 OSEM (iteration 2, subset 10) 방식으로 재구성하였다. Post-filer의 사용에 따른 이미지의 변화를 보기 위해 3가지의 다른 post-filer들이 사용되었다(butterworth filter cut-off: 0.38, 0.43, 0.48, 0.53, 0.58, hanning filter cut-off: 0.8, 0.85, 0.9, 0.95, 1, gaussian FWHM: 3, 3.4, 4, 4.5, 5). 각각의 데이터는 MRIcro를 사용하여 contrast ratio, background variability를 분석하였고 e.soft ROI tool을 사용하여 FWHM값을 구하였다. Evolution을 적용한 경우, 모든 결과에서 contrast ratio값이 높게 나타났다. Evolution을 적용하지 않은 경우 star artifact 등 왜곡이 발생하였고 영상의 질이 현저히 낮아짐을 확인할 수 있었다. 4000:1, 1000:1, 200:1의 경우, butterworth filter 사용 시 ringing artifact가 발생하였으며 cut-off값이 커질수록 artifact가 감소하였다. Hanning filter를 사용한 경우 ringing artifact는 발생하지 않았다. Contrast ratio와 FWHM값이 butterworth filter나 hanning filter 적용 시 우수하였다. Gaussian filter경우 contrast ratio와 FWHM값에서 저조한 결과를 얻을 수 있었다. 50:1의 경우, 모든 경우에서 ringing artifact가 발생하지 않았다. Butterworth filter를 적용한 경우 가장 높은 contrast ratio와 가장 우수한 FWHM값을 나타내었다. 본 논문을 통하여 I-131 SPECT에서 ringing artifact가 발생 할 경우(thyroid remnant를 포함) hanning filter를 사용하여 영상을 재구성하고, ringing artifact가 발생하지 않을(remnant thyroid를 포함하지 않음) 경우 butterworth filter를 사용하여 재구성하는 것이 바람직하다는 사실을 알 수 있었다.

  • PDF

TIME EVOLUTION OF SCOUR AROUND BRIDGE ABUTMENTS

  • Francesco Ballio;Enrico Orsi
    • Water Engineering Research
    • /
    • 제2권4호
    • /
    • pp.243-259
    • /
    • 2001
  • Local phenomena around bridge piers and abutments are generally considered to be similar, nevertheless the presence of the incoming boundary layer on the side wall in the abutment case generates extra pressure gradients and consequently a more complex vortex pattern. In the literature, experimental data for bridge abutments are relatively scarce; in particular almost no data are available for the time evolution of the scour. In this work we present the results of several long duration (3 days longrightarrow5weeks) clear water scour laboratory tests around bridge abutments; the time evolution of the erosion process is analysed with respect to local and global characteristic values (maxima, volume, hole shape). In particular we analyse the effect of the constriction ratio b/B between the transversal obstacle dimension and the flume width: in many practical situations abutments (or piers) obstruct a significant portion of the channel, so that the average acceleration due to constriction is expected to increase the scour effects of the local acceleration around the obstacle. Measured values for maximum scour are poorly predicted by literature formulas. Scour depths are positively correlated with the constriction ratio, but increases are smaller than expected from literature indications. Experimental results show that models for bridge piers cannot be directly applied to abutments; in particular, time scales for the latter are significantly larger than for piers.

  • PDF

3차원 미세조직에 기반한 잔류응력 하의 이상 조직강의 소성변형률비 예측 (Prediction of the Plastic Strain Ratio Evolution of a Dual-phase Steel)

  • 하진진;이진우;이명규;;김지훈
    • 소성∙가공
    • /
    • 제24권6호
    • /
    • pp.395-399
    • /
    • 2015
  • A microstructure-based finite element simulation was conducted to predict the plastic strain ratio (R-value) of a dual-phase (DP) steel. The representative volume elements (RVEs) concept was adopted for the image-based FE modeling and a 3D model was constructed using sequential 2D images. Each phase was considered with the von-Mises yield criterion and the Swift model. The Swift parameters were defined by the empirical equations based on the chemical composition. The developed model was applied to analyze the effect of residual stress on the R-value and stress distribution. In order to consider the residual stress development after cold rolling, 10 % compression was applied in the thickness direction and unloaded before the tensile stress was applied in the rolling direction. The results showed a reasonable prediction for the R-value evolution: a sharp increase at small strains was well described and a transition followed in the downward direction. The R-value evolution was analyzed using the stress distribution change on the π-plane

한국산(韓國産) 산공재(散孔材)의 해부학적(解剖學的) 특성(特性)에 관한 비교연구(比較硏究)(I) -단순상관(單純相關)과 주성분(主成分) 분석(分析)에 의한 특성(特性)- (Comparative Anatomy of Diffuse-Porous Woods Grown in Korea (I) -Characteristics by Simple Correlation and Principal Component Analysis-)

  • 정연집;이필우
    • Journal of the Korean Wood Science and Technology
    • /
    • 제23권4호
    • /
    • pp.46-53
    • /
    • 1995
  • The anatomy of Korean diffuse-porous woods, 36 families, 75 genera, 145 species, 215 specimens was described and analyzed. Sixteen wood anatomical characters, habit and phenology factors were determined by simple correlation and principal component analysis. Strong positive correlations were found between vessel element length and fiber length, ray width and ray height, simple pits of fiber wall and paratracheal parenchyma distribution. The results of principal component analysis (PCA) disclose the primitive characteristics and the direction of xylem evolution of Korean diffuse-porous woods. The xylem evolution scenario for Korean dicotyledonous woods is considered to be developed in the direction of decreasing trends of vessel frequency, vessel element length, and length/diameter(L/D) ratio of vessel element but increasing trends of vessel diameter, fiber length/vessel element length(F/V) ratio, libriform wood fibers, simple perforation, and homogeneous ray composition. Increase of vessel diameter and decrease of vessel frequency seem to be related to the improvement of conductive efficiency, and increase of the vessel element length and occurrence of scalariform perforation in vessel element may be related to enhanced of conductive safety. Also the libriform wood fibers and ray features appear to have relationship with mechanical support and nutrient metabolism, respectively.

  • PDF

Energy evolution characteristics of coal specimens with preformed holes under uniaxial compression

  • Wu, Na;Liang, Zhengzhao;Zhou, Jingren;Zhang, Lizhou
    • Geomechanics and Engineering
    • /
    • 제20권1호
    • /
    • pp.55-66
    • /
    • 2020
  • The damage or failure of coal rock is accompanied by energy accumulation, dissipation and release. It is crucial to study the energy evolution characteristics of coal rock for rock mechanics and mining engineering applications. In this paper, coal specimens sourced from the Xinhe mine located in the Jining mining area of China were initially subjected to uniaxial compression, and the micro-parameters of the two-dimensional particle flow code (PFC2D) model were calibrated according to the experimental test results. Then, the PFC2D model was used to subject the specimens to substantial uniaxial compression, and the energy evolution laws of coal specimens with various schemes were presented. Finally, the elastic energy storage ratio m was investigated for coal rock, which described the energy conversion in coal specimens with various arrangements of preformed holes. The arrangement of the preformed holes significantly influenced the characteristics of the crack initiation stress and energy in the prepeak stage, whereas the characteristics of the cumulative crack number, failure pattern and elastic strain energy during the loading process were similar. Additionally, the arrangement of the preformed holes altered the proportion of elastic strain energy Ue in the total energy in the prepeak stage, and the probability of rock bursts can be qualitatively predicted.

알루미늄 5182 압연 판재의 어닐링 집합조직 (Textures Evolution of Rolled AA5182 Alloy Sheets after Annealing)

  • 김기주;신광선;정효태;백영남
    • 한국자동차공학회논문집
    • /
    • 제13권6호
    • /
    • pp.128-134
    • /
    • 2005
  • In order to fabricate the aluminum alloys with good drawability, the textures evolution of the AA5182 sheets after rolling and annealing was studied. The measurement of the deformation textures was carried out for the sheets which were cold rolled with high reduction ratio by using the symmetric roll. In addition, the change of the recrystallization texture was investigated after heat-treatments of the rolled sheets with various heat treatment conditions. Rolling without lubrication and subsequent annealing led to the formation of favorable $rot-C_{ND}\;\{001\}<110>\;and\;{\gamma}-fiber ND//<111>$ textures in AA5182 sheets. From the results, the ${\gamma}$-fiber ND//<111> component well evolved during rolling at highest reduction ratio (over $90\%$, l/d parameter of 6.77). Among shear deformation textures, the ${\gamma}$-fiber ND//<111> was not rotated in holding time of $180\~7,200$ seconds at $350^{\circ}C$. The Monte-Carlo technique was used and could be representatively simulated these textures evolution during recrystallization.

Distribution of Baryonic Matter in Dark Matter Halos: Effect of Dynamical Friction

  • 배영복;이형목
    • 천문학회보
    • /
    • 제36권1호
    • /
    • pp.47.1-47.1
    • /
    • 2011
  • We studied the evolution of the two mass components system with NFW initial density distribution by direct integration of the Fokker-Planck equations. The low mass component is regarded the dark matter particles while the high mass component is assumed to be conglomerates of baryonic matter in order to depict the 'stars'. While the true mass ratio between these two types of particles should be extremely large, our adopted mass ratio is about 1000 beyond which the dynamical evolution and density distribution tend to converge. Since the dynamical evolution is dominated by the dynamical friction, the high mass component slowly moves toward the central part, and eventually undergoes the core collapse. The system reaches the core-collapse at about $7.1{\times}10^{-3}$ $t_{fh}$ in NFW models, where $t_{fh}$is the dynamical friction time at half-mass radius. The distribution of the high mass component is well fitted by the Sersic profiles or modified Hubble profile when the mass segregation is established. From these results, the surface brightness of elliptical galaxies may be explained by the high mass component experiencing dynamical friction by the dark matter particles. In order for the mass segregation to be effective within Hubble time, the mass of the luminous component should be greater than $10^5M_{\bigodot}$.

  • PDF