• Journal of the Korea Society for Simulation
• /
• v.18 no.4
• /
• pp.29-37
• /
• 2009

This paper deals with the priority queues exploited for the management of future event list in discrete event simulation. Among several implementations of priority queues, MList which consists of 3 tiers has been known to reveal the good performance. To improve the performance of MList, Dynamic-Shift MList (DSMList) is proposed in this paper. Whenever the number of events in tier 3 exceeds a critical number, DSMList creates new calendar queue in tier 2, then moves events from Tier 3 to the calendar queue. Instead of one calendar queue, therefore, a number of calendar queues are dynamically created in tier 2. Throughout experiments for the performance evaluation of DSMList, it shows that at least 20% improvement is obtained compared with MList.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.581-586
• /
• 2005

In this study, a hazard list is developed for accidents/incidents of Korean railway through identification of the risk sources. The risk sources are classified by the progress of the accidents/incidents, which consists of cause, triggering event, and failure of the safety system. The hazard list of railway accidents/incidents of Korea is then developed through extensive review of both domestic and foreign data for railway accidents/incidents risk sources. The list is refined for each of six subsystems of the railway system, which includes safety management system, operation management, human error and qualification management, installations and equipments, external hazard, and railway level crossing.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.3
• /
• pp.84-99
• /
• 2021

Flight data from operational quality assurance programs plays a significant role in identifying factors as one of the key data in the development of proactive and preventive aviation safety management technologies based on data. The list of events in the flight quality assurance program recommended by the FAA differs from the list set and managed by airlines themselves and is based on the frequency of occurrence rather than the severity of individual events. In this work, we compared the list of FOQA events presented by the FAA with the list of some domestic airlines. We also investigate the severity priorities of events for airline captains and conduct research on how to improve the operation of the operational quality assurance program.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.1
• /
• pp.83-101
• /
• 2016

This paper suggests an event-based scenario manager capable of creating and editing a scenario for shipbuilding process simulation based on multibody dynamics. To configure various situation in shipyards and easily connect with multibody dynamics, the proposed method has two main concepts: an Actor and an Action List. The Actor represents the anatomic unit of action in the multibody dynamics and can be connected to a specific component of the dynamics kernel such as the body and joint. The user can make a scenario up by combining the actors. The Action List contains information for arranging and executing the actors. Since the shipbuilding process is a kind of event-based sequence, all simulation models were configured using Discrete EVent System Specification (DEVS) formalism. The proposed method was applied to simulations of various operations in shipyards such as lifting and erection of a block and heavy load lifting operation using multiple cranes.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.1
• /
• pp.88-93
• /
• 2023

In software engineering, requirement analysis is an important task throughout the process and takes up a high proportion. However, factors that fail to analyze requirements include communication failure, different understanding of the meaning of requirements, and failure to perform requirements normally. To solve this problem, we derived actors and behaviors using morpheme analysis and BERT algorithms in the Korean requirement document and constructed them as ontologies. A chatbot system with ontology data is constructed to derive a final system event list through Q&A with users. The chatbot system generates the derived system event list as a requirement diagram and a requirement specification and provides it to the user. Through the above system, diagrams and specifications with a level of coverage complied with Korean requirement documents were created.

• International Journal of Quality Innovation
• /
• v.9 no.3
• /
• pp.15-27
• /
• 2008

As a sign of international quality system, ISO9000 certification has been adopted by more and more enterprises. In recent five years, there have been 560,000 certified companies in Europe and America, and there have been more than 390,000 ones in China. It has being attracted many quality scholars' attentions whether ISO9000 certification can bring more benefits to certified companies or not. This paper investigates the ISO9000 certification effect on market performance by the samples from Chinese list companies in shanghai stock exchange. Considering ISO9000 certification as an event, a certification effect model will be set up by means of the event study method, which takes abnormal return rate as a basic indicator to measure the ISO9000 certification effect on Chinese market performance in different event times. Investigation results show that the Chinese certified companies have some positive effects on market performance in the short term. From a long standpoint, the relation between certification and performance has a positive trend.

• The Korean Journal of Emergency Medical Services
• /
• v.12 no.3
• /
• pp.5-15
• /
• 2008

Purpose : This study is a descriptive research to provide basic factors of posttraumatic stress in Firefighters. This study was carried out to develop the effective program for the fire fighters to cope with the posttraumatic stress following the disasters. Methods : The questionnaires were collected among fire fighters who serviced in K and I community from April 1 to June 30 in 2008. Total 304 questionnaires were analyzed by SPSS WIN program for descriptive statistics, Pearson's correlation coefficient and t-test. Results : 1. 48.0% of 300 fire fighters were at the age of 31-40, and 42.3% were under 30. 2. Work burden had a significant difference of 2.30 in low-risk group, 2.60 in high-risk group(t-value=-3.85, p=0.00). However, life event had no significant difference 0.79 event in low-risk group, 1.41 event in high-risk group(t-value=-2.27, p=0.24). 3. Concerning posttraumatic stress factors, there was positive correlation between mobilization impact level r=0.38(P<0.01), work burden r=0.38(p<0.01), and life event r=0.27(p<0.01). 4. According to the Symptom Check List-Revised(SCL-90-R), somatization had a significant differences(t-value=5.46, p=0.00), obsessive-compulsive(t-value=7.16, p=0.00), interpersonal sensitivity(t-value=6.15, p=0.00), depression(t-value=6.62, p=0.00), anxiety (t-value=7.33, p=0.00), hostility(t-value=5.94, p=0.00), phobia anxiety(t-value=6.85, p=0.00), paranoid ideation(t-value=5.55, p=0.00), psychotism(t-value=6.52, p=0.00) in low-risk and high-risk group. Conclusion : As a consequence, mobilization impact, work burden, and life event were the influential factors on posttraumatic stress. Also, high-risk group revealed significantly higher score on all 9 scales. The information obtained from surveys made recommendation to develop the intervention of stress management to control mobilization impact and posttraumatic stress.

• Applied Biological Chemistry
• /
• v.50 no.4
• /
• pp.245-252
• /
• 2007

FTA (fault tree analysis), an analytical method for system failure management, was employed in the management of faults in running PCR analysis. PCR is executed through several processes, in which the process of PCR machine operation was selected for the analysis by FTA. The reason for choosing the simplest process in the PCR analysis was to adopt it as a first trial to test a feasibility of the FTA approach. First, fault events-top event, intermediate event, basic events-were identified by survey on expert knowledge of PCR. Then those events were correlated deductively to build a fault tree in hierarchical structure. The fault tree was evaluated qualitatively and quantitatively, yielding minimal cut sets, structural importance, common cause vulnerability, simulation of probability of occurrence of top event, cut set importance, item importance and sensitivity. The top event was 'errors in the step of PCR machine operation in running PCR analysis'. The major intermediate events were 'failures in instrument' and 'errors in actions in experiment'. The basic events were four events, one event and one event based on human errors, instrument failure and energy source failure, respectively. Those events were combined with Boolean logic gates-AND or OR, constructing a fault tree. In the qualitative evaluation of the tree, the basic events-'errors in preparing the reaction mixture', 'errors in setting temperature and time of PCR machine', 'failure of electrical power during running PCR machine', 'errors in selecting adequate PCR machine'-proved the most critical in the occurrence of the fault of the top event. In the quantitative evaluation, the list of the critical events were not the same as that from the qualitative evaluation. It was because the probability value of PCR machine failure, not on the list above though, increased with used time, and the probability of the events of electricity failure and defective of PCR machine were given zero due to rare likelihood of the events in general. It was concluded that this feasibility study is worth being a means to introduce the novel technique, FTA, to the management of faults in running PCR analysis.

• The Journal of Information Systems
• /
• v.27 no.4
• /
• pp.35-70
• /
• 2018

Purpose Recently, 3D factory simulation technology has emeged as a powerful tool for modeling and analysis of a wide range of production systems, however, it has been not paid much attention in Korea. In this context, this paper aims to provide a comprehensive literature review on discrete event simulation softwares and introduce a promising 3D factory simulation software called FlexSim and its application domains. Design/methodology/approach In order to demonstrate worldwide popularity and technical superiority of FlexSim software, we analyzed the recent list of rankings for commercial discrete simulation softwares released by winter simulation conference and users' opinions collected from business software review site. Moreover, several main application domains are derived from a review of the previous research papers that deal with applications of FlexSim software. Findings FlexSim software recently moved up the list of major commercial simulation softwares, and technical superiorities of the software demonstrate that it is a promising tool for practical 3D factory simulation. Moreover, recent research papers suggest that FlexSim software can be used as a component of smart factory system. In this context, it is expected that FlexSim software becomes more popular in the era of industry 4.0.

• Journal of the Korea Society for Simulation
• /
• v.20 no.1
• /
• pp.87-96
• /
• 2011

DEVS(Discrete Event Systems Specification) is a set theoretic formalism developed for specifying discrete event system. For execution of DEVS, we need an execution environment, which consists of simulation engine and models interpreted by the simulation engine. Common existing environments use hierarchical scheduling algorithm for DEVS execution. This hierarchical scheduling is a proper algorithm for DEVS execution because of hierarchical and modular characteristics. But this algorithm has overheads owing to message passing and time management. To overcome these overheads, we apply event-oriented simulation to DEVS execution and we remove hierarchical overheads. In eventoriented simulation, the scheduling of model execution is performed by events and event list. We propose three event-oriented execution environments for DEVS and experiment about the performance of our proposed environments in comparison with the existing execution environment using the hierarchical scheduling. The experimental results show our environments works better than existing environment using the hierarchical scheduling.