• The Journal of the Korea Contents Association
• /
• v.8 no.1
• /
• pp.308-317
• /
• 2008

The objects real time rendered in the 3D cyber space can interact with each others according to the events which are happened when satisfying some conditions. But to representing the behaviors with these interactions, too many event conditions are considered because each behavior pattern and event must be corresponded in a one-to-one ratio. It leads to problems which increase the system complexity. So, in this paper, we try to physical method based on elasticity force for representing more realistic behaviors of AI fish and apply to the deformable multi-detection sensor, so we suggest the new method which can create the various behavior patterns responding to one evasion event.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.109-114
• /
• 2013

The biological active points (BAP) are known as low resistance spots or good electro-permeable points. In this paper, a new method for BAP detection using the bio-impedance measurement system based on the adaptive frequency tracking filter (AFTF) and the transition event detector is presented. Also, the microcontroller process continuous time demodulation of the modulated signal by multi frequency components using the AFTF. The transition event detector based on the phase space method is applied about each frequency using the BAP equivalent model which is proposed.

• Nuclear Engineering and Technology
• /
• v.44 no.7
• /
• pp.755-766
• /
• 2012

A Binary Decision Diagram (BDD) is a graph-based data structure that calculates an exact top event probability (TEP). It has been a very difficult task to develop an efficient BDD algorithm that can solve a large problem since its memory consumption is very high. Recently, in order to solve a large reliability problem within limited computational resources, Jung presented an efficient method to maintain a small BDD size by a BDD truncation during a BDD calculation. In this paper, it is first identified that Jung's BDD truncation algorithm can be improved for a more practical use. Then, a more efficient truncation algorithm is proposed in this paper, which can generate truncated BDD with smaller size and approximate TEP with smaller truncation error. Empirical results showed this new algorithm uses slightly less running time and slightly more storage usage than Jung's algorithm. It was also found, that designing a truncation algorithm with ideal features for every possible fault tree is very difficult, if not impossible. The so-called ideal features of this paper would be that with the decrease of truncation limits, the size of truncated BDD converges to the size of exact BDD, but should never be larger than exact BDD.

• Journal of National Security and Military Science
• /
• s.3
• /
• pp.197-242
• /
• 2005

Active catalog is a kind of digital content that enables consumers to test the functions and features of products from their PCs as if they were using it in real life, by simulating the actions and responses of the product. This new type of interactive digital content can be used extensively to make sales personnel training manuals, sales tools, user manuals and user trouble shooting documents. With active catalogs, companies will be able to compare different designs, show actions according to different functions, and evaluate user reaction to new products without having to produce a single physical prototype or mock-up. At the same time, consumers will be able to understand and 'operate' the product and make well-informed purchase decisions. In this paper, we present a visual event-driven modeling tool, PlayMo, for creating active catalogs, analyze the advantages of using PlayMo, describe the event-driven method used by PlayMo and also introduce two enhanced characteristics of the Event Flow Chart with which the events in PlayMo are structured. Interactive digital content by using the PlayMo3D makes easy, simple and effective design for e-learning, e-catalogue, e-marketing/sales, e-prototyping, customer support, etc. Through its application-ready 3D function visualization solution, engineers and designers can rapidly turn a CAD design model into a 3D interactive virtual product, and the effective function prototyping job can be also completed within a minute.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.3
• /
• pp.451-458
• /
• 2012

The voluntary EMG (vEMG) signal from electrically stimulated muscle is very useful for feedback control in functional electrical stimulation. However, the recorded EMG signal from surface electrodes has unwanted stimulation artifact and M-wave as well as vEMG. Here, we propose an event-synchronous adaptive digital filter for the suppression of stimulation artifact and M-wave in this application. The proposed method requires a simple experimental setup that does not require extra hardware connections to obtain the reference signals of adaptive digital filter. For evaluating the efficiency of this proposed method, the filter was tested and compared with a least square (LS) algorithm using previously measured data. We conclude that the cancellation of both primary and residual stimulation artifacts is enhanced with an event-synchronous adaptive digital filter and shows promise for clinical application to rehabilitate paretic limbs. Moreover because this algorithm is far simpler than the LS algorithm, it is portable and ready for real-time application.

• The Journal of Information Systems
• /
• v.17 no.3
• /
• pp.25-37
• /
• 2008

In a fault tree analysis, an uncertainty importance measure is often used to assess how much uncertainty of the top event probability (Q) is attributable to the uncertainty of a basic event probability ($q_i$), and thus, to identify those basic events whose uncertainties need to be reduced to effectively reduce the uncertainty of Q. For evaluating the measures suggested by many authors which assess a percentage change in the variance V of Q with respect to unit percentage change in the variance $v_i$ of $q_i$, V and ${\partial}V/{\partial}v_i$ need to be estimated analytically or by Monte Carlo simulation. However, it is very complicated to analytically compute V and ${\partial}V/{\partial}v_i$ for large-sized fault trees, and difficult to estimate them in a robust manner by Monte Carlo simulation. In this paper, we propose a method for evaluating the measure using discretization technique and Monte Carlo simulation. The proposed method provides a stable uncertainty importance of each basic event.

• Water for future
• /
• v.27 no.3
• /
• pp.145-158
• /
• 1994

The linear reservoir rainfall-runoff system was developed as a rainfall-runoff event simulation model. It was achieved from large modification of runoff function method. There are six parameters in the model. Hydrologic losses consist of some quantity of initial loss and some ratio of rainfall intensity followed by initial loss. The model has analytical routing equations. Hooke and Jeeves algorithm was used to model calibration. Parameters were estimated for flood events from '84 to '89 at Seomyeon and Munmak stream gauges, and the trends of major parameters were analyzed. Using the trends, verifications were performed for '90 flood event. Because antecedent fainfalls affect initial loss, future researches are required on such effects. The estimation method of major parameters should also be studied for real-time forecasting.

• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.160-167
• /
• 2014

To determine a proper ASIL for each hazardous event with a proper safety goal, the right classes should first be determined for the three properties of the hazardous event; (i) severity of harm from the resultant accident, (ii) exposure to the relevant operational situation, and (iii) controllability to avoid the induced risks. ASIL can be clearly determined with right classes of these three properties. But no specific methodologies or processes for their classification can be found in ISO 26262, except only a rough guideline with a simplified set of illustrative tables. In this paper, we try to present a systematic model for classifying the three properties of the hazardous event and suggest a refined procedure of ASIL determination. The proposed model provides a specific method to get a more objective ASIL compared with that in the standard. Scrutinizing the current methodology, we develop a refined method and also provide an illustrative example.

• Nuclear Engineering and Technology
• /
• v.49 no.3
• /
• pp.517-524
• /
• 2017

Cyber security is an important issue in the field of nuclear engineering because nuclear facilities use digital equipment and digital systems that can lead to serious hazards in the event of an accident. Regulatory agencies worldwide have announced guidelines for cyber security related to nuclear issues, including U.S. NRC Regulatory Guide 5.71. It is important to evaluate cyber security risk in accordance with these regulatory guides. In this study, we propose a cyber security risk evaluation model for nuclear instrumentation and control systems using a Bayesian network and event trees. As it is difficult to perform penetration tests on the systems, the evaluation model can inform research on cyber threats to cyber security systems for nuclear facilities through the use of prior and posterior information and backpropagation calculations. Furthermore, we suggest a methodology for the application of analytical results from the Bayesian network model to an event tree model, which is a probabilistic safety assessment method. The proposed method will provide insight into safety and cyber security risks.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.2
• /
• pp.138-147
• /
• 2013

The liquefaction process system is regarded as primary among all topside systems in LNG FPSO. This liquefaction process system is composed of many types of equipment. LNG equipment on offshore plants has quite different demands on the equipment compared to traditional onshore LNG plants, so the reliability analysis of this process system needs to be performed. This study investigates how DEVS formalism for discrete event simulation can be used to reliability analysis of the liquefaction cycle for LNG FPSO. The reliability analysis method based on DEVS formalism could be better model for reflecting the system configuration than the conventional reliability analysis methods, such as fault tree analysis and event tree analysis.