• Animal Bioscience
• /
• v.36 no.7
• /
• pp.1003-1009
• /
• 2023

Objective: The objective was to compare (pedigree-based) best linear unbiased prediction (BLUP), genomic BLUP (GBLUP), and single-step GBLUP (ssGBLUP) methods for genomic evaluation of growth traits in a Mexican Braunvieh cattle population. Methods: Birth (BW), weaning (WW), and yearling weight (YW) data of a Mexican Braunvieh cattle population were analyzed with BLUP, GBLUP, and ssGBLUP methods. These methods are differentiated by the additive genetic relationship matrix included in the model and the animals under evaluation. The predictive ability of the model was evaluated using random partitions of the data in training and testing sets, consistently predicting about 20% of genotyped animals on all occasions. For each partition, the Pearson correlation coefficient between adjusted phenotypes for fixed effects and non-genetic random effects and the estimated breeding values (EBV) were computed. Results: The random contemporary group (CG) effect explained about 50%, 45%, and 35% of the phenotypic variance in BW, WW, and YW, respectively. For the three methods, the CG effect explained the highest proportion of the phenotypic variances (except for YW-GBLUP). The heritability estimate obtained with GBLUP was the lowest for BW, while the highest heritability was obtained with BLUP. For WW, the highest heritability estimate was obtained with BLUP, the estimates obtained with GBLUP and ssGBLUP were similar. For YW, the heritability estimates obtained with GBLUP and BLUP were similar, and the lowest heritability was obtained with ssGBLUP. Pearson correlation coefficients between adjusted phenotypes for non-genetic effects and EBVs were the highest for BLUP, followed by ssBLUP and GBLUP. Conclusion: The successful implementation of genetic evaluations that include genotyped and non-genotyped animals in our study indicate a promising method for use in genetic improvement programs of Braunvieh cattle. Our findings showed that simultaneous evaluation of genotyped and non-genotyped animals improved prediction accuracy for growth traits even with a limited number of genotyped animals.

• The Mathematical Education
• /
• v.56 no.2
• /
• pp.213-234
• /
• 2017

The purpose of this study is to examine the perceptions and needs of the 2015 revised curriculum for elementary school teachers and to draw implications for the application of the 2015 revised mathematics curriculum. For this, the major changes in the 2015 revised mathematics curriculum were examined. Major changes in the 2015 revised mathematics curriculum are as follows: 1) Introduce and emphasize mathematical competencies, 2) Restructure the content system, 3) Reduce mathematics contents to teach, 4) Emphasize the learner's affective domain, 5) Emphasize the use of technology, 6) Improve teaching and learning methods and evaluation methods. Also, a survey was conducted for elementary school teachers to analyze the perceptions and demands of the 2015 Revised Mathematics Curriculum. The contents of the survey are consisted of contents of the teachers' awareness of the main changes of the 2015 Revised Curriculum and their demands to implement the 2015 Revised Curriculum in schools. Finally, conclusions and suggestions were drawn based on the survey results. The conclusions and suggestions are as follows: 1) there is a lack of teachers' awareness of the 2015 Revised Curriculum, 2) Support for mathematics curriculum competencies is needed, 3) A variety of teaching and learning materials are needed for emphasizing the learner's affective domain, using the technology, and improving teaching and learning methods and evaluation methods.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.7
• /
• pp.242-249
• /
• 1999

Spot welding is very important and useful technology in fabrication of an automobile body structure. Because fatigue strength of the spot welding point is however considerably lower than parent metal due to stress concentration at the nugget edge, accurate stress analysis and fatigue stength evaluation of spot welded lap joint are very important to valuate the reliability and durability of automobile body structure and to establish a criterion of long life fatigue design. Many invetigators have studied so far onsystematic fatigue strength evaluation with various methods. It is however necessary to verify their reliability and abailability for practical application to fatigue design of spot welded structure, Thus,in this study, fatigue strength evaluation methods of spot welded lap joint. which are the maximum principal stress method. the fracture and availability with the Weibull probability distribution. From the results, it was found that reliability and availability withe the Weibull probaility distribution. From the results, it was found that reliability and availability of the suggest fatigue strength estimation methods methods were higher than $\Delta$P-$N_f$ relation. However, among them , reliability of the maximum pricipal stress method was the highest.

• Geomechanics and Engineering
• /
• v.13 no.2
• /
• pp.237-254
• /
• 2017

Estimation of slope stability is a very important task in geotechnical engineering. However, its estimation using conventional and soft computing methods has several drawbacks. Use of conventional limit equilibrium methods for the evaluation of slope stability is very tedious and time consuming, while the use of soft computing approaches like Artificial Neural Networks and Fuzzy Logic are black box approaches. Multiple Regression (MR) analysis provides an alternative to conventional and soft computing methods, for the evaluation of slope stability. MR models provide a simplified equation, which can be used to calculate critical factor of safety of slopes without adopting any iterative procedure, thereby reducing the time and complexity involved in the evaluation of slope stability. In the present study, a multiple regression model has been developed and tested its accuracy in the estimation of slope stability using real field data. Here, two separate multiple regression models have been developed for dry and wet slopes. Further, the accuracy of these developed models have been compared and validated with respect to conventional limit equilibrium methods in terms of Mean Square Error (MSE) & Coefficient of determination ($R^2$). As the developed MR models here are not based on any region specific data and covers wide range of parametric variations, they can be directly applied to any real slopes.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.5
• /
• pp.589-595
• /
• 2011

Objective: This study compares two visual occlusion methods for the evaluation of in-vehicle interfaces. Background: Visual occlusion is a visual demand measuring technique which uses periodic vision/occlusion cycle to simulate a driving(or mobile) environment. It has been widely used for the evaluation of in-vehicle interfaces. There are two major implementation methods for this technique: (1) occlusion using PLATO(portable liquid crystal apparatus for tachistoscopic occlusion) goggles; (2) occlusion using a software application on a touchscreen device. Method: An experiment was conducted to examine the visual demand of an in-vehicle interface prototype using the goggle-based and the touchscreen-based occlusion methods. Address input and radio tuning tasks were evaluated in the experiment. Results: The results showed that, for the radio tuning task, there were no significant differences in total shutter open time and resumability ratio between the two occlusionconditions. However, it took longer for the participants to input addresses with the touchscreen-based occlusion. Conclusion & Application: The results suggest that touchscreen-based method could be used as an alternative to traditional, gogglebased visual occlusion especially in less demanding visual tasks such as radio tuning.

• Journal of the East Asian Society of Dietary Life
• /
• v.13 no.4
• /
• pp.326-333
• /
• 2003

The purpose of this study was to investigate the effect of various cooking methods(roasted, salad, deep-fried seasoned-roasted and commercial laver) on mineral contents, color and sensory evaluation of laver. The contents of mineral of dried laver by various cooking methods were analyzed using the Inductively Coupled Plasma(ICP) system. The results were summarized as follows : The content of crude protein, moisture, ash and crude fat in dried laver were 35.1％, 10.6％, 9.7％ and 0.8％, respectively. Among the minerals of dried laver, the content of poassium was the highest (2268.0mg/100g d.w.) and those of calcium and iron were comparatively high (495.1mg/100g, 13.5mg/100g). Ca/P ratio of dried laver was about 1:1 levels. Among various laver dishes, the total mineral content was the highest in the roasted laver, but low in the deep-fried laver. Among color values by cooking methods, "L(lightness)" and " - a(greenness)" values were the highest in the roasted laver, and "b(yellowness)" was the highest in the deep-fried laver. The seasoned-roasted laver was highly scored by the sensory evaluation.

• Korean Journal of Remote Sensing
• /
• v.26 no.3
• /
• pp.305-316
• /
• 2010

The MODerate Resolution Imaging Spectroradiometer (MODIS) sensor has 36 bands at 250m, 500m, 1km spatial resolution. However, 500m or 1km MODIS data exhibits a few limitations when low resolution data is applied at small areas that possess complex land cover types. In this study, we produce seven 250m spectral bands by fusing two MODIS 250m bands into five 500m bands. In order to recommend the best fusion method by which one acquires MODIS data, we compare seven fusion methods including the Brovey transform, principle components algorithm (PCA) fusion method, the Gram-Schmidt fusion method, the least mean and variance matching method, the least square fusion method, the discrete wavelet fusion method, and the wavelet-PCA fusion method. Results of the above fusion methods are compared using various evaluation indicators such as correlation, relative difference of mean, relative variation, deviation index, peak signal-to-noise ratio index and universal image quality index, as well as visual interpretation method. Among various fusion methods, the local mean and variance matching method provides the best fusion result for the visual interpretation and the evaluation indicators. The fusion algorithm of 250m MODIS data may be used to effectively improve the accuracy of various MODIS land products.

• Journal of Korean Academy of Nursing Administration
• /
• v.13 no.1
• /
• pp.40-52
• /
• 2007

Purpose: The purpose of this paper was to investigate opinions and experiences of hospital CEOs' and QI managers toward the National Hospital Evaluation Program which was implemented in 2004 and to recommend various strategies to improve the program. Methods: We conducted a mail survey with CEOs and QI　managers' of 78 hospitals with 500 beds or more that participated the 2004 National Hospital Evaluation Program. Results: About 70.8% of the participating CEOs and 64.0% of the QI　managers felt that the objectives of the evaluation program weren't fully achieved. Most respondents said that the current program required a partial or an overall change. Evaluation Criteria was the most often cited area for a change. Many respondents pointed out the importance of including clinical quality indicators in the evaluation tool. Conclusions: To upgrade hospital services with better quality, it is most important to first reach consensus on objectives and approaches of the evaluation program among various players. For a consistent planning and implementation, it is urgent to set up a more systematic organization and financing mechanism. Also, evaluation approaches, including evaluation criteria, methods, patient satisfaction assessment, as well as ways to summarize and publicize each hospital's performance should be improved.

• Journal of Science and Technology Studies
• /
• v.15 no.2
• /
• pp.163-189
• /
• 2015

While Science tries to be far from Society, it actually does yearn for the trust from Society, on the other side. Its efforts getting back the trust has been witnessed with its fast evolution, consistent distrust from Society and Scientists' accountability with investment of public fund. Furthermore, many scholars have argued that there is the need to integrate science and society. In this regards, this paper explores how to integrate both spheres by participatory evaluation. To identify how the participatory evaluation works and should be, three main issues are mentioned. One is about evaluation methods; Objective-oriented and Behaviour aspects. Second is about prerequisite factors; sharing scientific language and changed recognition between civil society and scientists. Third is about challenge to be tackled; epistemological gap among evaluators and complex index. Under these issues, this paper sets out that the participatory evaluation should adopt the appropriate evaluation methodology. Last but not least, self-recognition and motivation by evaluators themselves are important factors, along with societal system which can take participatory evaluation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.6
• /
• pp.703-711
• /
• 2016

The purposes of this study is to identify the problems arising from current Test & Evaluation process of the naval ship acquisition program and to suggest methods to increase the acquisition efficiency. Considering that the present rule of developmental test &evaluation(DT&E) and operational test & evaluation(OT&E) has caused an inefficiency effect on the acquisition procedures due to the limited practices on it, the DT&E and OT&E procedures through test & evaluation master plan(TEMP) is proposed based on the selective practices of the defense instruction articles. Also, considering characteristics of naval ship acquisitions, efficient procedure systems are derived through case analysis results by comparing each performances of the system. The suggested methods are able to meet the requirements of the changed acquisition environments and also increase efficiency of acquisition systems by adoption of DT&E and OT&E combined test scheme.