• Korean Journal of Veterinary Service
• /
• v.45 no.1
• /
• pp.19-30
• /
• 2022

In this study, a simple loop-mediated isothermal amplification (LAMP) combined with visual detection method (vLAMP) assay was developed for the rapid and specific detection of African swine fever virus (ASFV), overcoming the shortcomings of previously described LAMP assays that require additional detection steps or pose a cross-contamination risk. The assay results can be directly detected by the naked eye using hydroxynaphthol blue after incubation for 40 min at 62℃. The assay specifically amplified ASFV DNA and no other viral nucleic acids. The limit of detection of the assay was <50 DNA copies/reaction, which was ten times more sensitive than conventional polymerase chain reaction (cPCR) and comparable to real-time PCR (qPCR). For clinical evaluation, the ASFV detection rate of vLAMP was higher than cPCR and comparable to OIE-recommended qPCR, showing 100% concordance, with a κ value (95% confidence interval) of 1 (1.00~1.00). Considering the advantages of high sensitivity and specificity, no possibility for cross-contamination, and being able to be used as low-cost equipment, the developed vLAMP assay will be a valuable tool for detecting ASFV from clinical samples, even in resource-limited laboratories.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.6
• /
• pp.153-164
• /
• 2019

The presence of thermal bridges in a building envelope cause additional heat loss which increases the heating energy. Given that a higher building insulation performance is required in these cases, the heat loss via thermal bridges is a high proportion of the total heat energy consumption of a building. For the dry exterior insulation system that uses mullions and transoms to fix insulation and exterior materials such as stone and metal sheet, the occurrence of thermal bridges at mullions and transoms is one of the main reasons for heat loss. In this study, a dry exterior insulation system using the truss insulation frame (TIF) was proposed as an alternative to metal mullions. To evaluate the building envelope performance, structural, air-leakage, water-leakage, fire-resistance, thermal, and condensation risk tests were conducted. In addition, the annual energy consumption associated with heating and cooling was calculated, including the linear thermal transmittance of the thermal bridges. As a result, the dry exterior insulation system using TIF achieved the allowable value for all tests. It was also determined that the annual heating load of a building was reduced by 36.7 % when the TIF dry exterior insulation system was used, relative to the dry exterior insulation system using steel pipes without additional insulations.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.6
• /
• pp.3-15
• /
• 2014

Ever expanding overseas construction is one of the most important issues for Korean construction companies. Among these issues, strategies for overseas plant construction have widely been discussed, because the plant construction has features of low competitiveness and high ripple effects when compared with other construction sectors. In this sense, the purpose of this research is to evaluate the CM capability of Korean construction industry for overseas plant construction. Fourteen construction business functions and four techniques were defined first. Based on these functions and techniques, CM capability was quantified for As-Is (2013), To-Be (2018) and Gap analyses. Findings of this research reveal that 1) capability for construction is quite competent, 2) capabilities for planning, design management, contracting, and risk management are found to be relatively low, where higher value can be added. In addition, it is found that R&D needs to be extended to develop systemized management techniques. It is also required to secure specialists and original technologies at national industrial level.

• Journal of Intelligence and Information Systems
• /
• v.14 no.3
• /
• pp.109-131
• /
• 2008

Ubiquitous Smart Space(USS) like u-City has been expected to create a high added value. However, developing USS has a high risk because it should use future technologies and development methodologies that have been never tried in the past. Hence, it has to be considered thoroughly in the very first stage of development. Moreover, USS usually uses several ubiquitous computing technologies combinationally because of the nature of USS. Despite of this, existing technology selection methodologies or technology evaluation methodologies only focus on a single technology. This leads us to develop a methodology of optimal technology combination for developing a specific USS. The purpose of this paper is to propose the methodology and to apply it to develop a real USS. We use portfolio theory and constraint satisfaction problem to determine an optimal technology combination. We also apply our methodology to the national ubiquitous computing project which carries out at present to validate it.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.7
• /
• pp.890-895
• /
• 2021

Recently, the "Act of Serious Disasters, etc" was enacted and institutional and social interest in safety accidents is increasing. In this paper, we analyze statistical data published by government agency on safety accidents that occur in manufacturing sites, and compare various object detection models based on deep learning to build a model to determine dangerous situations to reduce the occurrence of safety accidents. The data-set was directly constructed by collecting images from CCTVs at the manufacturing site, and the YOLO-v4, SSD, CenterNet models were used as training data and evaluation data for learning. As a result, the YOLO-v4 model obtained a value of 81% of mAP. It is meaningful to select a class in an industrial field and directly build a dataset to learn a model, and it is thought that it can be used as an initial research data for a system that determines a risk situation and infers it.

• Journal of Chest Surgery
• /
• v.16 no.4
• /
• pp.602-614
• /
• 1983

Six hundred fourteen consecutive cases of bioprosthetic cardiac valve replacement performed during the period from March 1976 through December 1982 were reviewed. A total of 748 tissue valves [534 Ionescu-Shiley valves, 144 Hancock valves, 46 Angell-Shiley, and 24 Carpentier-Edwards] were implanted in 610 patients. Of these, 477 had single valve replacements [403 mitral, 60 aortic, and 14 tricuspid] including three REDO MVR and one REDO AVR. The remaining 129 had double valve replacements [95 AVR and MVR and 34 MVR and TVR] and 8 had triple valve replacement.592 cases were evaluated. Overall early mortality rate [within 30 days of operation] was 7.1% [6.2% in single valve replacement, 10.2% in double valve replacement, and 16.7% in triple valve replacement]. Leading causes of mortality were low cardiac output or myocardial failure and ventricular arrhythmias. The follow-up period was from one month to 7 years with a cumulative follow-up of 906.6 patient-years [mean 1.53 years]. The late mortality was 1.6%, 3.9%, 0%, 2.6%, 6.6% and 2.0% per patient-year for MVR, AVR, TVR or triple valve replacement, AVR+MVR, MVR+TVR and total, respectively. Actuarial analysis of late results including early mortalities indicates an expected survival rate of 87.6+1.8% at 3 years and 85.92.4% at 7 years for all cases. We also analyzed actuarial survival rate between groups of each valve replacement [AVR, TVR, Double valve, and Triple valve] and the tissue valve groups in MVR. We experienced 7 cases [0.77% per patient-year] of confirmed endocarditis, two of which were fatal. Valve failure-free rates calculated according to the confirmed cases were 97.5% at 4 years, 87.5% at 7 years, and 88.3% at 6 years for Ionescu-Shiley, Hancock and Angell-Shiley valves, respectively. The occurrence rate of thromboembolism was 2.0% per patient-year in total cases, although almost all the patients were given anticoagulant therapy for one year. The occurring rate in MVR was 1.5% and 2.7% per patient-year for Ionescu-Shiley and Hancock valve groups, respectively. The difference in actuarial rate free from thromboemboli between Ionescu-Shiley and Hancock groups was statistically significant [P value less than 0.001]. Thromboembolic events beyond the period of anticoagulation therapy mainly occurred in patients with atrial fibrillation. The actuarial thromboemboli free survival was 95.71.4% at 3 years and 80.17.3% at 7 years. The incidence of hemorrhagic complications was 1.2% per patient-year [fatality 0.55% per patient-year] for anticoagulated patients. Although our clinical data favorably compares with results from other reports, our results suggest that anticoagulant therapy be given on a short-term basis or not at all to hemodynamically stable patients. Long-term therapy with antiplatelet drugs is probably inevitable with patients who have thromboembolic risk factors [such as atrial fibrillation].

• Korean Journal of Clinical Pharmacy
• /
• v.22 no.4
• /
• pp.330-339
• /
• 2012

Background : Hypertension is treated with both lifestyle modification and pharmacotherapy. The Seventh Report of the Joint National Committee on Detection, Evaluation, and Treatment of High Blood Pressure (JNC-7), published in 2003, provides a streamlined management approach to hypertension for the primary care physician. The JNC-7 is the gold standard also in Korea. According to the JNC-7, special therapeutic considerations are recommended for high-risk individuals with compelling indications. The presence of compelling indications in any given patient should be considered when selecting specific pharmacotherapy to treat hypertension. However, in patients with compelling indications, it is unknown that hepatotoxicity is caused by Calcium Channel Blocker (CCB), one of 1st anti-hypertensive drugs. Now, the CCB is the most used 1st anti-hypertensive drug in Korea Therefore, we evaluated the changes in blood liver function parameters (ALT, AST, Total bilirubin, serum albumin) for the study group. Methods : We randomly collected and retrospectively analyzed Electronic Medical Record data (n=28,788) of patients, and who took calcium channel blockers(non-dihydropyridines; diltiazem, verapamil, dihydropyridines; amlodipine, barnidipine, benidipine, clinidipine, efonidipine, felodipine, isradipine, lacidipine, lercanidipine, nicardipine, nifedipine, nimodipine), with having liver function tests (LFTs) from July 1st 2009 to June 30th 2010 at the Seoul National University Hospital in Korea. Control groups are two antihypertensive agents: RAS blockade (ARB; candesartan, irbesartan, losartan, olmesartan, telmisartan, valsartan, ACE-I; cilazapril, enalapril, fosinopril, imidapril, perindopril, ramipril) and, Diuretics (loop; furosemide, torsemide, thiazide; hydrochlorothiazide[HCTZ], indapamide). Patients not having LFT results at these three standard points of time(baseline, during, medication, and after finishing medication) were excluded. The collected data were analyzed by using the SPSS (Version12.0) and Microsoft Excel (Version2007). Results : 711 patients who were treated CCB (297), RAS blockade (232) or Diuretics (182) monotherapy were selected for the study. In selected patients, liver damage degree(changes of each LFTs value) was higher in diuretics group than other groups, followed by RAS blockade and CCB. In diuretics group's was loop-diuretics group was higher than thiazide-diuretics group. In CCB group, Nondihydropyridine-CCB's damage degree was higher than Dihydropyrine-CCB's that. Conclusions : Despite the limitations due to the retrospective study, among patients with abnormal LFTs, the use of CCBs led to a less liver damage than other 1st anti-hypertensive agents. It can be recommended CCBs as one of the initial treatments of hypertension in patients with liver disease.

• Journal of the Korean Society of Radiology
• /
• v.13 no.1
• /
• pp.1-8
• /
• 2019

The purpose of this study is to evaluate usefulness of aid table in ERCP operation. Fifteen patients (mean age: $76.0{\pm}11.4$) and Six Staffs are took part in the questionnaire survey. We evaluated usefulness of aid table as follows: comfortableness, psychological stability, satisfaction from extreme satisfaction as 1 point to extreme satisfaction as 5 point by questionnaire. In the results of comfortableness, the patients reported uncomfortable as $1.7{\pm}0.5$ point at ERCP operation without aid table but they are reported comfortable at using aid table as $4.4{\pm}0.5$ point (p-value${\leq}0.000$). In the psychological stability, the patients have satisfaction ($4.8{\pm}0.4$ point) for aid table. In the addition, the patients felt satisfaction ($4.9{\pm}0.3$ point) for aid table. These results are considered that to use of aid table will give a useful to ERCP operation.

• Journal of radiological science and technology
• /
• v.32 no.2
• /
• pp.161-168
• /
• 2009

The carotid intima-media thickness (IMT) is an early structural marker of the atherosclerotic process and is the only non-invasive test that is currently recommended by the American Heart Association for evaluation of the risk. However, use of this parameter has a limitation because it assumes uniform thickness throughout the blood vessel, whereas atherosclerosis is a focal phenomenon that is confined to intima. In fact, plaque can be found along the atherosclerotic blood vessels even though its value is unknown. The aim of this study is to analyze the carotid plaque and IMT in the stroke patients. We investigated the patients with ischemic stroke, who were admitted to the department of neurology at the Stroke Special Hospital from January to March 2008. After the carotid IMT and plaque were assessed by B-mode ultrasonography, IMT and carotid plaque to risk variables (age, sex) were analyzed. The distribution of CCA IMT was significantly different in terms of age (p = 0.004). Likewise, the distribution of carotid plaque was also significantly different in terms of age (p = 0.006). Carotid plaque was 69 and 92% in normal and abnormal CCA IMTs respectively. The results showed that the CCA IMT was closely associated with carotid plaque.

• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.1
• /
• pp.19-26
• /
• 2017

Purpose: The application of density override is very important to minimize dose calculation errors by fiducial markers of metal material in proton treatment plan. However, density override with actual material of the fiducial marker could make problem such as inaccurate target contouring and compensator fabrication. Therefore, we perform density override with surrounding material instead of actual material and we intend to evaluate the usefulness of density override with surrounding material of the fiducial marker by analyzing the dose distribution according to the position, material of the fiducial marker and number of beams. Materials and Method: We supposed that the fiducial marker of gold, steel, titanium is located in 1.5, 2.5, 4.0, 6.0 cm from the proton beam's end of range using water phantom. Treatment plans were created by applying density override with the surrounding material and actual material of the fiducial marker. Also, a liver cancer patient who received proton therapy was selected. We located the fiducial marker of gold, steel, titanium in 0, 1.5, 3.5 cm from the proton beam's end of range and the treatment plans were created by same method with water phantom. Homogeneity Index(HI), Conformity Index(CI) and maximum dose of Organ At Risk(OAR) in Planning Target Volume(PTV) as the evaluation index were compared according to the material, position of the fiducial marker and number of beam. Results: The HI value was more decreased when density override with surrounding material of the fiducial marker was performed comparing with density override with actual material. Especially the HI value was increased when the fiducial marker was located farther from the proton beam's end of the range for a single beam and the fiducial marker's position was closer to isocenter for two or more beams. The CI value was close to 1 and OAR maximum dose was greatly reduced when density override with surrounding material of the fiducial marker was performed comparing with density override with actual material. Conclusion: Density override with surrounding material can be expected to achieve more precise proton therapy than density override with actual material of the fiducial marker and could increase the dose uniformity and target coverage and reduce the dose to surrounding normal tissues for the small fiducial markers used in clinical practice. Most of all, it is desirable to plan the treatment by avoiding the fiducial marker of metal material as much as possible. However, if the fiducial marker have on the beam path, density override of the surrounding material can be expected to achieve more precise proton therapy.