• Journal of Korean Society of Transportation
• /
• v.17 no.2
• /
• pp.55-68
• /
• 1999

Many ITS services require map databases in digital form to meet desired needs. Due to the dynamic nature of ITS and the sheer diversity of applications, the design and development of spatial databases to meet those needs pose a major challenge to both the public and private sectors. This challenge is further complicated by the necessity to transfer locationally referenced information between different kinds of databases and spatial data handling systems so that ITS products will work seamlessly across the region and nation. The Purpose of this paper is to develop the framework-models commonly to reference locations in the various applications and systems-the ITS Map Datum and LRS(Location Referencing System). The ITS Map Datum consists of the around control points which are the prime intersections (nodes) of the nationwide road network In this study, the major points have been determined along wish link-node modeling procedure. LRS, defined as a system for determining the position (location) of an entity relative to other entities or to some external frame of reference, has also been set up using CSOM type method. The method has been implemented using ArcView GIS software over the Kangnam and Seocho districts in the city of Seoul, showing that the implemented LRS scheme can be used successfully elsewhere. With the proper advent of the K.ITS architecture and services, the procedure can be used to improve the data sharing and to inter operate among systems, enhancing the efficiency both in terms of money and time.

• Journal of the Korea Concrete Institute
• /
• v.26 no.4
• /
• pp.545-553
• /
• 2014

This study suggested an integrated classification method for generalized characteristics of PC beam-column connection according to connection details. Quantifying the failure mode of PC-beam column connection and characteristics of corresponding details, this study suggested to use deformation contribution of each element of beam-column assemblage. According to the expected failure mode of beam-column connection assemblage, PC beam-column connection can be classified into 'equivalent monolithic system' and 'jointed system'. In this study, four test specimens were tested for verification of detailed classification method of PC beam-column connections. Test was carried out with typical beam-column connection test method. Load was applied at the top of test specimen and end of beams were restrained by hinge. In order to verify the deformation contribution of each test specimen, 34-LVDTs were mounted on test specimen. According to test results, deformation contribution of each test specimen have different characteristics. Deformation characteristics of joint and other components which are quantified by test results, equivalent monolithic system can be classified into two categories. Strong connection have extremely small deformation contribution of joint and much larger deformation contribution was shown in flexural behavior of beam. The other type of beam-column connection is ductile connection which allows the larger deformation in joint area compared with strong connection.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.3
• /
• pp.464-469
• /
• 2002

In this research, nonvisibility and robustness of image watermarking mixed Key and Logo method were evaluated. The role of the Key was performed by a personal ID of a copyrighter and the logo images were used as the watermark. The standard image of Lena was used for experimental image and binary images of `Park'with size 32${\times}$32 and 64${\times}$64 were used for the watermark, respectively In order to evaluate nonvisibility of the proposed watermarking scheme, PSNR(Peak Signal to Noise Ratio) of the watermarked image was obtained and for robustness reconstructive rates of the reconstructed watermark were obtained from the watermarked image with image transformation of JPEG lossy compression. The experimental results show that nonvisibility is excellent as PSNR of the watermarked image is 93.75dB and the reconstructive rates of the case of 322${\times}$32 watermark was better than the case of the 64${\times}$64 watermark; average 5.9%, 13.9%, 6.5%, and 4.2% in the case of scale-down rates, rotational rates, impulse noise power density, and JPEG lossy compression rates, respectively.

• The KIPS Transactions:PartB
• /
• v.9B no.6
• /
• pp.835-844
• /
• 2002

The number of channels available to a video server is limited since the number of channels a video server can support is determined by its communication bandwidth. Several approaches such as batching, piggybacking and patching have been proposed to reduce I/O demand on the video server by sharing multicast data. Patching has been shown to be efficient in the matter of the cost for VOD systems. Unlike conventional multicast techniques, patching is a dynamic multicast scheme which enables a new request to join an ongoing multicast. In addition, true VOD can be achieved since a new request can be served immediately without having to wait for the next multicast. In this paper. we propose two types of channel reservation patching algorithm : a fixed channel reservation patching and a variable channel reservation patching. To immediately schedule the requests for popular videos, these algorithms reserve the channels of video server for the fixed number of popular videos or for the variable number of popular videos which is determined dynamically according to the load of video server. The performance of the proposed algorithms is evaluated through simulations, and compared with that of simple patching. Our performance measures are average defection rate, average latency, service fairness and the amount of buffered data according to video server loads. Simulation results show that the proposed channel reservation patching algorithms provide better performance compared to simple patching algorithm.

• Journal of KIISE:Databases
• /
• v.33 no.3
• /
• pp.271-281
• /
• 2006

Recently the need for Location-Based Service (LBS) has increased due to the development and widespread use of the mobile devices (e.g., PDAs, cellular phones, labtop computers, GPS, and RFID etc). The core technology of LBS is a moving-objects database that stores and manages the positions of moving objects. To search for information quickly, the database needs to contain an index that supports both real-time position tracking and management of large numbers of updates. As a result, the index requires a structure operating in the main memory for real-time processing and requires a technique to migrate part of the index from the main memory to disk storage (or from disk storage to the main memory) to manage large volumes of data. To satisfy these requirements, this paper suggests a unified index scheme unifying the main memory and the disk as well as migration policies for migrating part of the index from the memory to the disk during a restriction in memory space. Migration policy determines a group of nodes, called the migration subtree, and migrates the group as a unit to reduce disk I/O. This method takes advantage of bulk operations and dynamic clustering. The unified index is created by applying various migration policies. This paper measures and compares the performance of the migration policies using experimental evaluation.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.11
• /
• pp.1318-1332
• /
• 1999

본 논문에서는 입출력 응용을 위해 collective I/O 기법을 기반으로 한 실행시간 시스템의 설계, 구현 그리고 그 성능평가를 기술한다. 여기서는 모든 프로세서가 동시에 I/O 요구에 따라 스케쥴링하며 I/O를 수행하는 collective I/O 방안과 프로세서들이 여러 그룹으로 묶이어, 다음 그룹이 데이터를 재배열하는 통신을 수행하는 동안 오직 한 그룹만이 동시에 I/O를 수행하는 pipelined collective I/O 등의 두 가지 설계방안을 살펴본다. Pipelined collective I/O의 전체 과정은 I/O 노드 충돌을 동적으로 줄이기 위해 파이프라인된다. 이상의 설계 부분에서는 동적으로 충돌 관리를 위한 지원을 제공한다. 본 논문에서는 다른 노드의 메모리 영역에 이미 존재하는 데이터를 재 사용하여 I/O 비용을 줄이기 위해 collective I/O 방안에서의 소프트웨어 캐슁 방안과 두 가지 모형에서의 chunking과 온라인 압축방안을 기술한다. 그리고 이상에서 기술한 방안들이 입출력을 위해 높은 성능을 보임을 기술하는데, 이 성능결과는 Intel Paragon과 ASCI/Red teraflops 기계 상에서 실험한 것이다. 그 결과 응용 레벨에서의 bandwidth는 peak point가 55%까지 측정되었다.Abstract In this paper we present the design, implementation and evaluation of a runtime system based on collective I/O techniques for irregular applications. We present two designs, namely, "Collective I/O" and "Pipelined Collective I/O". In the first scheme, all processors participate in the I/O simultaneously, making scheduling of I/O requests simpler but creating a possibility of contention at the I/O nodes. In the second approach, processors are grouped into several groups, so that only one group performs I/O simultaneously, while the next group performs communication to rearrange data, and this entire process is pipelined to reduce I/O node contention dynamically. In other words, the design provides support for dynamic contention management. Then we present a software caching method using collective I/O to reduce I/O cost by reusing data already present in the memory of other nodes. Finally, chunking and on-line compression mechanisms are included in both models. We demonstrate that we can obtain significantly high-performance for I/O above what has been possible so far. The performance results are presented on an Intel Paragon and on the ASCI/Red teraflops machine. Application level I/O bandwidth up to 55% of the peak is observed.he peak is observed.

• Atmosphere
• /
• v.28 no.1
• /
• pp.99-112
• /
• 2018

In this study, the accuracy of ocean analysis data, which are produced from the Korea Meteorological Administration (KMA) Nucleus for European Modelling of the Ocean/Variational Data Assimilation (NEMO/NEMOVAR, hereafter NEMO) system and the HYbrid Coordinate Ocean Model/Navy Coupled Ocean Data Assimilation (HYCOM/NCODA, hereafter HYCOM) system, was evaluated using various oceanic observation data from March 2015 to February 2016. The evaluation was made for oceanic thermal environments in the tropical Pacific, the western North Pacific, and the Korean peninsula. NEMO generally outperformed HYCOM in the three regions. Particularly, in the tropical Pacific, the RMSEs (Root Mean Square Errors) of NEMO for both the sea surface temperature and vertical water temperature profile were about 50% smaller than those of HYCOM. In the western North Pacific, in which the observational data were not used for data assimilation, the RMSE of NEMO profiles up to 1000 m ($0.49^{\circ}C$) was much lower than that of HYCOM ($0.73^{\circ}C$). Around the Korean peninsula, the difference in RMSE between the two models was small (NEMO, $0.61^{\circ}C$; HYCOM, $0.72^{\circ}C$), in which their errors show relatively big in the winter and small in the summer. The differences reported here in the accuracy between NEMO and HYCOM for the thermal environments may be attributed to horizontal and vertical resolutions of the models, vertical coordinate and mixing scheme, data quality control system, data used for data assimilation, and atmosphere forcing. The present results can be used as a basic data to evaluate the accuracy of NEMO, before it becomes the operational model of the KMA providing real-time ocean analysis and prediction data.

• Ocean and Polar Research
• /
• v.33 no.4
• /
• pp.473-483
• /
• 2011

In the recent WTO/DDA negotiations, discussions are progressing to forbid fishery subsidies which have negative effect on the natural environment and the fishery resources and to lower or to eliminate the tariff/non-tariff barriers that distort trade liberalization. As a result, linking to the weak structural environment of Korea's fishing villages; such a scheme has jeopardized the livelihood of fishermen who settle down in local fishing harbors. Against this backdrop, the government is attempting to positively respond to changes in the fishing environment in a number of different ways: promotion of fishing tourism, fishing harbor reinforcement in function, developing fishing villages, and harbors. With respect to investment by priority in fishing harbor development, it is very important to appropriately select investment targets based on objective criteria. A small number of harbors are chosen and investment plans by harbor are systematically devised, economic feasibility and the effects of investment are analyzed and reviewed in relation to each target harbor. This paper is designed to review and assess objective evaluation methods and the degree of importance for the designation of target harbors, dealing with local harbors in Chung Nam Do as a model. Each local government has tried to reorganize existing harbors and develop new harbors, considering a fall in the number of fishing vessels and the expansion of maritime leisure activities. In order to overcome the limit of existing harbors in function, to raise the income of fishermen, and to activate tourism, they have shifted their focus from simple functions such as vessel evacuation and anchoring to harbor beautification, which can work as a basis for fishing tourism. This paper points out that the AHP analysis method for prioritizing local harbors in Chung Nam Do should help to be chosen target harbors in other cities and provinces. Each local government has attempted to reorganize existing harbors and to develop new harbors, taking into consideration the decline in the number of fishing vessels and the expansion of maritime leisure activities. In order to overcome the limited number of functional harbors, to raise the income of fishermen, and to boost tourism, they have shifted their focus from simple functions, such as vessel evacuation and anchoring, to harbor beautification, which can work as a basis for fishing tourism. This paper shows that the AHP analysis method for prioritizing local harbors in Chungcheongnam-do could aid in the effective selection of target harbors in other cities and provinces.

• Journal of Environmental Impact Assessment
• /
• v.25 no.6
• /
• pp.402-413
• /
• 2016

Marine oil spill accidents are occurring continuously due to the marine transportation of the oil. While building a preventive system for oil spill is uttermost necessary, we also need to have a systematic response system to handle the oil spills that inevitably occur. So far, studies have focused on the environmentally sensitive resources affected by oil spills. However, there is a need to conduct research to evaluate the damage to the socially and economically sensitive resources that make up the life of local residents. This study represents the process of building an analytical framework for the assessment of socioeconomic resources affected by marine oil spills. While it is important to provide a scheme for identification and indexation of socially and economically sensitive resources that is compatible with Korea's situations, using existing data for identifying socio-economically sensitive resources might also be meaningful. However, to allow accurate analysis for better evaluation, we need to select more applicable data among the various indicators. In this research, we have reviewed many existing case studies of sensitive resources, studies of the variables that have been used for indexing sensitive resources, and various factors considered in SIA (Social Impact Assessment). Based on the findings, we classify socio-economically sensitive resources into marine products acquisition, population, land usage, administrative area, and cultural heritage and tourist region.

• The Journal of the Korea Contents Association
• /
• v.20 no.8
• /
• pp.368-374
• /
• 2020

Journaling file systems (JFS) manage changes of file systems not yet committed in a data structure known as a journal to restore the file system in the event of an unexpected failure. Extra write operations required for journaling negatively affect the performance of JFS. The high-performance and byte-addressable non-volatile memory (NVM) was expected to easily mitigate these performance problems by providing NVM space as journal storage. However, even with such non-volatile memory technologies, performance problems still arise due to scalability problems inherent in processing transactions of JFS. To solve this problem, we proposes a technique for processing file system transactions for scalable performance. To this end, lock-free data structures are used and multiple I/O requests are allowed to simultaneously be processed on high-performance storage devices with multiple I/O channels. We evaluate the file system with the proposed technique by comparing the original ext4 file system and the recent proposed NVM-based journaling file system on a multi-core server, and experimental results show that our file system has better performance (up-to 2.9/2.3 times) than the original ext4 file system and the recent NVM-based journaling file system, respectively.