• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.8
• /
• pp.721-728
• /
• 2017

High-grade gray cast iron (HCI350) was prepared by adding Cr, Mo and Cu to the gray cast iron (GC300). Their microstructure, mechanical properties and fatigue strength were studied. Cast iron was made from round bar and plate-type castings, and was cut and polished to measure the percentage of each microstructure. The size of flake graphite decreased due to additives, while the structure of high density pearlite increased in volume percentage improving the tensile strength and fatigue strength. Based on the fatigue life data obtained from the fatigue test results, the probability - stress - life (P-S-N) curve was calculated using the 2-parameter Weibull distribution to which the maximum likelihood method was applied. The P-S-N curve showed that the fatigue strength of HCI350 was significantly improved and the dispersion of life data was lower than that of GC300. However, the fatigue life according to fatigue stress alleviation increased further. Data for reliability life design was presented by quantitatively showing the allowable stress value for the required life cycle number using the calculated P-S-N curve.

• Food Science of Animal Resources
• /
• v.30 no.2
• /
• pp.206-215
• /
• 2010

A total of 582 gilts and barrows were analyzed to investigate the regressive relationships to slaughter weight (SW) of variables related to production efficiency and pork quality. Average initial weights and SW were 88.6 and 122.5 kg, respectively, for gilts and 88.7 and 121.4 kg, respectively, for barrows. Average daily gain and gain:feed ratio were not affected by SW. Backfat thickness, which was significantly greater (p<0.01) in barrows (23.3 mm) than in gilts (20.7 mm), increased with increasing SW (0.21 mm/kg; p<0.001). When the 4-notch carcass yield and quality grades were quantified according to an arbitrary 1 point-per-1 notch scale, the former, but not the latter, regressed on SW (-0.64/10 kg; p<0.01). The percent yield of the belly per total lean (overall mean=20.7%) increased with increasing SW (0.37%/10 kg; p<0.001), whereas in other cuts, the SW effect was negligible. The redness of the loin also increased with increasing SW (p<0.05), but other physicochemical characteristics were minimally influenced by SW. In sensory evaluation, effects of SW for fresh and cooked loin, ham, and belly were mostly considered insignificant in terms of quality, albeit statistically significant in several cases. However, positive regressions on SW (p<0.01) of the marbling and acceptability scores of fresh loin as well as the fat:lean ratio of fresh belly were noteworthy. Collectively, SW of approximately 125 kg was maximal for both sexes under the current carcass yield grading, in which 94 kg is the upper weight limit for grade A carcass. However, if the carcass weight limit of the grading was to be removed or broadened, the SW for gilts (but not that for barrows because of their excessive fat content at above 125-kg SW) could be increased to 135 kg or greater without compromising carcass quality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.647-654
• /
• 2016

In the defense industry, national security takes priority over economic sense and this has translated into high cost and long-term research and development. However, the exponential growth of technology and rapid changes in the security situation in recent years have resulted in a call for the development of systems at a low cost within a short period of time. In order to implement a modularization strategy in the field of defense, the introduction of line replaceable units in OO systems needs to be prioritized. This study selects six criteria following a literature review and prioritizes 11 modules for OO systems using the project evaluation method, Grey Relational Analysis (GRA). Based on the GRA results, the grey relational grades were derived as 0.83, 0.81 and 0.80 for the M11 (Main board), M8 (EMI module), M3 (Single board computer) modules, respectively. The cost and time of development is expected to be reduced in accordance with the grey relational grade. The results of this research could be utilized for decision making on adopting modularization in similar system development or product improvement programs (PIPs).

• Journal of Korean Neurosurgical Society
• /
• v.30 no.7
• /
• pp.861-869
• /
• 2001

Objective : In this study, we investigated the relationship between the histologic grading of meningiomas and proliferative potentials determined by the Ki-67, proliferating cell nuclear antigen(PCNA) and flow cytometry (FCM) with the aim of determining whether these potentials can be used as a parameter to the proliferative activity, in particular of atypical and malignant meningiomas. Methods : This study consisted of 47 meningiomas(6 malignant, 14 atypical, and random sampled 27 benign meningiomas). By immunohistochemical staining of Ki-67 and PCNA on formalin-fixed, paraffin-embedded sections, the anti-human rabbit polyclonal antibody against Ki-67 antigen and anti-PCNA monoclonal antibody(PC10) scores were counted. FCM was also performed on paraffin-embedded tissue using a selective staining technique for DNA. DNA ploidy, S-phase fraction, and proliferative index(PI)) were determined. Results : The results are summarized as follows ; 1) Proliferation rates as assessed by Ki-67 and PCNA closely correlated with the degree of anaplastic histologic features. 2) Proliferative potentials determined by FCM(S-phase fraction and PI) were not able to distinguish between benign and atypical/malignant meningiomas. 3) DNA ploidy was not a useful indicator of histologic grade in these tumors. 4) Proliferative potentials such as Ki-67 staining index(SI) and PCNA SI did not correlate with the ploidy pattern. 5) There was a linear correlation between Ki-67 SI and PCNA SI, but we could not find a correlation between Ki-67 SI and S-phase fraction or PI. Our results also did not show a statistically signficant correlation between PCNA SI and S-phse fraction or PI. Conclusions : We conclude that evaluation of the proliferative potentials with Ki-67 and PCNA is important as an additional factor for the prediction of malignancy in meningiomas. A dual study of Ki-67 and PCNA SIs on the same tissue might improve the accuracy with which the proliferative potential of a tumor can be predicted. We demonstrated that FCM in meningiomas is not valuable in predicting the behavior of these neoplasms, but we did observe a trend toward more malignancy with higher percent S-phase fraction and higher PI. Analysis of the S-phase fraction and PI might therefore be a useful tool to discriminate among histologic grades of meningiomas.

• Journal of the Korean Arthroscopy Society
• /
• v.4 no.2
• /
• pp.123-127
• /
• 2000

Purpose : To evaluate of the surgical outcome of primary repair in anterior cruciate ligament rupture. Material & Method : Twenty-five patients underwent arthroscopic primary repair of ACL. We performed pull-out suture of ruptured ligament in 18 cases, and suture and augumentation with gracillis & semitendinosus in 7 cases. At follow up, the International Knee Documentation Committee(IKDC) scale & Lysholm score were used to grade outcome, and also the KT-2000 arthrometer was used to evaluate objective ligament laxity. Results : In analysis of IKDC scale, final evaluation group were group A in 3 cases, group B in 13 cases, group C in 9 cases. The mean value of Lysholm score was 83 points. In KT-2000 arthrometer examination, mean anterior translation was 3.9mm at 201b, 7.3mm at 30lb. The mean difference value between injured knee and uninjured knee was 1.1mm at 201b, 2.29mm at 301b. There was statistical significance in mean difference value between injured and uninjured knee. Conclusion : By analysis of clinical & objective data, we could confirm that the mid-term result of ACL suture is not satisfactory. So, we recommend that ACL reconstruction would be done in young active patient rather than suture.

• Journal of Life Science
• /
• v.29 no.11
• /
• pp.1267-1272
• /
• 2019

The main cause of cervical cancer is the human papillomavirus (HPV), and HPV DNA has been reported in 99.7% of patients with cervical cancer. The worldwide prevalence is highest for the HPV 16 and 18 genotypes, but HPV 52 and 58 have the highest prevalence in Asian countries, including Korea. The purpose of this study was to obtain basic data for the prevention of cervical cancer by analyzing the prevalence of HPV and the genotypes of high risk-human papillomavirus (HR-HPV) infection in women in Busan, Korea. We analyzed 1,995 cases of HPV in women who visited a Busan obstetrics and gynecology hospital from January 2016 to December 2017. The prevalence of HPV among these women was 28.3% (565/1995), and the HR-HPV infection rate was 75.4% (426/565). The HR-HPV genotype with the highest prevalence was HPV-52 (63/565, 11.2%), followed by HPV-58 (56/565, 9.9%), HPV-53 (55/565, 9.7%), and HPV-16 (53/565, 9.4%). The HR-HPV infection rate of young women 18-39 years old was 60.3% (257/426), so this age group should undergo continuous monitoring. The cytological results revealed a high infection rate for HPV-16 in high grade squamous intraepithelial lesions (HSIL) and squamous cell carcinoma (SCC). However, further evaluation of more samples is needed to confirm the HR-HPV genotypes related to the development of cervical epithelial neoplasias.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.4
• /
• pp.519-532
• /
• 2019

The objectives of this study were to evaluate the effects of shelling ratio and resin content on the properties of bamboo oriented strand board (BOSB) from betung (Dendrocalamus asper) and to determine the correlation between the results of dynamic and static bending tests. Strands were steam-treated at $126^{\circ}C$ for 1 h under 0.14 MPa pressure and followed by washing with 1% NaOH solution. Three-layer BOSB with the core layer perpendicular to the surface was formed with shelling ratios (face:core ratio) of 30:70; 40:60; 50:50; 60:40 and binded with 7% and 8% of phenol formaldehyde (PF) resin with the addition of 1% of wax. The evaluation of physical and mechanical properties of BOSB was conducted in accordance with the JIS A 5908:2003 standard and the results were compared with CSA 0437.0 standard for commercial OSB (Grade O-1). Non-destructive testing was conducted using Metriguard Model 239A Stress Wave Timer which has a wave propagation time from 1 to $9,999{\mu}s$ and a resolution of $1{\mu}s$. BOSB with 8% resin content showed better physical and mechanical properties than those with 7% resin content. The increase of the face layer ratio improved the strength of BOSB in parallel direction to the grain. The results suggested that shelling ratio of 50:50 could be used as a simple way to reduce PF resin requirements from 8% to 7% and to meet the requirements of CSA 0437.0 standard. The results of non-destructive and destructive tests showed a strong correlation, suggesting that non-destructive test can be used to estimate the bending properties of BOSB.

• The Journal of Korean Academy of Sensory Integration
• /
• v.16 no.2
• /
• pp.64-74
• /
• 2018

Objective : The purpose of this study is to examine the effects of therapeutic interventions on upper extremity function of children with cerebral palsy using systematic review methods and to suggest intervention trends in Korea. Methods : The subjects of the study were the researches published in the Korean Journal since 2008. Total 12 studies were selected through Korean research database engine such as DBpia, Scholar, KSDC, KISS and RISS for the systematic review. Key words were 'cerebral palsy', 'upper extremity function' and 'hand function'. The results of this study were analyzed by qualitative level and methodological quality level of evidence, and the results of each study were analyzed according to the PICO approach, that is Patient, Intervention, Comparison and Outcome. Results : For the level of evidence, Grade IV and V were most frequent. In terms of methodological quality, majority of the studies showed 'Fair' level. The subjects were the children with hemiplegia, and Single-subjects designs and case studies were frequent experimental design. Constraint-induced movement therapy (CIMT) was most frequently conducted among the intervention studies, and Jebsen-Taylor Hand Function Test was most frequently used evaluation tool. Eleven studies showed that the upper limb functions were significantly improved or were positively effective. Conclusion : Various intervention methods have been implemented to improve the upper limb functions of children with cerebral palsy. In the future, studies on intervention methods based on the type of paralysis and studies with high quality of evidence should be conducted in Korea.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.2
• /
• pp.129-144
• /
• 2019

This study aimed at developing an accelerated collection method that reduces measurement and collection time by improving and complementing the desiccator method, which is mainly used for quality control in wood-based panels and furniture production sites. First, this study measured the formaldehyde emissions from the wood-based panels by grade using the desiccator method. Further, this study compared the desiccator method with the developed process and analyzed the correlation in optimal temperature, time, and exposed area. The results showed that the developed process resulted in relatively similar outcomes in comparison to the desiccator method when the temperature was $100^{\circ}C$, the time was 1 h, and two specimens were used, at which the correlation was high. To verify the developed process, this study commissioned Korea Conformity Laboratories with the standardized temperature, time, and the number of specimens to compare them with the specimen that was not used in the actual test. As a result, the correlation to the desiccator method was shown to be very high. However, the formaldehyde emission measured by the accelerated collection process was mostly higher than that measured by the desiccator method. The formaldehyde emission grades from several specimens were one level higher. However, from the perspectives of quality control, it was determined that the accelerated collection method developed in this study could be sufficiently used.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.1
• /
• pp.70-85
• /
• 2012

Uiseong Tamni-ri Five-storied Stone Pagoda is composed of andesitic tuff and partially combined with tuff breccia and fine-grained granite. The andesitic tuff is identical to basement rock of Geumseongsan Mountain based on lithological, mineralogical and geochemical characteristics. The pagoda has suffered physical weathering such as crack and scaling, discoloration and biological colonization with complex reaction. Expecially, dark gray and brown discoloration appeared whole over the surface of the pagoda, and three to five-layered exfoliation and granular disintegration dominantly occurred in the fourth and fifth roof stones. It is assuming that the stone elements of the pagoda are evaluated as third to forth grades (average third grade) of weathering compared to fresh rock in Geumseongsan Mountain. The physical strength of the stone elements shows low values in the south and west sides of the pagoda that corresponds high weathering degree of the west side due to exfoliation, crack and granular disintegration. It is necessary to investigate the pagoda for precise deterioration assessment, monitoring and conservation treatment.