• Journal of Information Display
• /
• 제13권2호
• /
• pp.83-89
• /
• 2012

The crosstalk evaluation of multiview autostereoscopic three-dimensional (3D) displays is discussed, with both the human and technical factors investigated via image quality assessment. In the imaging performance measurements and analysis for a multiview autostereoscopic display prototype equipment, it was inferred that crosstalk would have both a positive and a negative effect on the imaging performance of the equipment. The importance of the attached diaphragm in the crosstalk evaluation was proposed and then experimentally verified, using the developed prototype equipment. The luminance distribution and crosstalk situation were given, with two different diaphragm arrays applied. The analysis results showed that the imaging performance of this 3D display system can be improved with minimum changes to the system structure.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.76-81
• /
• 2012

In-process evaluation equipment for the prominent discrete tone (PDT) emitted by small motors or actuators such as HDD(Hard Disk Driver), ODD(Optical Disk Driver) or linear motors has been developed and estimated on the basis of Prominence Ratio (PR) method in ECMA 74. Correlation of the evaluation equipment was performed in comparison with the method by ECMA 74 in anechoic chamber. Coherent function between two systems was applied in order to compensate traceability of ECMA 74 in anechoic chamber. Usability of the developed system with estimated Gage R&R shall be approved with real samples in the mass production line.

• 한국경영과학회지
• /
• 제37권4호
• /
• pp.161-180
• /
• 2012

We develop some evaluation tool and indicators for the scores for medical equipment replacement in hospital. There has been no research for Korean hospitals although there are many for foreign medical institutions. In this paper, among many variables that were obtained from the previous studies, eleven variables are selected as indicators and tied as three groups. And then we obtain scores of medical equipments based on the weighted values of those indicators. We can make decisions whether we replace medical equipments or not by ranking the medical equipments based on the scores. This paper shows that we can make decisions to replace medical equipments very objectively and effectively using the evaluation tool and indicators we develop.

• 한국전기전자재료학회논문지
• /
• 제18권2호
• /
• pp.153-158
• /
• 2005

Recently, as the feasibility study shows that trans-Korea railway and trans-continental railway are advantageous, interest in high-speed railway system is increasing. Because railway vehicle is environment-friendly and safe compared with airplane and ship, its market-sharing increases gradually. KHST(Korean High Speed Train) has been developed by KRRI (Korea Railroad Research Institute) for last 6 years to satisfy the need. An electric railway system is composed of high-tech subsystems, among which main electric equipment such as transformers and converter are critical components determining the performance of rolling stock. We developed a measurement system for on-line test and evaluation of performances of KHST. The measurement system is composed of software part and hardware part. Perfect interface between multi-users is possible. A now method to measure temperature was applied to the measurement system. By using the system, fault diagnosis and performance evaluation of electric equipment in Korean High Speed Train was conducted during test running.

• 한국군사과학기술학회지
• /
• 제15권5호
• /
• pp.615-622
• /
• 2012

Airborne radio communications, navigation, and identification equipments are the basic equipment of airplane. Airborne radio communications, navigation, and identification equipments are characterized by user's many quantitative and qualitative requirements. These equipment look like simple test and evaluation, but they have many complex factors. This paper describe the test and evaluation of airborne radio communications, navigation, and identification equipments.

• 한국주거학회논문집
• /
• 제22권4호
• /
• pp.71-81
• /
• 2011

This study aims to make evaluation method as a means to evaluate the crime prevention through environmental design of multi-family housing. According to the analysis of correctness and usefulness of evaluation method in multi-family housing, the preliminary evaluation method is selected. The correctness and usefulness of evaluation method is examined by 2 works. One is analyzing the results of experts' advice about evaluation method. The other is analyzing the results of the case studies of 3 housing sites. Those improve evaluation method to measure the crime prevention through environmental design objectively. As a result, the system of classification is divided into evaluation area and evaluation item. Evaluation area is sorted into four types, i.e. public space, semi-public space, semi-private space, and equipment. Evaluation scores according to evaluation area are different. Evaluation scores of public space are 73. Those of semipublic space are 196. Those of semi-private space are 75, Those of equipment are 28. Evaluation item is divided into 20 items. 20 items are; the entrance of complex, apartment building, recreational space and parking space etc. Checklists according to evaluation items are proposed and detail evaluation criteria according to checklist are proposed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.660-668
• /
• 2000

The stress of connection points between railway vehicle equipment and carbody is considered as one of the important railway safety factor under the vehicle service condition. If any material or equipment drop in to the rail during the service condition, the vehicle call be lose its control as well as run off the rail. The be]t safety evaluation method by using hand calculation is broadly used by manufacturer is introduced in this paper. Two different kinds of the bolt, such as regular bolt and the bolt aluminum extruded carbody use, are tested based on U.I.C according to equipment fixed. The effect of holder and base to bolt under tile loading condition is analyzed on this paper.

• 한국인터넷방송통신학회논문지
• /
• 제22권3호
• /
• pp.57-62
• /
• 2022

최근 추적 레이더는 다양한 환경에서 표적을 획득하고 추적할 수 있는 새로운 알고리듬을 개발하기 위한 연구를 지속하고 있다. 일반적으로 새로운 운용 알고리듬 개발을 위해 실제 표적 및 환경과 유사한 모델링을 사용하지만, 실제 환경을 모델링하는데 한계가 있다. 본 논문에서는 밀리미터파를 사용하는 추적레이더가 표적을 획득하고 추적하는데 필요한 새로운 운용 알고리듬을 효율적으로 개발하기 위해 RAW 데이터 저장 장비를 개발하였다. RAW 데이터 저장 장비는 밀리미터파를 사용하는 추적레이더의 신호처리장치가 8채널에서 OOOMSPS로 출력하는 RAW 데이터를 실시간으로 저장할 수 있도록 설계하였다. RAW 데이터 저장 장비는 데이터 획득 장비, 데이터 저장 장비로 구성된다. 데이터 획득장비는 고속통신 인터페이스가 가능한 상용 Xilinx KCU 105 Evaluation KIT를 활용하여 구현하였고, 데이터 저장장비는 상용 Xilinx KCU 105 Evaluation KIT 호환이 가능한 컴퓨터를 적용하여 구현하였다. 본 논문에서 구현한 RAW 데이터 저장 장비는 밀리미터파 추적레이더의 신호처리장치와 반복 연동시험을 통해 성능을 검증하였다.

• Physical Therapy Rehabilitation Science
• /
• 제11권4호
• /
• pp.414-420
• /
• 2022

Objective: In this study, the test-retest reliability and validity were presented to evaluate the usability of isokinetic rehabilitation equipment for the knee joint. Design: Cross-sectional design, reliability & validity study. Methods: Thirty healthy adults participated in the study. A CSMI dynamometer was used as a standardized measuring device to present the validity of the equipment. It was measured based on the dominant leg. The average peak torque value was selected as the measurement variable. After the measurement, a questionnaire was conducted on safety, satisfaction, and performance through the usability evaluation questionnaire. Results: The knee joint isokinetic rehabilitation equipment showed high reliability with Intraclass Correlations Coefficients (ICC) =0.883~0.956. In order to check the validity of the equipment, the 95% confidence interval of the mean difference limit was confirmed by the Bland & Altman plot. As a result, all three angular velocities showed a smaller confidence interval in the flexion than in extension. There were less than 10 plots that were not included in 2 Standard Deviation (SD) between all measurements. As a result of the usability evaluation questionnaire, the average of the safety domain(4.9±0.4), satisfaction domain(4.1±0.8), performance domain(4.3±0.8). Conclusions: If the product is improved by supplementing the items identified in the usability evaluation process, it is judged that it can be used as a useful device in various knee joint rehabilitation fields.

• 대한인간공학회지
• /
• 제29권2호
• /
• pp.249-255
• /
• 2010

The visibility evaluation is significant for the development of construction equipment. The visibility evaluation follows the standards of ISO 5006, ISO 14401-1, and ISO 14401-2. The evaluation contains the operator's visibility and the visibility of rear-view mirrors. The operator's visibility includes the visibility test which requires the recognition of the rectangular line surrounding the machine by one meter and the circle with a 12 meter radius. This study describes the two evaluation processes for the development of the wheel loader. The first process is the light bulb shadow test by using a prototype wheel loader. The second process is based on computer simulation in virtual space. The advantages and disadvantages of computer simulation process are investigated.