• Journal of Power System Engineering
• /
• v.9 no.3
• /
• pp.15-20
• /
• 2005

In this paper, the effect of oxygen component in fuel on the exhaust emissions has been investigated for an indirect injection diesel engine. It was tested to estimate change of engine performance and exhaust emission characteristics for the commercial diesel fuel and oxygenated blended fuel which has four kinds of mixed ratio. And, the effects of exhaust gas recirculation(EGR) on the characteristics of NOx emission have been investigated. Ethylene glycol mono-n-butyl ether(EGBE) contains oxygen component 27% in itself, and it is a kind of effective oxygenated fuel of mono-ether group that the smoke emission of EGBE is reduced remarkably compared with commercial diesel fuel, that is, it can supply oxygen component sufficiently at higher loads and speeds in diesel engine. It was found that simultaneous reduction of smoke and NOx was achieved with oxygenated fuel(10vol-%) and cooled EGR method(10%).

• Journal of Climate Change Research
• /
• v.9 no.1
• /
• pp.69-74
• /
• 2018

The purpose of this study is to suggest the methodology of $CO_2$ Emission Factor Verification and Quantitative Assessment in Ethylene Product Processes. At first, this study compare the IPCC (Intergovernmental Panel on Climate Change) 1996 Guideline and 2006 Guideline. And analyse methodology for estimating $CO_2$ emission and $CO_2$ emission factor in Ethylene product process. Also analyse cases of estimating $CO_2$ emission factor based on material balance. Methodology of $CO_2$ Emission Factor Verification and Quantitative Assessment are following the categories proposed by GIR (Greenhouse Gas Inventory and Research Center). There are total 12 factors in 8 categories and give 5 or 10 points according to their importance. Also this study suggests necessary data of document to meet the conditions. The result would help estimate accuracy Greenhouse Gas Inventory. Also contribute to establish policy on environmental assessment, air conservation, etc.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.37-40
• /
• 2007

Diesel autothermal reforming(ATR) is an effective method for hydrogen production. But, diesel ATR has several problems such as the sulfur poisoning of catalyst and carbon deposition during reforming reactor. Especially, carbon deposition is a severe problem, which causes rapid performance degradation, in the reforming reaction. Ethylene among the reformate gas is a carbon precursor. Effective decomposition of ethylene is an important issue. In this paper, we investigated the carbon deposition from ethylene in the reforming reaction for proper reaction condition of diesel ATR. We achieved relatively high performance of diesel ATR under $H_{2}O/C=0.8$, $O_{2}/C=3$ condition that was based on the experiment of ethylene reforming reaction.

• Journal of Food Hygiene and Safety
• /
• v.9 no.1
• /
• pp.43-48
• /
• 1994

Instrumental determination was performed for the analysis of residues of ethylene oxide(EO), ethylene chlorohydrin(ECH) and ethylene glycol(EG) in white ginseng powders which were deaerated for 30 min after EO fumigation. Gas chromatographic data showed that EO residues were 570 ppm in the immediate samples after deaeration and 170 ppm in the stored ones for 8 days at 30$\pm$1$^{\circ}C$, respectively, showing a decreasing tendency with elapsed time. On the other hand, ECH and EG residues in samples as the secondary products of EO were 17, 650 ppm and 727 ppm stored for one month, and 9, 595 ppm and 221 ppm stored for 3 months, respectively.

• Korean Journal of Food Science and Technology
• /
• v.34 no.6
• /
• pp.1036-1042
• /
• 2002

During storage at $25^{\circ}C$, the effect of gas absorbents, such as carbon dioxide scavenger, ethylene absorber, and their combinations, on respiration characteristics and quality attributes of mature-green Mume fruits packaged in $30\;{\mu}m$ low density polyethylene (LDPE) film was examined. Changes in quality attributes of the fruits were observed in terms of weight loss, titratable acidity, pH, fish firmness, color, water-soluble solid, and chlorophyll contents. In the presence of ethylene absorber $(KMnO_4)$, the physiological injury was remarkably suppressed, and there was no significant injury in Mume fruits at $25^{\circ}C$ for 10 days. Yellowing and softening were also noticeably reduced by the combination of plastic film packaging and inclusion of ethylene absorber. The respiration rate was slower in fruits sealed with ethylene absorber than in those with absorbent-free packaging. Using ethylene absorber, levels of oxygen and carbon dioxide were maintained at 2-3 and 7-8%, respectively, during storage at $25^{\circ}C$ for 10 days. The addition of carbon dioxide scavenger $(Ca(OH)_2)$, negatively affected the quality attributes and respiration characteristics of the fruits. Overall results showed that ethylene removal by gas absorbent in the film packages significantly prolonged the shelf life of the fruits at ambient temperature.

• Korean Journal of Food Science and Technology
• /
• v.31 no.5
• /
• pp.1295-1299
• /
• 1999

This study was conducted to develop a index for the judgment of suitability of storage conditions by internal gas concentration of 'Fuji' apples under CA storage, and was examined the relationship between the levels of quality characteristics(flesh firmness, titratable acidity and surface green color) and the infernal ethylene and carbon dioxide concentrations of apples. The levels of quality characteristics were not decreased for terms of storage when the infernal ethylene concentration of apples was below 10 ppm, but the levels of quality characteristics were sharply decreased when it was above 10 ppm of Internal ethylene. The high levels of quality characteristics were maintained by the lower internal carbon dioxide concentration of apples, especially at below 2% of internal carbon dioxide. These result showed that the suitable condition for CA storage of 'Fuji' apples was a condition for having below 10 ppm of internal ethylene and below 2% of internal carbon dioxide in apples. The internal ethylene and carbon dioxide concentrations of apples during CA storage can be used as a crucial index for the suitability judgment of storage conditions.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2008.09a
• /
• pp.126-132
• /
• 2008

Cutting procedures whose qualifies are determined by various variables largely influences shipbuilding productivity. Particularly, defects in cutting shapes and cutting surface results in delay of the post shipbuilding stages such as welding and assemblage process. Because cutting procedures are influenced by various numbers of requirements according to the plate thickness, cutting precision can be maintained when the cutting conditions are appropriate. Existing cutting procedures utilize fossil fuels such as propane or ethylene as the main fuel component. Especially, when fossil fuel is applied to thick plate cutting, this process gives relatively slow cutting speed and generates large quantities of harmful polluting fumes. Recently, hydrogen-oxygen mixed gas generated by electrically dissociating water into Hydrogen and oxygen components is welcomed as an alternative fuel source. Also recent results report that alternative cutting fuel improves the cutting Dualities and speed. This paper presents that cutting characteristics and optimum cutting condition of hydrogen-oxygen mixed gas.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.1
• /
• pp.29-34
• /
• 2008

The charcoal has been used not only as fuel but also as human health care material since it was used. Charcoal's performances were generally investigated in aspects of energy efficiency and caloric values. This study was conducted in order to increase charcoal's application area and to develop functional paper. Five types of charcoal were used on a basis of gas absorption properties from previous study. Handsheets were made by two methods by internal loading and surface spray on interlayer. Strength properties of internal loading and interlayer spray handsheets were decreased as the charcoal loading increased. Ethylene gas absorption property was higher in both of oak's black charcoal and white charcoal than others. In terms of strength, 5-10% charcoal loading was efficient. Above 10% loading, a rate of strength decrease was higher than that of ethylene gas absorption rate. Formaldehyde absorption property was higher at both of oak's black charcoal and mixed charcoal than others. However, to guarantee enough charcoal loading should be higher than 95 $g/m^2$ for sufficient formaldehyde absorption.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.5 no.1
• /
• pp.68-86
• /
• 1995

This study was conducted at five Ethylene Oxide(EO) sterilizing processes in hospitals located in Seoul from August 8 to August 30, 1994. The main purposes of this study were to assess the TWA(Time Weighted Average) and short term exposures to EO and to evaluate factors affecting EO concentrations in sterilizing room. Results are summarized as follows. 1. The TWA concentrations of the sterilizing operators ranged from <0.005ppm to 3.04ppm and those of two sterilizing rooms out of five exceeded 1ppm, the Korean and ACGIH standards. 2. When the door of the sterilizer is opened at the end of the sterilization cycle, the short term concentrations of operators ranged from <0.005ppm to 11.4ppm, and those of three sterilizing room out of five exceeded 5ppm, the ACGIH short term exposure limit(STEL). The short term concentrations of area samples ranged from 0.24ppm to 49.2ppm and those of four sterilizing room out of five exceeded 5ppm. 3. Factors affecting EO exposure level were aeration type, the location of storage site for sterilized item, amount of gas, use period of sterilizer(p<0.005). 4. Following recommendations are suggested to minimize exposure to EO. The use of EO gas should be reduced by using another available sterilization methods, and the sterilizers and gas tank storage site should be isolated from, other work areas. Combination of local and general ventilation system should be installed. Metal carts or baskets for sterilization load should be used, and work environment and medical monitoring should be performed regularly.

• Journal of the Korean Chemical Society
• /
• v.7 no.2
• /
• pp.128-132
• /
• 1963

A study has been made on the applicability of gas-liquid partition chromatography to the qualitative and quantitative analysis of complex mixture of gaseous hydrocarbons. While phthalate columns are widely used for this $purpose^9$, they separates neither saturated hydrocarbons from the unsaturated nor n-butane from isobutene or butene-1, therefore combined columns such as phthalate and dimethylsulfolane have been used for the perfect separation of gaseous hydrocarbons. It is shown by this study, however, that hydrocarbons having $C_1$ through $C_4$ can be separated with a 2-meters tetraethyleneglycol dimethylether column except ethane from ethylene, and trans-from cis-2-butene especially operated at $15^{\circ}C$$ using helium as the carrier gas. The column effluents were in order of methane, (ethane, ethylene), propane, propylene, isobutane, n-butane, isobutylene, butene-1, (trans-& cis-2-butene, isopentane), (butadiene-1, 3, n-pentane). Two kinds of liquified petroleum gases in market are analysed qualitatively and quantitatively. The results indicate that use of this 2-meters TEGDE column permits the separation and identification of all the commonly encountered aliphatic gaseous hydrocarbons.