• Journal of the Korean Applied Science and Technology
• /
• v.33 no.4
• /
• pp.734-740
• /
• 2016

The micron-sized indium zinc tin oxide (IZTO) particles were prepared by spray pyrolysis from aqueous precursor solution for indium, zinc, and tin and organic additives such as citric acid (CA) and ethylene glycol (EG) were added to aqueous precursor solution for indium, zinc, and tin. The obtained IZTO particles prepared by spray pyrolysis from the aqueous solution without organic additives had spherical and filled morphologies, whereas the IZTO particles obtained with organic additives had more hollow and porous morphologies. The micron-sized IZTO particles with organic additives were changed fully to nano-sized IZTO particles, whereas the micron-sized IZTO particles without organic additives were not changed fully to nano-sized IZTO particle after post-treatment at $700^{\circ}C$ for 2 hours and wet-ball milling for 24 hours. Surface resistances of micron-sized IZTO's before post-heat treatment and wet-ball milling were much higher than those of nano-sized IZTO's after post-heat treatment and wet-ball milling. From IZTO with composition of 80 wt. % $In_2O_3$, 10 wt. % ZnO, and 10 wt. % $SnO_2$ which showed a smallest surface resistance IZTO after post-heat treatment and wet-ball milling, thin films were deposited on glass substrates by pulsed DC magnetron sputtering, and the electrical and optical properties were investigated.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2342-2348
• /
• 2014

Poly(lactic-co-glycolic acid) (PLGA) were grafted to both ends of Pluronic$^{(R)}$ F68 ($(EO)_{75}(PO)_{30}(EO)_{75}$) triblock copolymer to produce poly{(lactic acid)$_m$-co-(glycolic acid)$_n$}-b-poly(ethylene oxide)$_{75}$-b-poly(propylene oxide)$_{30}$-b-poly(ethylene oxide)$_{75}$-b-poly{(lactic acid)$_m$-co-(glycolic acid)$_n$} (PLGA-F68-PLGA) pentablock copolymers. Molecular weights of PLGA blocks were controlled and five kinds of pentablock copolymers with different PLGA block lengths were synthesized using in-situ ring-opening polymerization of D,L-lactide and glycolide with tin(II) 2-ethylhexanoate ($Sn(Oct)_2$) catalyst. PLGA-F68-PLGA pentablock copolymers were characterized by $^1H$- and $^{13}C$-NMR, GPC, and TGA. The numbers (2m, 2n) of repeating units for lactic acid and glycolic acid inside PLGA segments were obtained as (48, 17), (90, 23), (125, 40), (180, 59), and (246, 64), with $^1H$-NMR measurement. From NMR data, the resultant molecular weights were determined in the range of 12,700-29,700, which were similar to those obtained from GPC. Polydispersity index was increased in the range of 1.32-1.91 as the content of PLGA blocks increased. TG and DTG thermograms showed discrete degradation traces for PLGA and F68 blocks, which indicate the weight fractions of PLGA blocks in pentablock copolymers can be calculated by TG profile and it is possible to remove PLGA block selectively. Hydrodynamic radius and radius of gyration of pentablock copolymer micelle were obtained in the range of 46-68 nm and 31-49 nm, respectively, in very dilute (i.e. 0.005 wt %) aqueous solution of THF:$H_2O$ = 10:90 by volume at $25^{\circ}C$.

• Korean Chemical Engineering Research
• /
• v.49 no.6
• /
• pp.758-763
• /
• 2011

In this work, polymer composite electrolytes were prepared by a blend of poly(methyl methacrylate) (PMMA) and poly(ethylene oxide) (PEO) as a polymer matrix, propylene carbonate as a plasticizer, $LiClO_4$ as a salt, and by containing a different content of $TiO_2$, by using the solution casting method. The crystallinity and ionic conductivity of the polymer electrolytes was evaluated using X-ray diffraction(XRD) and AC impedance method, respectively. The morphology of composite electrolyte film was analyzed by SEM method. From the experimental results, by increasing the $TiO_2$ content, crystallinity of PEO was reduced, and ionic conductivity was increased. In particular, the ionic conductivity was dependent on the content of $TiO_2$ and showed the highest value 15 wt%. However, when $TiO_2$ content exceeds 15 wt%, the ionic conductivity was decreased. According to the surface morphology, the ionic conductivity was decreased because the polymer composite electrolytes showed a heterogenous morphology of fillers due to immiscibility or aggregation of the filler within the polymer matrix.

• Journal of the Korean Electrochemical Society
• /
• v.21 no.4
• /
• pp.80-87
• /
• 2018

Safety issues in Li-ion battery system have been prime concerns, as demands for power supply device applicable to wearable device, electrical vehicles and energy storage system have increased. To solve safety problems, promising strategy is to replace organic liquid electrolyte with non-flammable solid electrolyte, leading to the development of all-solid-state battery. However, relative low conductivity and high resistance from rigid solid-solid interface hinder a wide application of solid electrolyte. Composite electrolytes composed of organic and inorganic parts could be alternative solution, which in turn bring about the increase of conductivity and conformal contact at physically rough interfaces. In our study, composite electrolytes were prepared by combining poly(ethylene oxide)(PEO) and $Li_7La_3Zr_2O_{12}$ (LLZO). The crystallinity, morphology and electrochemical performances were investigated with the control of LLZO contents from 0 wt% to 50 wt%. From the results, it is concluded that optimum content and uniform dispersion of LLZO in polymer matrix are significant to improve overall conductivity of composite electrolyte.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.69.1-69.1
• /
• 2010

We have fabricated organic photovoltaic cells (OPVs) with highly conductive poly 3,4-ethylenedioxythiophene : poly styrenesulfonate (PEDOT:PSS) layer as an anode without using transparent conducting oxide (TCO), which has been modified by adding some organic solvents like sorbitol (So), dimethyl sulfoxide (DMSO), N-methyl-pyrrolidone (NMP), dimethylformamide (DMF), and ethylene glycol (EG). The conductivity of PEDOT:PSS film modified with each additive was enhanced by three orders of magnitude. According to atomic force microscopy (AFM) study, conductivity enhancement might be related to better connections between the conducting PEDOT chains. TCO-free solar cells with modified PEDOT:PSS layer and the active layer composed of poly(3-hexylthiophene) (P3HT) and phenyl [6,6] C61 butyric acid methyl ester (PCBM) exhibited a comparable device performance to indium tin oxide (ITO) based organic solar cells. The power conversion efficiency (PCE) of the organic solar cells incorporating DMSO, So + DMSO and EG modified PEDOT:PSS layer reached 3.51, 3.64 and 3.77%, respectively, under illumination of AM 1.5 (100mW/$cm^2$).

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.2
• /
• pp.83-92
• /
• 1998

${\alpha}-sulfonated$ fatty acid polyethylene glycol esters with polyethylene oxide(addition, 3, 5, 10mol) were synthesized through esterification of ${\alpha}-sulfonated$ fatty acid methyl esters with alkyl chain length $C_{12}{\sim}C_{18}$. Their compounds were separated with column chromatography, and confirmed by TLC. Quantitative analysis of all the sulfonates were performed according to JIS K-3362 method, and ethylene oxide unit number were determined by ISO 2270 method. Structural properties of ${\alpha}-sulfonated$ fatty acid methyl esters and their derivatives were also identified from IR, and $^1H$ NMR spectra.

• Journal of the Korean Chemical Society
• /
• v.19 no.6
• /
• pp.423-427
• /
• 1975

Changes in the electrical conductivity of gallium doped zinc oxide during the dehydrogenative oxidation of ethanol between 250 and $350^{\circ}C$ have been studied. Both dehydrogenation and dehydration of ethanol takes place on ZnO. At $300^{\circ}C$ and above formation of $CO_2$ was observed accompanied by an increase in the electrical conductivity. This seems to be due to oxidation of CO formed by the decomposition of acetaldehyde. Addition of oxygen to ethanol increases the amount of acetaldehyde formed, while no change is observed in ethylene formation. It may be that oxygen which is present primarily as $O^-$ provides a favorable site for the adsorption of ethanol and for subsequent hydrogen substraction.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.6
• /
• pp.471-476
• /
• 2003

Au/oxide/n-InP Schottky diodes were fabricated from heteroepitaxial InP layers grown on GaAs substrates by the metalorganic vapor phase epitaxy (MOVPE) method from a new combination of source materials: ethyldimethylindium (EDMIn) and tertiarybutylphosphine (TBP). Anodic oxidation technique by using a solution of 10 g of ammonium pentaborate in 100 cc of ethylene glycole as the electrolyte was used to deposit a thin oxide layer. The barrier heights determined from three different techniques, current-voltage (I-V) measurements at room temperature and in the temperature range of 273 K - 373 K, and room temperature capacitance-voltage (C-V) measurements are in good agreement, 0.7 - 0.9 eV which is considerably high as compared to the 0.45 - 0.55 eV in Au/n-InP Schottky diode without a Passivation layer. The ideality factors of 1.1 - 1.3 of the Schottky diodes were also determined from the I-Y characteristics. Deep level transient spectroscopy (DLTS) studies revealed only one shallow electron state at 92.6 meV below the bottom of the conduction band and no deep state in the heteroepitaxial InP layers grown from EDMIn and TBP.

• Journal of Pharmaceutical Investigation
• /
• v.31 no.1
• /
• pp.1-5
• /
• 2001

The aggregation behavior of nystatin (NYS) in the presence of pluronic F127, triblock copolymer of poly (ethylene oxide) (PEO) and poly (propylene oxide) (PPO), was measured and correlated with hemolytic activity. Antifungal activity was also studied using Saccharomyces cerevisiae as a model strain. The critical aggregation concentrations (CAC) of the drug were 50.1, 108.0, 134.2, 154.3, and $217.9\;{\mu}M$ at 0.1%, 0.5%, 1.0%, 1.5%, and 2.0% pluronic F127 solution, respectively. The levels of NYS required to start lysis of erythrocytes were about 80, 100, 125, 150, and $200\;{\mu}M$ at 0.1%, 0.5%, 1.0%, 1.5%, and 2.0% pluronic F127 solution, respectively. It was $50\;{\mu}M$ in the absence of the polymer. Minimal inhibitory concentration (MIC) and minimal fungicidal concentration (MFC) of NYS-pluronic F127 lyophilizate were same at $3\;{\mu}g/ml$, while MIC and MFC of pure NYS are $3\;{\mu}g/ml$ and $12\;{\mu}g/ml$, respectively. By modulating the aggregation behavior of NYS, pluronic F127 was able to reduce the toxicity of the drug without compromising the MIC and MFC.

• Macromolecular Research
• /
• v.15 no.7
• /
• pp.646-655
• /
• 2007

To achieve targeted drug delivery for chemotherapy, a ligand-mediated nanoparticulate drug carrier was designed, which could identity a specific receptor on the surfaces of tumor cells. Biodegradable poly(ethylene oxide)/poly$({\varepsilon}-caprolactone)$ (PEG/PCL) amphiphilic block copolymers coupled to biotin ligands were synthesized with a variety of PEG/PCL compositions. Block copolymeric nanoparticles harboring the anticancer drug paclitaxel were prepared via micelle formation in aqueous solution. The size of the biotin-conjugated PEG/PCL nanoparticles was determined by light scattering measurements to be 88-118 nm, depending on the molecular weight of the block copolymer, and remained less than 120 nm even after paclitaxel loading. From an in vitro release study, biotin-conjugated PEG/PCL nanoparticles containing paclitaxel evidenced sustained release profiles of the drug with no initial burst effect. The biotin-conjugated PEG/PCL block copolymer itself evidenced no significant adverse effects on cell viability at $0.005-1.0{\mu}g/mL$ of nanoparticle suspension regardless of cell type (normal human fibroblasts and HeLa cells). However, biotin-conjugated PEG/PCL harboring paclitaxel evidenced a much higher cytotoxicity for cancer cells than was observed in the PEG/PCL nanoparticles without the biotin group. These results showed that the biotin-conjugated nanoparticles could improve the selective delivery of paclitaxel into cancer cells via interactions with over-expressed biotin receptors on the surfaces of cancer cells.