• Korean Chemical Engineering Research
• /
• 제53권3호
• /
• pp.302-308
• /
• 2015

본 연구에서는 3-Methylpentane을 포함하는 Ethylene glycol monopropyl ether ($C_3E_1$) 및 Ethylene glycol isopropyl ether ($iC_3E_1$) 계면활성제 혼합물에 대한 2성분계 기-액 상 평형을 서로 다른 온도 조건(303.15, 318.15, 333.15K)에서 측정 및 비교하였다. $C_3E_1$은 분자 내 수소결합과 분자 간 수소결합이 동시에 나타나는 자가 회합 성 물질이므로 상 평형 예측을 어렵게 하는 경향이 있다. 본 연구의 목적은 $C_3E_1$ 혼합물과 그 이성질체인 $iC_3E_1$ 혼합물의 상 평형을 각각 측정 및 비교함으로써, 자가 회합 성 물질의 이성질체가 상 평형에 어떠한 영향을 미치는지 알아보는 것이다. 측정된 시스템은 PR-WS-NRTL, PR-WS-UNIQUAC, 그리고 PR-WS-WILSON 모델을 이용하여 각각 계산하고 각 모델의 성능을 비교하였다. 계산에 사용된 모델은 대부분 좋은 결과를 보여주었으며, 특히 PR-WS-NRTL 모델이 가장 좋은 결과를 나타냈다. 또한 측정 시스템 간의 상 평형 차이가 크게 발생하지 않은 것으로 보아 자가 회합 성 물질의 이성질체가 상 평형에 끼치는 영향은 크지 않음을 알 수 있었다.

• Journal of Pharmaceutical Investigation
• /
• 제33권1호
• /
• pp.45-49
• /
• 2003

The solubility and stability of ondansetron hydrochloride (OS) in various vehicles were determined. The effect of cyclodextrins (CD) on the solubility of OS in water was determined by equilibrium solubility method. The solubility of OS at $32^{\circ}C$ increased in the rank order of isopropyl myristate (IPM) < propylene glycol laurate (PGL) ${\ll}$ propylene glycol monolaurate < propylene glycol monocaprylate (PGMC) < poly(ethylene glycol) 400 < diethylene glycol mono ethyl ether (DGME) < ethanol < poly(ethylene glycol) 300 < water (36.1 mg/ml) ${\ll}$ propylene glycol (PG) (283 mg/ml). The addition of PG or DGME to non-aqueous vehicles such as IPM, PGL and PGMC markedly increased the solubility of OS. The addition of CDs in water increased the solubility. Apparent stability constant for the CD complexation with OS was calculated to be $25.5\;M^{-1}$ for $2-hydroxypropyl-{\beta}-CD\;(2HP{\beta}CD)$. Twenty mM ${\beta}-CD$, 69.4 mM sulfobutyl ether ${\beta}-CD$ and 115.4 mM $2HP{\beta}CD$ increased the aqueous solubilty of OS 1.27, 2.18 and 1.85 times, respectively. OS was stable in buffered aqueous solution (pH 5.0). However, OS was relatively unstable in non-aqueous vehicles in the order of PG

• Safety and Health at Work
• /
• 제2권1호
• /
• pp.39-51
• /
• 2011

Objectives: This study was designed to evaluate exposure levels of various chemicals used in wafer fabrication product lines in the semiconductor industry where work-related leukemia has occurred. Methods: The research focused on 9 representative wafer fabrication bays among a total of 25 bays in a semiconductor product line. We monitored the chemical substances categorized as human carcinogens with respect to leukemia as well as harmful chemicals used in the bays and substances with hematologic and reproductive toxicities to evaluate the overall health effect for semiconductor industry workers. With respect to monitoring, active and passive sampling techniques were introduced. Eight-hour long-term and 15-minute short-term sampling was conducted for the area as well as on personal samples. Results: The results of the measurements for each substance showed that benzene, toluene, xylene, n-butyl acetate, 2-methoxy-ethanol, 2-heptanone, ethylene glycol, sulfuric acid, and phosphoric acid were non-detectable (ND) in all samples. Arsine was either "ND" or it existed only in trace form in the bay air. The maximum exposure concentration of fluorides was approximately 0.17% of the Korea occupational exposure limits, with hydrofluoric acid at about 0.2%, hydrochloric acid 0.06%, nitric acid 0.05%, isopropyl alcohol 0.4%, and phosphine at about 2%. The maximum exposure concentration of propylene glycol monomethyl ether acetate (PGMEA) was 0.0870 ppm, representing only 0.1% or less than the American Industrial Hygiene Association recommended standard (100 ppm). Conclusion: Benzene, a known human carcinogen for leukemia, and arsine, a hematologic toxin, were not detected in wafer fabrication sites in this study. Among reproductive toxic substances, n-butyl acetate was not detected, but fluorides and PGMEA existed in small amounts in the air. This investigation was focused on the air-borne chemical concentrations only in regular working conditions. Unconditional exposures during spills and/or maintenance tasks and by-product chemicals were not included. Supplementary studies might be required.