• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.4
• /
• pp.485-493
• /
• 2002

Different factors may affect the sensitivity of porcine oocytes during cryopreservation. The effect of two methods (cooling and vitrification), four cryoprotectants [glycerol (GLY), 1, 2-propanediol (PROH), dimethyl sulfoxide (DMSO) or ethylene glycol (EG)] and two vitrification media (1 M sucrose (SUC)+8 M EG; 8 M EG) on the developmental capacity of porcine oocytes at the germinal vesicle (GV) stage or after IVM at the metaphase II (M II) stage were examined. Survival was assessed by FDA staining, maturation and cleavage following IVF and IVC. A toxicity test for different cryoprotectants (GLY, PROH, DMSO, EG) was conducted at room temperature before cooling. GV and M II-oocytes were equilibrated stepwise in 1.5 M cryoprotectant and diluted out in sucrose. The survival rate of GV-oocytes in the GLY group was significantly lower (82%, p<0.01) than that of the other group (92 to 95%). The EG group achieved a significantly higher maturation rate (84%, p<0.05) but a lower cleavage rate (34%, p<0.01) than the DMSO group and the controls. For M II-oocytes, the survival rates for all groups were 95 to 99% and the cleavage rate of the GLY group was lower than the PROH-group (21 vs 43%, p<0.01). After cooling to $10^{\circ}C$, the survival rates of GV-oocytes in the cryoprotectant groups were 34 to 51%, however, the maturation rates of these oocytes were low (1%) and none developed after IVF. For M II-oocytes, the EG group showed a significantly higher survival rate than those of the other cryoprotectant groups (40% vs 23-26%, p<0.05) and the cleavage rates of PROH, DMSO and EG group reached only 1 to 2%. For a toxicity test of different vitrification media, GV and M II-oocytes were equilibrated stepwise in 100% 8 M EG (group 1) and 1 M SUC + 8 M EG (group 2) or equilibrated in sucrose and then in 8 M EG (SUC+8 M EG, group 3). For GV-oocytes, the survival, maturation and cleavage rates of Group 1 were significantly lower than those in group 2, 3 and control group (p<0.05). For M II-oocytes, there were no differences in survival, maturation and cleavage rates between groups. After vitrification, the survival rates of GV and M II-oocytes in group 2 and 3 were similarly low (4-9%) and none of them matured nor cleaved after in vitro maturation, fertilization and culture. In conclusion, porcine GV and M II-oocytes do not seem to be damaged by a variety of cryoprotectants tested, but will succumb to a temperature decrease to $10^{\circ}C$ or to the process of vitrification, regardless of the cryoprotectant used.

• Journal of Embryo Transfer
• /
• v.22 no.1
• /
• pp.21-26
• /
• 2007

본 연구는 mSOF(modified synthetic oviduct fluid medium) 배양액을 이용하여 $100{\mu}1$와 $10{\mu}1$ 배양 소적에서 일본 흑우의 수정란 생산 효율을 개선하기 위하여 수행하였다. 난구세포가 부착된 미성숙 난자는 각각 단독 배양조건($S;\;10{\mu}1$ 소적) 및 그룹 배양 조건 ($G;\;100{\mu}1$ 소적)에서 실시하였고 배양액은 TCM-199의 기본 배지에 10% FCS, 0.02IU/ml FSH와 $1{\mu}g/ml$ $estradiol-17{\beta}$를 첨가하여 사용하였다. 배반포 단계로 발육한 수정란은 1.5M ethylene glycol로 직접 이식법에 의한 동결 방법으로 동결을 실시하였고, 세포수는 융해 후 생존 수정란에 대해 조사하였다. 체외 배양 시간이 $16{\sim}17$시간 배양 조건에서 난자의 성숙율은 그룹 배양 조건$(27.1{\pm}16.8%)$보다는 단독 배양조건$(57.1{\pm}15.0%)$에서 성숙율이 높았다(p<0.05). 그러나 체외 배양 시간이 $18{\sim}19$ 시간과 $20{\sim}21$시간 배양시는 유사한 성숙율을 보였다. 난자의 체외 배양율은 체외 배양 시간의 증가에 의해 성숙도가 $86.3{\pm}9.9%$로 증가하였다. 접합체(zygote)의 분할율은 단독이나 그룹 배양 조건에서도 유사한 결과를 얻었다. 배반포 발달율은 배양 $7{\sim}8$일째에 조사한 결과 단독 배양 방법보다는 그룹 배양 방법에서 발달율이 높았으나, 분할된 접합체를 기준으로 한 경우 배반포 발달율$(S;\; 21.4{\pm}10.6%,\;G;\;39.0{\pm}13.1%)$에서는 유의적인 차이가 없었다. 단독 배양과 그룹 배양에서 $6.5{\pm}8$일 사이에 배반포로 발달된 수정란의 세포수 조사에서는 유사한 결과를 얻었다. 동결 융해 후 24시간 배양 후 배반포 생존율(5; 24.2%, G; 30.2%), 부화율(S: 20.9%, G: 12.7%) 및 생존 수정란수(S; 45.2%, G: 42.8%)에서도 배양 조건에 따른 유의적인 차는 없었다. 결론적으로 mSOF배양액을 이용하는 경우 미성숙 난자의 체외 성숙 유도 배양 시 단독이나 그룹 배양 시 배반포 발달율에서 그룹간에 유의적인 차가 인정되었다(p<0.01).

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.20
• /
• pp.8693-8698
• /
• 2014

Background: Up-regulation of hsp90 gene expression occurs in numerous cancers such as lung cancer. D,L-lactic-co-glycolic acid-poly ethylene glycol-17-dimethylaminoethylamino-17-demethoxy geldanamycin (PLGA-PEG-17DMAG) complexes and free 17-DMAG may inhibit the expression. The purpose of this study was to examine whether nanocapsulating 17DMAG improves the anti cancer effect over free 17DMAG in the A549 lung cancer cell line. Materials and Methods: Cells were grown in RPMI 1640 supplemented with 10% FBS. Capsulation of 17DMAG is conducted through double emulsion, then the amount of loaded drug was calculated. Other properties of this copolymer were characterized by Fourier transform infrared spectroscopy and H nuclear magnetic resonance spectroscopy. Assessment of drug cytotoxicity on the grown of lung cancer cell line was carried out through MTT assay. After treatment, RNA was extracted and cDNA was synthesized. In order to assess the amount of hsp90 gene expression, real-time PCR was performed. Results: In regard to the amount of the drug load, IC50 was significant decreased in nanocapsulated(NC) 17DMAG in comparison with free 17DMAG. This was confirmed through decrease of HSP90 gene expression by real-time PCR. Conclusions: The results demonstrated that PLGA-PEG-17DMAG complexes can be more effective than free 17DMAG in down-regulating of hsp90 expression by enhancing uptake by cells. Therefore, PLGA-PEG could be a superior carrier for this kind of hydrophobic agent.

• Korean Journal of Materials Research
• /
• v.25 no.12
• /
• pp.719-726
• /
• 2015

For a decade, solution-processed functional materials and various printing technologies have attracted increasingly the significant interest in realizing low-cost flexible electronics. In this study, Cu nanoparticles are synthesized via the chemical reduction of Cu ions under inert atmosphere. To prevent interparticle agglomeration and surface oxidation, oleic acid is incorporated as a surface capping molecule and hydrazine is used as a reducing agent. To endow water-compatibility, the surface of synthesized Cu nanoparticles is modified by a mixture of carboxyl-terminated anionic polyelectrolyte and polyoxylethylene oleylamine ether. For reducing the surface tension and the evaporation rate of aqueous Cu nanoparticle inks, the solvent composition of Cu nanoparticle ink is designed as DI water:2-methoxy ethanol:glycerol:ethylene glycol = 50:20:5:25 wt%. The effects of poly(styrene-co-maleic acid) as an adhesion promoter(AP) on rheology of aqueous Cu nanoparticle inks and adhesion of Cu pattern printed on polyimid films are investigated. The 40 wt% aqueous Cu nanoparticle inks with 0.5 wt% of Poly(styrene-co-maleic acid) show the "Newtonian flow" and has a low viscosity under $10mPa{\cdots}S$, which is applicable to inkjet printing. The Cu patterns with a linewidth of $50{\sim}60{\mu}m$ are successfully fabricated. With the addition of Poly(styrene-co-maleic acid), the adhesion of printed Cu patterns on polyimid films is superior to those of patterns prepared from Poly(styrene-co-maleic acid)-free inks. The resistivities of Cu films are measured to be $10{\sim}15{\mu}{\Omega}{\cdot}cm$ at annealing temperature of $300^{\circ}C$.

• Korean Chemical Engineering Research
• /
• v.44 no.4
• /
• pp.350-355
• /
• 2006

Growth curves of microbes were examined to evaluate decomposition of metal-working fluids and decomposition properties of metal-working fluids were experimented using controled microbes such as E. coli and K. pnemoniae. According to the results of growth curve of microbes, the growth period depended on species of microbes, 2 h of E. coli, 3 h of K. pneumoniae, 4 h of P. aeruginosa and 3 h of P. oleovarans after incubation. The colony count of E. coli and K. pneumoniae controled to OD of 0.5 ranged from $4.4{\sim}10.0{\times}10^5CFU/mL$ and $1.8{\sim}9.5{\times}10^7CFU/mL$, respectively. The decomposition of metal-working fluids was excellently progressed in the range of pH 6~8 than below pH 4 and above pH 10. In the case of controled fluids to pH 6~8, the decomposition of the fluid containing ester group was more accelerated than that of the fluid containing ethylene glycol.

• Korean Chemical Engineering Research
• /
• v.47 no.1
• /
• pp.84-88
• /
• 2009

Al doped $LiMn_2O_4$ cathode powders with fine size were synthesized by an ultrasonic spray pyrolysis method from the spray solution with citric acid and ethylene glycol. The as-prepared powders with spherical shape, porous structure and micron size turned into $LiMn_{11/6}Al_{1/6}O_4$ powders with micron size and regular morphology after post-treatment above $800^{\circ}C$. The $LiMn_{11/6}Al_{1/6}O_4$ powders had low initial discharge capacity of 94 mAh/g at a post-treatment temperature of $700^{\circ}C$. As the post-temperature increased from $750^{\circ}C$ to $1,000^{\circ}C$, the initial discharge capacities of the $LiMn_{11/6}Al_{1/6}O_4$ powders changed from 103 to 117 mAh/g. The $LiMn_{11/6}Al_{1/6}O_4$ powders had the maximum discharge capacity at a post-treatment temperature of $750^{\circ}C$. However, the $LiMn_{11/6}Al_{1/6}O_4$ powders post-treated at a temperature of $900^{\circ}C$ had the good cycle properties. The discharge capacities of the $LiMn_{11/6}Al_{1/6}O_4$ powders dropped from 107 to 100 mAh/g (93% capacity retention) by the 70th cycle at a current density of 0.1 C.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.694-702
• /
• 2014

The micron-sized ITO(indium tin oxide) particles were prepared by spray pyrolysis from aqueous precursor solutions for indium, and tin and organic additives solution. Organic additives solution with citric acid(CA) and ethylene glycol(EG) were added to aqueous precursor solution for Indium and Tin. The obtained ITO particles prepared by spray pyrolysis from the aqueous solution without organic additives solution had spherical and filled morphologies whereas the obtained ITO particles with organic additives solution had more hollow and porous morphologies with increasing mole of organic additives. The micron-sized ITO particle with organic additives was changed fully to nano-sized ITO particle whereas the micron-sized ITO particle without organic additives was not changed fully to nano-sized ITO particle after post-treatment at $700^{\circ}C$ for 2 hours and wet-ball milling for 24 hours. The size of primary ITO particle by Debye-Scherrer formula and surface resistance of ITO pellet were measured.

• Korean Journal of Animal Reproduction
• /
• v.18 no.1
• /
• pp.55-62
• /
• 1994

This study was carried out to test the effects of fluorescein diacetate(FDA 0${mu}ell$/ml, 0.5${mu}ell$/ml, 5${mu}ell$/ml, 10${mu}ell$/ml or 0${mu}ell$/ml, 5${mu}ell$/ml in PBS) treated before culture on the survival of vitrified mouse morulae in vitrification solution(20% glycerol＋glycerol＋10% ethylene glycol＋30% ficoll＋10% sucrose). The results were summarized as follows; 1. The survival rate of FDA-tested fresh mouse morulae after 24 hours culture was over 96%((P4.8) in the control or treatment groups with various levels of FDA. Because the rate of mouse morulae which developed to hatched blastocysts was higher with the various levels of FDA treatment(67%) than control(50%), it was considered that toxicity of FDA did not affect the survival of mouse morulae. 2. When mouse morulae were FDA-tested in FDA 0(control), 0.5, 5, and 10${mu}ell$/ml treatment after vitrification, the development rate to expanded blastocyst were 66, 82, 64 and 76%, and FDA scores were P4.2(84%), P4.7(94%), P4.2(84%) and P3.9(78%), respectively. There were no significant differences between control and FDA treatments, but there were significant difference between 0.5${mu}ell$/ml)94%) and 10${mu}ell$/ml(78%) treatment(P<0.01). 3. The survival rates of cultured mouse morulae according to FDA-scores(P0=non-fluorescence; P1~P5=according to their fluorescence) after vitrification were P5;92%, P4;67%, P3;42% and P2.P0;0%, respectively. 4. Implantation rates of morulae stage embryos cultured into early blastocysts and implanted into uterine hornes vitrification were 14 and 11% embryos treated control(0${mu}ell$/ml) and FDA 5${mu}ell$/ml and the normal fetus development was 2% embryos for both treatments. Results of this percent study indicated that toxicity of FDA does not affect not only the survival of fresh and vitrified mouse morulae but also the development rate and implantation of fetus after transfer as well. The development rates of mouse morulae with the FDA score of P5, P4 and P3 were 92, 67 and 42%, respectively, it was considered that FDA-test was fit for the judge of survival.

• Reproductive and Developmental Biology
• /
• v.35 no.2
• /
• pp.137-141
• /
• 2011

These study was to investigate the in vitro fertilization and viability of fresh and vitrified oocytes. Also, the developmental capacity of IVF and intracytoplasmic sperm injection (ICSI) oocytes were investigated. Then vitrification was performed with the use of 20% ethylene glycol + 20% DMSO + 0.5 M sucrose + 10% FCS + TCM-199 medium. Vitrification immature oocytes are cultured in vitrification solution for 10 min afterwards transferred to expose at room temperature for 5 min. and transferred to the ice water for 5 min. The oocytes were sealed in a 1.0 mm straw and placed in a $LN_2$ container. Frozen oocytes were rapidly thawed in a water bath at $30{\sim}35^{\circ}C$, and then placed in TCM-199 medium containing 0.5 M sucrose for 5 min each, respectively, at $38^{\circ}C$. After being washed for 2~3 times, using fresh medium the oocytes were cultured in TCM-l99 medium supplemented with 5% FCS at $38^{\circ}C$ in 5% $CO_2$ and air. The normal morphology of fresh and vitrified-thawed oocytes were $87.1{\pm}2.1%$ and $54.8{\pm}2.5%$, respectively. The viability rates of fresh and vitrified-thawed oocytes were $70.0{\pm}2.2%$ and $41.9{\pm}2.6%$, respectively. Viability rates of vitrified-thawed oocytes were lower than that of fresh follicular oocytes (p<0.05). The in vitro maturation rates of fresh and vitrified oocytes were $45.1{\pm}3.6%$ and $28.9{\pm}4.4%$, respectively. The IVF rates of fresh follicular and vitrified-thawed oocytes were 34.00.2% and $20.2{\pm}2.6%$, respectively. The in vitro maturation and fertilization rates of vitrified-thawed oocytes were lower than those of the fresh follicular oocytes (p<0.05). A total of 350 oocytes were fixed and stained after co-incubation with spermatozoa, of which 88 had identifiable nuclear material. After IVF for 20 hrs, $25.1{\pm}3.4%$ of the oocytes found to have been penetrated by spermatozoas. Oocytes were fixed and stained after ICSI, and 105 oocytes contained identifiable nuclear material. After IVF and ICSI for 20 hrs, $34.3{\pm}3.4%$ and $59.0{\pm}2.0%$ of the oocytes were found to have been penetrated by spermatozoas. The developmental rates upon ICSI were significantly higher than those of the IVF method (p<0.05).

• The Korean Journal of Physiology and Pharmacology
• /
• v.1 no.4
• /
• pp.425-434
• /
• 1997

Many reports represent that angiotensin II (ANG II) caused a dose dependent biphasic effects on fluid transport in the proximal tubule. However, respective roles of different signaling pathways in mediating these effects remain unsettled. The aim of the present study was to examine signaling pathways at high doses of ANG II on the $Na^+$ uptake of primary cultured rabbit renal proximal tubule cells(PTCs) in hormonally defined serum-free medium. High concentrations of ANG II $(>10^{-9}\;M)$ inhibited $Na^+$ uptake and increased $[Ca^{2+}]_i\;level$ in the PTCs. However, low concentrations of $(<10^{-11}\;ANG\;II)$ stimulated $Na^+$ uptake and did not affect $[Ca^{2+}]_i\;level$. 8-(N, N-diethylamino)-octyl-3,3,5- trimethoxybenzoate (TMB-8), ethylene glycol-bis$({/beta}-amino\;ethyl ether)-N,N,N'$, N'-tetra acetic acid (EGTA), and nifedifine partially blocked the inhibitory effects of ANG II on $Na^+$ uptake. When ANG II and bradykinin (BK) were treated together, $Na^+$ uptake was further reduced $(88.47{\pm}1.98%\;of\;that\;of\;ANG\;II,\;81.85{\pm}1.84%\;of\;that\;of\;BK)$. In addition, W-7 and KN-62 blocked the ANG II-induced inhibition of $Na^+$ uptake. Arachidonic acid reduced $Na^+$ uptake in a dose-dependent manner. When ANG II and arachidonic acid were treated together, inhibitory effects on $Na^+$ uptake significantly exhibited greater reduction than that of each group, respectively. When PTCs were treated by mepacrine $(10^{-6}\;M)$ and AACOCF3 $(10^{-5}\;M)$ for 1 hr before the addition of $(<10^{-9}\;ANG\;II)$, the inhibitory effect of ANG II was reversed. In addition, econazole $(>10^{-6}\;M)$ blocked ANG II-induced inhibition of $Na^+$ uptake. In conclusion, the $[Ca^{2+}]_i$ (calcium-calmodulin-dependent kinase) and phospholipase $A_2\;(PLA_2)$ metabolites are involved in the inhibitory effects of ANG II on $Na^+$ uptake in the PTCs.