• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.9
• /
• pp.485-490
• /
• 2006

According to the computerization of railway signaling systems, the interface link between the signaling systems has been replaced by the digital communication channel. At the same time, the importance of the communication link is more pronounced than before. In this paper, new Network-based protocol between railway signaling and SCADA (Supervisory Control and Data Acquisition system) has designed and the overview of designed protocol is briefly represented. And also this paper addresses analysis of newly designed train control systems. Fame error rates of the data transmissions are calculated and compared for the two cases that the CTC (Centralized Traffic Control)/SCADA has an extra data transmission error control (CRC16) besides the inherent error control of the Ethernet and that the CTC/SCADA has no extra data transmission error control. With simulation results it has been verified that the additional error control code contributes to lowering the frame error rate. It will be expected to increase the safety, reliability and efficiency of maintenance of the signaling systems by using the designed protocol for railway signaling system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.3
• /
• pp.213-219
• /
• 2017

Recently, the Internet Protocol Television (IPTV) services have become very common, enabling various Internet-based services as well as watching TV. In the IPTV system, a Set-Top box (STB) plays a key role as a network terminal device that transmits and receives realtime multimedia contents. In addition, the IPTV networks are usually supported by broadband optical fiber-base network such as fiber-to-the-home (FTTH), However, a general IPTV STB is regarded as one of the local area network (LAN)-attached devices while sharing the bandwidth of the LAN (e.g., Ethernet). In order to overcome the limited bandwidth utilization by fully facilitating the broadband bandwidth (e.g., 1 Gbps) of the optical fiber-based network, we propose a new FC (Fiber Channel)-embedded IPTV STB which can be directly attached to the optical fiber network. Then, we verify that the impacts of the proposed FC-embedded IPTV STB by organizing the the FC-AL (Fiber Channel-Arbitration Loop) network equipped with the FC-embedded IPTV We measures the average Start-up Delay, Average Reject Ratio and the Number of Concurrent Users through extensive simulations to investigate the performances of the suggested FC-AL-based IPTV network. Surprisingly, the IPTV network architecture with the proposed FC-embedded IPTV STBs has an excellent average start-up delay of less than 10 msec, an acceptable average reject ratio of less than 3 % as well as a linear increase of the number of concurrent users when extending the architecture. This reveals that the proposed FC embedded STB has a superior impacts on the performance of the entire IPTV network by effectively utilizing the broadband bandwidth of the fiber optic-based network.

• Convergence Security Journal
• /
• v.13 no.3
• /
• pp.25-31
• /
• 2013

Looking at the recent value change of users and the usage pattern of network users, it is changing from simple web information, one-way information acquisition and data transmission to increase of usage of multimedia, increasing demand for security and customization, and increasing demands for free mobility. Due to this change of demand, the services which were provided individually, developed into a form which is merged, the network also seems to develop into the combined network from the individual network for individual service, and the communication network control technology which is the core technology is also rapidly developing. To reflect the users' demands, the next generation network created the multi-layer network which is based on the WDM/IP transmission system and added the to make it easy to restructure. P-OTS (Packet-Optical Transport System) can be defined as a platform that combines SONET/SDH, Ethernet, DWDM, optical transport network (OTN) switching and reconfigurable optical add-drop multiplexers (ROADMs). In this paper, we suggested that the optimum path choice be performed through diversification of the PCE-based path selection using the information of various layers altogether in the multi-layer environment, compared with the established path selection method when the path was selected using the information of each layers.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.6
• /
• pp.1159-1168
• /
• 2020

In the past, control and monitor of a large number of instruments is a specialized area, which requires an expensive dedicated module to implement. However, with the recent development of embedded technology, various products capable of performing M&C (Monitor and Control) have been released, and the scope of application is expanding. Accordingly, it is possible to more easily build a small M&C environment than before. In this paper, we discussed a method to replace the M&C of the VLBI system, which had to be implemented through a specialized hardware product, with an inexpensive general imbeded technology. Memory based data transmission, reception and storage is a technology that is already generalized not only in VLBI but also in the network field, and more effective M&C can be implemented when some items of Ethernet are optimized for the VLBI (Very Long Baseline Interferometer) system environment. In this paper, we discuss in depth the design and implementation for the multidrop based IoT architecture.

• Journal of the Korea Convergence Society
• /
• v.8 no.8
• /
• pp.9-15
• /
• 2017

With the development of semiconductor integration technology, central processing units and storage devices have been miniaturized and performance has been rapidly developed, interconnection network technology is becoming a more important factor in terms of the performance of high performance computing system. In this paper, we analyze the trend of interconnection network technology used in high performance computing. Interconnect technology, which is the most widely used in the Supercomputer Top 500(2017. 06.), is an Infiniband. Recently, Ethernet is the second highest share after InfiniBand due to the emergence of 40/100Gbps Gigabit Ethernet technology. Gigabit Ethernet, where latency performance is lower than InfiniBand, is preferred in cost-effective medium-sized data centers. In addition, top-end HPC systems that demand high performance are devoting themselves from Ethernet and InfiniBand technologies and are attempting to maximize system performance by introducing their own interconnect networks. In the future, high-performance interconnects are expected to utilize silicon-based optical communication technology to exchange data with light.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.2
• /
• pp.81-89
• /
• 2000

In this thesis. we. present a Telemedicine System that uses the communication network as the 2s6kbps exclusive line or 10Mbps Ethernet LAN. This system can make it possible for remote hospital or doctor to search and retrieve medical images and information from the central hospitals the have advanced technologies, and to support Teleconsulting with medical experts. To solve the speed limits. JPEG compression method and Distributed system used.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.8
• /
• pp.1291-1298
• /
• 2004

In development of monitoring and control systems, one of the most important points is to consider a redundancy so that the system can be operated normally although hardware faults are partly occurred. The purpose of this paper is to introduce a monitoring and control system with a redundancy function for I/O servers and communication networks. I/O servers composed with an active server and a standby server. Each server also has 3 communication ports, 2 ports of them were connected to field units and the other 1 port was connected to the other server. Field units have to be constructed to 2 communication ports connected I/O servers through communication lines. Also, server communication module was implemented for analyzing and handling fault elements. and was submodularized for linking easily with a monitoring and control module. An experiment with 2 servers and 2 field units was constructed to demonstrate its effectiveness.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.3
• /
• pp.65-72
• /
• 2019

HPC(High Performance Computing) is the computing system that connects a number of computing nodes with high performance interconnect network. In the HPC, interconnect network technology is one of the key player to make high performance systems, and mainly, Infiniband or Ethernet are used for interconnect network technology. Nowadays, PCIe interface is main interface within computer system in that host CPU connects high performance peripheral devices through PCIe bridge interface. For connecting between two computing nodes, PCIe Non-Transparent Bridge(NTB) standard can be used, however it basically connects only two hosts with its original standards. To give cost-effective interconnect network interface with PCIe technology, we develop a prototype of interconnect network system with PCIe NTB. In the prototyped system, computing nodes are connected to each other via PCIe NTB interface constructing switchless interconnect network such as ring network. Also, we have implemented prototyped data sharing mechanism on the prototyped interconnect network system. The designed PCIe NTB-based interconnect network system is cost-effective as well as it provides competitive data transferring bandwidth within the interconnect network.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.5 s.335
• /
• pp.23-28
• /
• 2005

Recently, new concept, NP(Network Processor) was emerged into communication systems to cope with the various service requirements from Internet users. NP is an unique promising technique to capable of implementing of the packet processing in wire-speed and providing the flexibility for supporting the newly network services, having satisfied with implementation using hardware and software respectively in past, This paper deals with the implementation techniques and evaluation results of the line card capable to do packet forwarding function with packet processing power of wire-speed and applicable to various physical interfaces. There are several interfaces of POS, Gigabit ethernet and EPON in E-OLT(EPON Optical Line Terminal) system of PATH(Photonic Access To Home) network. Therefore, the E-OLT's packet forwarding engine have to support various subscriber's interface in wire speed. Our system is implemented the subscriber's card in daughter board and the setup procedure is done by system firmware based on the module's identifier acquired from installed physical board.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.115-122
• /
• 2017

Recently, the on-board equipments of vessels are getting diversifications with high technologies. With changing the trends, the shipboard network is turning to the light-weight ethernet architecture for integrated data management. For that necessity, this paper covers a development of the gateway system which gathers and processes the measured analog or NMEA data from loaded equipments to convert the messages based on IEC 61162-450 (standard for light-weight ethernet network of ships) in engine parts of small vessel. To do this, we analyzed the requirements for standardization of ship's equipments and related studies. To solve the problems of existing equipments, we defined the additional data formats (sentence formatter), developed the gateway system, and verified the utility of the developed system. Consequently, we established an interfacing framework for management and application of the generated data based on the ethernet in vessel.