• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4B
• /
• pp.186-191
• /
• 2005

To provide fairness among different ONUs in EPON, the upstream channel remains idle for some time after OLT receives the buffer status from all ONUs every cycle, which decreases the utilization and increases the delay. To solve this deficiency, we present a new grant scheduling method. The method consists of dividing ONUs into several sets where OLT can schedule ONUs in one set while others will be transmitting their traffic. This method will better utilize the bandwidth of EPON. The numerical results show that the larger the number of ONU sets is the smaller the minimum overhead becomes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.271-275
• /
• 2006

In STP, network performance differs depending on topology configuration. Therefore, we need to configure right topology for the optimal efficiency of networking. This paper suggest the optimal topology configuration for efficient networking between ethernet switchs. It finds out the best topology configuration by calculation mathematical model which uses transmission time between root switch and other switchs in the same domain. And it also analysed performance difference on locations of root switch. Through the performance analysis, we could conclude that placing the root switch in the center is the most efficient.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.1 no.2
• /
• pp.137-143
• /
• 1997

From now on, the network is being developed into PSTN(public switched telephone network) and PDN(public data network), that is depend on the form of data. The former one pursues sending voice, and the latter one pursues sending data. But it causes big loss of the economy and efficiency. So, ISDN, processing voice and data at same time, gives a big profit to user. To enlarge the ISDN at the narrow area, it is necessary that study to send the mixture form of voice and data in LAN environment. So, this paper proposes the algorithm about the mixture form of voice and data in ethernet and token-ring. that is widely used in these days.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.615-618
• /
• 2001

In this paper, a solution of network management system for power plant was introduced. In conventional systems, power installations use serial communication or MODEM for Management. In this case, it has a weak point in distance and speed. To solve these problems, the manage system based on Ethernet was developed. In order to implement, SNMP which is standard NMS of LAN was adapted, agent board and manager program for SNMP were developed.

• Journal of Information Processing Systems
• /
• v.13 no.1
• /
• pp.95-103
• /
• 2017

The PCI Express is a widely used system bus technology that connects the processor and the peripheral I/O devices. The PCI Express is nowadays regarded as a de facto standard in system area interconnection network. It has good characteristics in terms of high-speed, low power. In addition, PCI Express is becoming popular interconnection network technology as like Gigabit Ethernet, InfiniBand, and Myrinet which are extensively used in high-performance computing. In this paper, we designed and implemented a evaluation platform for interconnect network using PCI Express between two computing nodes. We make use of the non-transparent bridge (NTB) technology of PCI Express in order to isolate between the two subsystems. We constructed a testbed system and evaluated the performance on the testbed.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1670-1671
• /
• 2007

산업분야의 통신시스템에는 주로 RS232C 통신, RS485 통신, CAN 통신 등이 주로 사용되었다면 근래에는 고속통신이 가능하며 공장 자동화(CIM)나 시스템 통합에 편리한 이더넷통신이 사용되고 있는 추세이다. 즉, 기존의 PC와 프로세서간의 통신의 방식에서 랜 선을 이용하여 원거리에서 프로세서의 제어와 모니터가 가능하도록 구현되는 실정이다. 이더넷을 통해 연결된 시스템은 $10Mbps{\sim}100Mbps$의 빠른 속도로 모니터링과 제어가 가능하여 널리 사용되고 있다. 본 논문에서는 승압형 컨버터를 구현하기 위하여 마이크로프로세서는 컨버터의 입력전압과 출력전압이 필요하며 이를 마이크로프로세서 내부에 있는 12비트A/D변환기로 구현하였다. 전압 제어를 위해서 본 논문에서는 25us 마다 PWM의 ON/OFF 폭을 미리 예측한 후 타이머를 이용하여 A/D 변환을 하도록 하였다. 원 칩 마이크로프로세서인 DSP(TMS320F2812)의 PWM 기능을 이용하여 승압형 컨버터에서 출력되는 전압을 계측하여 PID 제어이론을 바탕으로 전압을 제어하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1672-1673
• /
• 2007

RS-232통신, RS-485통신, CAN통신 등 여러 가지의 통신 규격이 존재하고 있다. 이러한 통신은 하나의 독립된 시스템과 또 다른 시스템간의 데이터 교환 및 모니터링을 위해 사용되고 있다. 현재의 가장 주목 받고 있는 통신 방식은 이더넷 통신이다. 이더넷은 하나하나의 시스템이 거미줄처럼 연결되어 결론적으론 하나의 커다란 묶음으로 묶여있는 시스템이다. 때문에 세계 그 어느 장소든지 이더넷에 연결된 시스템은 지구 반대편의 시스템과도 연결이 가능하다. 이더넷을 통해 연결 된 시스템은 최대 100Mbps의 빠른 속도로 복수 객체의 동시제어가 가능한 이유 등으로 가장 많이 사용되는 추세이다. 본 논문에서는 3상 AC 모터의 속도 제어시스템을 구성하고 이더넷을 통하여 원격제어 및 각 변수의 변화하는 값을 원격 모니터링 하고자 한다.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.2
• /
• pp.131-136
• /
• 2021

EtherCAT is an Ethernet-based fieldbus system standardized in IEC 61158 and SEMI, and widely used in the fields of factory automation, semiconductor equipment and robotics. In this paper, a real-time EtherCAT master is implemented on Linux operating systems and its performances are evaluated. To enhance the real-time capability of mainline Linux kernel, Xenomai is applied as a real-time framework and an open source EtherCAT master stack, Simple Open EtherCAT Master (SOEM), is installed on it. Unlike other studies, the real-time performance of the EtherCAT master is evaluated at the output of the network interface card, so that the evaluation results include all possible effects from the EtherCAT master system. The implemented EtherCAT master can send and receive packets up to 20KHz control frequency with low jitter, even in stressed condition.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.3
• /
• pp.26-32
• /
• 2022

EtherCAT is an Ethernet-based fieldbus system standardized in IEC 61158 and SEMI, and widely used in the fields of factory automation, semiconductor equipment and robotics. In this paper, an EtherCAT master is implemented on an embedded board with Arm based 64-bit quad-core processor and its jitter performance is evaluated at the output of the network interface to include all the effects of the entire system in the results. For the EtherCAT master system, an open source EtherCAT master stack, Simple Open EtherCAT Master (SOEM), is installed on PREEMPT_RT patched Linux operating system for real-time operation. The results show that the jitter performance is comparable to that of Xenomai-based master and the EtherCAT master with two master instances has similar jitter performance to the EtherCAT master with one master instance.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.303-305
• /
• 2002

SSTF(Samsung Superconducting Test Facility) has been constructed at Samsung Advanced Institute of Technology to test the KSTAR(Korea Superconducting Tokamak Advanced Research) superconducting magnets and conductors. The SSTF DAC(Data Acquisition and Control) system basically consists of VME I/O modules, host PCs, and Ethernet links. VxWorks is used for the real-time OS of the VME IOC(Input/output Controller). EPICS (Experimental Physics and Industrial Control System) provides a software architecture for the communication between IOCs and host PCs. For the efficient management of measured data, the database management programs through NFS(Network File System) have been developed and successfully operated. In this paper, the current status of the SSTF DAC system, DBMS(DataBase Management System), recent test results, and future plans are presented.