• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5B
• /
• pp.429-436
• /
• 2011

The G-PON is an efficient solution to implement the FTTH and have GEM frame to accomodate various protocols like Ethernet frames, IP packets, and TDM signals. Above all, the Ethernet is one of the most widely used 2nd layer protocol in the campus, the subscriber access, and the carrier service. So G-PON system has to provide an Ethernet interface with top priority. In this paper, we implement a gigabit Ethernet adapter based on Ethernet over GEM in the ITU-T G.984.3 to accommodate Ethernet protocol in the G-PON TC chip. The adapter maps each Ethernet frame to a single or multiple GEM frames and has several functions including generation of the GEM header, encapsulation of frames and the SAR. In particular, the adapter have converter (LUT) MAC address to port-ID which is a key to identify logical connections though it is not defined in specification but important. We implement the adapter with a FPGA and verify the functions of segmentation and reassembling, MAC address learning, and throughput with the logic analyzer and the Ethernet analyzer.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.1 no.1
• /
• pp.35-46
• /
• 1997

This paper describes a B-ISDN terminal adapter which provides B-ISDN adaptation functions for conventional services such as N-ISDN, video, connectionless data service in the ATM based B-ISDN. These services are provided individually or simultaneously. The B-ISDN terminal adapter offers interfaces of N-ISDN, video codec, Ethernet for supporting conventional services. And it provides various types of services which are available in conventional terminals and networks through B-ISDN. The AAL type 1 is used for N-ISDN and video services, the AAL type 3/4 and 5 are used for LAN service.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.857-864
• /
• 2020

The multi-functional VoIP phone supports the Ethernet protocol in the TIPS(: Tactical IP Switch), which is one of the sub-systems of the tactical information and communication system (TICN). It provides secured voice / video calls in conjunction with VoIP exchanges and supports differential services such as multi-party calls and command functions. In this paper, improving methods have been proposed to reduce power supply defects in the field of multi-functional VoIP phones. The power supply part was improved by applying TVS of the output voltage inlet of the dedicated adapter of the multi-functional VoIP phone, TVS of the PoE module input, adding blocking diodes, and adding DC / DC converters behind the poly-switch. Also, functional and environmental tests were performed to verify the validity of the proposed methods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.654-656
• /
• 2016

MACsec is a cryptographic function that operates on Layer 2. As industries such as IoT(Internet of Things) devices are receiving attention recently are connected to the network and Internet traffic is increasing rapidly. Because of today, Becoming the increase in traffic and complex situations to protect the overall traffic, not just certain parts. The MACsec technology has received attention. In this paper, Layer 2 security technology to MACsec. Design the technology MACsec adapter that can easily and readily added to existing Layer 2 network.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.395-398
• /
• 2004

This paper describes the implementation of an internet-based servo-control system with novel direct internet control architecture which is insensitive to the inherent internet time delay. The servo control system can be controlled by using a PC provided at a local site. However, a large internet time delay may make some control inputs distorted. Moreover, since it is acted by the number of the internet nodes and loads, this delay is variable and unpredictable. This system consists of servo mechanism and Ethernet control adapter. Intention of this paper is to reduce the expenses, to manage effectively for plant and to increase the productivity through linking each plant of several factories by TCP/IP and Ethernet, and then many control plants and manager minimize the needed work. Experiments are partially fulfilled using the Labview and Matlab.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.5_6
• /
• pp.371-378
• /
• 2004

This paper presents the implementation and performance of the HVIA-GE card, which is a hardware implementation of the Virtual Interface Architecture (VIA) based on Gigabit Ethernet. The HVIA-GE card is a 32-bit/33MHz PCI adapter containing an FPGA for the VIA protocol engine and a Gigabit Ethernet chip set to construct a high performance physical network. HVIA-GE performs virtual-to-physical address translation, Doorbell, and send/receive completion operations in hardware without kernel intervention. In particular, the Address Translation Table (ATT) is stored on the local memory of the HVIA-GE card, and the VIA protocol engine efficiently controls the address translation process by directly accessing the ATT. As a result, the communication overhead during send/receive transactions is greatly reduced. Our experimental results show the maximum bandwidth of 93.7MB/s and the minimum latency of 11.9${\mu}\textrm{s}$. In terms of minimum latency HVIA-GE performs 4.8 times and 9.9 times faster than M-VIA and TCP/IP, respectively, over Gigabit Ethernet. In addition, the maximum bandwidth of HVIA-GE is 50.4% and 65% higher than M-VIA and TCP/IP respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.972-978
• /
• 2016

MACsec is a cryptographic function that operates on Layer 2, the international standard defined in the IEEE 802.1AE. As industries such as IoT(Internet of Things) devices are receiving attention recently are connected to the network and Internet traffic is increasing rapidly, and is exposed to the risk of a variety of Internet attacks. Traditional network security technologies were often made in Layer 3, such as IPsec. However, to be increased as rapidly as the current traffic situation is complicated, and became interested in the security function of protecting the entire traffic instead of for a specific application or protocol. It appeared as these technologies is technology MACsec technology to protect all traffic in Layer 2. In this paper, we propose a Layer 2 security technology adapter MACsec MACsec a technology that allows you to simply and easily add them to the existing Layer 2 networks.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.78.2-78.2
• /
• 2019

The temperature control of a scientific device is essential because extreme temperature conditions can cause hazard issues for the operation. We developed a software which can interact with the temperature sensor using the GMT SDK(Giant Magellan Telescope Software Development Kit) version 1.6.0. The temperature sensor interacts with the EtherCAT(Ethernet for Control Automation Technology) slave via the hardware adapter, sending and receiving data by a packet. The PDO(Process Data Object) and SDO(Service Data Object), which are the packet interacts with each EtherCAT slave, are defined on the TwinCAT program that enables the real-time control of the devices. The user can receive data from the device via grs(GMT Runtime System) tools and log service. Besides, we programmed the software to print an alert message on the log when the temperature condition changes to certain conditions.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.11_12
• /
• pp.557-565
• /
• 2005

This paper presents the development and implementation of a zero-copy file transfer mechanism that improves the efficiency of file transfers for PC cluster systems using hardware-based VIA(Virtual Interface Architecture) network adapters. VIA is one of the representative user-level communication interfaces, but because there is no library for file transfer, one copy occurs between kernel buffer and user boilers. Our mechanism presents a file transfer primitive that does not require the file system to be modified and allows the NIC to transfer data from the kernel buffer to the remote node directly without copying. To do this, we have developed a hardware-based VIA network adapter, which supports the PCI 64bit/66MHz bus and Gigabit Ethernet, as a NIC, and implemented a zero-copy file transfer mechanism. The experimental results show that the overhead of data coy and context switching in the sender is greatly reduced and the CPU utilization of the sender is reduced to $30\%\~40\%$ of the VIA send/receive mechanism. We demonstrate the performance of the zero-copy file transfer mechanism experimentally. and compare the results with those from existing file transfer mechanisms.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.7
• /
• pp.413-420
• /
• 2006

The speed of present-day network technology exceeds a gigabit and is developing rapidly. When using TCP/IP in these high-speed networks, a high load is incurred in processing TCP/IP protocol in a host CPU. To solve this problem, research has been carried out into TCP/IP Offload Engine (TOE). The TOE processes TCP/IP on a network adapter instead of using a host CPU; this reduces the processing burden on the host CPU. In this paper, we developed two software-based TOEs. One is the TOE implementation using an embedded Linux. The other is the TOE implementation using Lightweight TCP/IP (lwIP). The TOE using an embedded Linux did not have the bandwidth more than 62Mbps. To overcome the poor performance of the TOE using an embedded Linux, we ported the lwIP to the embedded system and enhanced the lwIP for the high performance. We eliminated the memory copy overhead of the lwIP. We added a delayed ACK and a TCP Segmentation Offload (TSO) features to the lwIP and modified the default parameters of the lwIP for large data transfer. With the aid of these modifications, the TOE using the modified lwIP shows a bandwidth of 194 Mbps.