• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.1
• /
• pp.82-90
• /
• 2007

We introduce the concept of a remote distributed embedded system to integrated fieldbus based control systems in internet/Intranet. As a result, fieldbus systems are opened up for remote monitoring, remote maintenance, and remote control applications using state of the art Web-technology. This paper addresses the design of a remote distributed embedded system using Internet and CAN for multi-induction motor of Building and Industrial field. The fieldbus used the CAN based networked intelligent multi-motor control system using DSP2812 microprocessor. To build a remote distributed embedded system, the TCP/IP-CAN Gateway which converts a CAN protocol to TCP/IP protocol and vice verse, was designed. A experimental simulation system consists of a TCP/IP-CAN gateway in remote place and a command PC to be connected to Ethernet.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2386-2388
• /
• 2004

Recently, rapid process of network technology has an effect on the field of control engineering. And it gives effect to network control system(NCS) research that grafts existing control system and network has been studied. According to one-chip development of TCP/IP that is the most useful in LAN server for hardware, it can usefully and conveniently apply to network control system before. This paper construct network control system that can work close-loop control takes advantage of Ethernet that is the most for general data transmission network. Here, protocol uses for data transmission makes use for TCP/IP. This work the basic data transmitter-receive experiment to take advantage of network node was produced. And then, DC-motor can be control plant. Finally, I will prove to build speed control system of multiple DC-motor through Ethernet.

• Journal of Digital Convergence
• /
• v.13 no.10
• /
• pp.263-269
• /
• 2015

This paper suggest remote control technic using TCP/IP protocol network after UART serial communication implemented through RS-232 cable to ethernet module. This is multidisplinary signal technique which is PC signal is converted to internet communication signal. Ethernet module is WIZ1000SR. This is gate module which convert RS-232 protocol to TCP/IP protocol. This module convert serial data transmitted serial device to TCP/IP type data, in contrast TCP/IP data received through network converted to serial data transmitted to serial device. This paper propose that the lower subnet internet layer UDP module make the higher speed in control board than TCP/IP signal.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.12
• /
• pp.3634-3641
• /
• 1999

LAN Emulation and IPOA are the two most widei y accepted network protocols which allow to provide conventional LAN-based data services on ATM LAN environment. In this paper, the performance of IPOA and LAN Emulation on ATM LAN testbed is compared and the results are compared with performance of Ethernet as well. For performance comparison, metrics such as application throughput, latency, CPU usage are used. In addition, a network program that uses the socket based TCP/IP application programming interface to send large data files from client to server via ATM LAN switch is developed. IPOA provides lower latency and higher throughput than LAN Emulation while LAN Emulation consumes more CPU usage.

• Convergence Security Journal
• /
• v.7 no.4
• /
• pp.1-8
• /
• 2007

Currently, the needs of open standard and integrated network, and also applications of Ethernet network based system are increasing. By applying and expanding TCP/IP based network technology from high to low control level, factory automation application has been implemented, and thus integrated factory automation system has been accomplished, which is directly interoperable between high level management program and DB system. This paper proposes a communication control device which is based on Ethernet/IP standard system for factory automation. The proposed system is workable in the environment of a network system, which is based on CIP standard interface technology. The proposed system can also contribute to improve data communication characteristics.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.4
• /
• pp.636-642
• /
• 2008

Upon the changes of human life style due to the distribution of ultra-high speed internet services and the development of high-tech information equipment, the idea of necessity fer home networking has been widely accepted. Thus, "embedded ethernet module" was designed in this paper for the stabilization of home networking by using 8051 MCU, Hardwired TCP/IP (W3150A). By executing remote software on established simple web-server on the target machine, controlling electric equipment became available elsewhere. With this module, establishing a low-cost home automations system would become possible in a ubiquitous society.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.165-168
• /
• 2002

This paper has been studied about the real time monitoring system development using TCP/IP ethernet and RS-422 serial communication link in general communication methods that rocket fire control agents could be monitoring about real time Rocket fire event procedures and be managing total rocket fire courses. Also, this paper has been studied the HMI(Human Machine Interface) control program and algorithm that guarantee confidential control for the Fire Display System.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.1
• /
• pp.63-69
• /
• 2006

Problems like poor security, transfer delay or packet loss occur while building network systems that are applied with TCP/TP integrate with data network systems. To solve this problem, this paper proposes the Separated Ethernet, which can give priority to the system, and by using the OPNET Modeler simulator, we will verify its performances.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.275-278
• /
• 2000

Recently ATM(Asynchronous Transfer Mode) technology is facing challenges from Integrated Service IP(Internet Protocol), IP router, Gigabit Ethernet. Although ATM is approved by ITU-T as the standard technology in B-ISDN, its survival is still in question. In the ATM networks, the Guaranteed Frame Rate(GFR) service has been designed to accommodate non-real-time applications, such as TCP(Transmission Control Protocol)/IP based traffic. The GFR service not only guarantees a minimum throughput at the frame level, but also supports a fairshare of available resources. We have studied different discarding and scheduling schemes, and compared their throughput and fairness when TCP/IP Traffic is carried. Through simulations, we know that only per-VC queueing with weighted Round Robin(WRR) can guarantee Minimum Cell Rate Among all the Schemes that have been experimented, we recommend DT-EPD(Dynamic Threshold-Early Packet Discard) integrated with MCRplus(Minimum Cell Rate) to support the GFR service.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.437-440
• /
• 2003

Recently, the study on the design of NCS(Network Control System) using Ethernet is being rapidly progressed. NCS can be extensively applied in manufacturing automation, office automation, home automation, remote control and ect. A merit of NCS on based Ethernet is to make good use of advanced Internet environment and to apply a application of abundant TCP/IP upper layer to NCS. The purpose of this paper is to control a speed of DC-motor using NCS on based Ethernet. The control system is divided into a server part and a client part. A server transfers a value of reference speed of a DC-motor. A client receives a output signal of DC-motor and a reference input obtained from the server. A client computes a error of two signals and then makes a control input. The control input is transferred to a actuator In this pater, A controller uses a classical control using a general feedback. In this paper, a viewpoint is to compare performance of NCS with performance of a classical control and to analyze the cause of that.