• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1367-1372
• /
• 2010

Copoly(ether-ether-ester)s having flexible side chain were synthesized by polycondensation. Intrinsic viscosities of polymers were between 0.42 and 0.78dl/g in tetrachloroethane. The polymer structures were investigated by $^1H$-NMR and FT-IR, and thermal and liquid crystalline properties of polymers were measured by DSC, TGA, POM and XRD. As results of investigations, synthetic copolymers exhibited lower melting temperature than homopolymers. When the biphenylene units contents in copolymer were more than 60 mol %, nematic mesophase was observed, and the mesophase of synthetic polymers was dependent upon biphenylene content.

• Composites Research
• /
• v.12 no.6
• /
• pp.15-21
• /
• 1999

Carbon fibers were coated with carboxy modified poly(hydroxy ether)(C-PHE, water dispersed), water soluble polymers poly(hydroxy ether ethanol amine)(PHEA) or water insoluble poly(hydroxy ether)(PHE). Interfacial shear strength of polymer coated carbon fibers was measured by micro-droplet tests with vinyl ester resin, and approximately 30 samples were tested. The interfacial adhesion of poly-mers to carbon fibers was also evaluated, and diffusion behavior of polymer films in vinyl ester resin was investigated. The carbon fibers after testing and diffusion samples were analysed by SEM in order to understand adhesion mechanism. Interfacial shear strength of carbon fibers was enhanced by the coating of PHE and C-PHE which have good or marginal solubility in vinyl ester resin, respectively, but not by the coating of PHEA possibly due to the poor solubility in vinyl ester resin.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3060-3065
• /
• 2009

A series of wholly aromatic Poly(ether-ether-ester)s with flexible side chain was synthesized by direct polycondensation from ether linkaged triad diol and 2,5-dialkoxyterephthalic acid. The chemical structures and physical properties of these polymers were investigated by using $^1H$-NMR, FT-IR, DSC and TGA. As results of investigations, the inherent viscosities($\eta$inh) measured at $40^{\circ}C$ in 1,1,2,2-tetrachloroethane(TCE) were 0.45~0.86 dl/g and initial decomposition(Td) in TGA occurred at 378~418 $^{\circ}C$ in N2 gas. The majority of these polymers were soluble in organic solvents used in this experiments at elevated temperatures. Melting temperatures(Tm) decreased with increasing the length of the side chain and showed odd-even effects.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.6
• /
• pp.1033-1038
• /
• 1997

Antioxidant effect of several antioxidative components on the high purity $\alpha$-linolenic acid(HALA; ALA, 78.1%) ethyl ester concentrated from perilla oil were investigated by measuring weight-gains and peroxide value(POV) during storage at 5$0^{\circ}C$, 23$^{\circ}C$ and 4$^{\circ}C$. Amounts of antioxidant components were 0.2g/kg HALA ethyl ester for sesamin, sesangolin and butylated hydroxytolune(BHT), and 0.1g/kg for sesamol and 100g/kg for ether extracts from perilla seed. The oxidative stability of HALA ethyl ester was particularly increased by adding sesamol, ether extracts and BHT, but sesamin and sesangolin scarcely showed an antioxidant effect. POV on the HALA ethyl ester added sesamol and ether extract was less than 15.0meq/kg by 9 weeks of storage at 23$^{\circ}C$. However, in the case of low temperature storage at 4$^{\circ}C$, all the samples estimated showed less than 7.0meq/kg in POV by 5 months. Consequently, sesamol and ether extracts were recognized as available antioxidant components on the HALA ethyl ester from perilla oil.

• Fibers and Polymers
• /
• v.3 no.3
• /
• pp.91-96
• /
• 2002

Polyhydroxyamides derivatized with trifluorormethyl ether and trifluoromethyl ester groups were investigated as possible candidates for a new flame retardant polymer. Model compounds for these derivatized polyhydroxyamides were synthesized and their cyclization chemistry was investigated. The model compound study revealed that trifluorornethyl ester group containing model compounds can cyclize on heating, while trifluoromethyl ether group containing model compounds cannot. The non-fluorinated ether and ether derivatives behaved similarly. The trifluoromethyl ester derivatized polyhydroxyamides were synthesized according to the procedures for the model compounds. TGA characterization revealed that the fluorinated polymers have nearly same thermal stability as the underivatized PHA after cyclization.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.32-35
• /
• 1999

Poly(arylene ether phosphin oxide) (PEPO), Udel$^{\circledR}$ P-1700, Ultem$^{\circledR}$ 1000. poly(hydroxy ether) (PHE), carboxy modified poly(hydroxy ether)(C-PHE) and poly(hydroxy ether ethanol amine) (PHEA) were utilized for a coating of carbon fibers. Interfacial shear strength(IFSS) of polymers to carbon fibers was also evaluated in order to understand the adhesion mechanism. IFSS was measured via micro-droplet tests, and failure surfaces were analyzed by SEM. Diffusion between polymer and vinyl ester resin was investigated as a function of styrene content; 33. 40 or 50wt.% and the solubility parameters of polymers were calculated. The results were correlated to the interfacial shear strength. The highly enhanced interfacial shear strength (IFSS) was obtained with PEPO coating, and marginally improved IFSS with PHE, Udel$^{\circledR}$ and C-PHE coatings, but no improvement with PHEA and Ultem$^{\circledR}$ coatings.

• Polymer(Korea)
• /
• v.25 no.3
• /
• pp.385-390
• /
• 2001

The A-B-A type block copoly(ester-ether)s consisting of poly(L-lactic acid) (PLLA)(A) and poly(oxyethylene-co-oxypropylene)(B) were prepared to improve the mechanical properties and hydrolyzability of PLLA. The block copolymers showed an improved flexibility due to the incorporation of the soft segments. Then, the same copolymer has an improved anti-thrombogenicity probably due to the specific microphase separation structure in the surface. The AFM of the film of the block copolymer revealed that the surface was quite flat in comparison with that of PLLA. Therefore, the flatness of the surface may be related with the increased anti-thrombogenicity of the copolymer film.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.974-978
• /
• 1999

This study was concerned with the scouring effect of anionic surfactants, PAPE(sodium polyoxyethylene alkyl phosphoric ester) for cotton fibres. Sodium polyoxyethylene(7) nonylphenyl phosphoric ester(CPB-1) and the sodium polyoxyethylene(7) tridecyl phosphoric ester(CPB-2) were synthesized by the phosphoric esterification reaction from NP-7(polyoxyethylene(7) nonylphenyl ether) and TDA-7(polyoxyethylene(7) tridecyl ether) as scouring agents. Defoaming ability, fibre wetting time and absorbency rate of scouring agents were investigated. Being compared with the conventional scouring agent(Ultravon GP; Ciba-guyge Co.), CPB-1 and CPB-2 showed a higher defoaming ability in the cotton scouring process at room temperature. And CPB-1 has a higher wetting effect than the agents, CPB-2 or GP in distilled water bath but CPB-2 showed more scouring effect in 1.2 wt % NaOH solution bath.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.1
• /
• pp.119-124
• /
• 2001

Dimethyl terephthalate (DMT). 1.4-butanediol (1.4-BD) and poly (tetramethylene ether) glycol (PTMG) in the molecular weight of 2000 (g/mol) were used to synthesize poly(ether-b-ester) thermoplastic elastomers (TPEEs). The final copolymers were annealed to improve thermal stability at elevated temperatures and mechanical properties. This study showed that as the proportion of soft segment increases melting temperature and degree of crystallinity of TPEEs decrease constantly. In case of mechanical properties like flexural strength and flexural elastic modulus. $35-PTMG^{2000}$ indicates the highest values due to more efficient physical interlock.

• Applied Biological Chemistry
• /
• v.50 no.3
• /
• pp.178-186
• /
• 2007

42 compounds such as ester, sulfonyl ester, phosphoyl ester and ether derivatives of 4-isopropylphenol (I) and 2-isopropylphenol (II) were synthesized. These derivatives were identified by IR, GC/MS and $^{1}H-NMR$ spectra. Their in vitro antifungal activities were tested against 10 plant pathogenic fungi. Among them, several compounds showed potent in vitro antifungal activity. The selected compounds showing potent in vitro antifungal activity were tested for their in vivo antifungal acitvities against 5 plant diseases such as rice blast, rice sheath blast, cucumber anthracnose, cucumber gray mold and tomato late blight. As a result, 2-isopropylphenyl piperonyloate (II-7a) showed a potent in vivo antifungal activity against cucumber anthracnose and tomato late blight, 4-isopropylphenyl 4-methoxybenzenesulfonate (I-6b) effectively inhibited the development of rice blast.