• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.203-206
• /
• 2004

For the realization of PRAM, $Ge_2Sb_2Te_5$ (GST) has been employed for the phase transition between the crystal and amorphous states by electrical joule heating. Although there has been a vast amount of results concerning the GST in material aspect for the laser-induced optical storage disc applications, the process-related issues of GST for the PRAM applications have not been reported. In this work, the etching behaviors of GST were investigated when the processing conditions were varied in the high-density helicon plasma. The etching parameters of RF main power, RF bias power, and chamber pressure were fixed at 600 W, 150 W, and 5 mTorr, respectively. For the etching processes, gas mixtures of $Ar/Cl_2$, $Ar/CF_4$, and $Ar/CHF_3$ were employed, in which the etching rates and etching selectivities of GST thin film in given gas mixtures were evaluated. From obtained results, it is found that we can arbitrarily design the etching process according to given cell structures and material combinations for PRAM cell fabrications.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.390-390
• /
• 2012

Information technology industries has grown rapidly and demanded alternative memories for the next generation. The most popular random access memory, dynamic random-access memory (DRAM), has many advantages as a memory, but it could not meet the demands from the current of developed industries. One of highlighted alternative memories is magnetic random-access memory (MRAM). It has many advantages like low power consumption, huge storage, high operating speed, and non-volatile properties. MRAM consists of magnetic-tunnel-junction (MTJ) stack which is a key part of it and has various magnetic thin films like CoFeB, FePt, IrMn, and so on. Each magnetic thin film is difficult to be etched without any damages and react with chemical species in plasma. For improving the etching process, a high density plasma etching process was employed. Moreover, the previous etching gases were highly corrosive and dangerous. Therefore, the safety etching gases are needed to be developed. In this research, the etch characteristics of CoFeB magnetic thin films were studied by using an inductively coupled plasma reactive ion etching in $CH_4/O_2/Ar$ gas mixes. TiN thin films were used as a hardmask on CoFeB thin films. The concentrations of $O_2$ in $CH_4/O_2/Ar$ gas mix were varied, and then, the rf coil power, gas pressure, and dc-bias voltage. The etch rates and the selectivity were obtained by a surface profiler and the etch profiles were observed by a field emission scanning electron microscopy. X-ray photoelectron spectroscopy was employed to reveal the etch mechanism.

• 한국재료학회지
• /
• 제10권6호
• /
• pp.450-455
• /
• 2000

실리콘 소자가 더욱 미세화되면서, 발생되는 power consumption, crosstalk와 interconnection delay 등을 감소시키기 위해 $SiO_2$ 대신에 저유전 상수막의 적용이 고려되어진다. 본 논문에서는, 저유전 상수 층간 절연막 재료로 유망한 폴리이미드의 식각 특성에 $O_2/SF_6$ 가스가 미치는 영향을 연구하였다. 폴리이미드의 식각률을 SF(sub)6 가스의 첨가에 따라 산소와 hydrocarbon 폴리머 간의 반응을 억제하는 비휘발성 물질은 fluorine 화합물의 형성에 의해 감소되었다. 반면에, 기판 전극의 전압 증가는 물리적인 충격을 통해 식각 공정을 증가시켰다. 또한 작은 량의 SF(sub)6 가스 첨가는 식각 topography에 바람직하였다. 폴리이미드 식각을 위한 $SiO_2$ hard mask 사용은 산소 플라즈마 식각 하에서 효과적이었다(선택비-30). 반면에 $O_2SF_6$ 가스 조성은 식각 선택비를 4로 저하시키게 되었다. 이러한 결과를 기초로, $1-2\mu\textrm{m}$ 선폭을 가진 PI 2610의 식각을 원활히 수행할 수 있었다.

• Composites Research
• /
• 제34권6호
• /
• pp.387-393
• /
• 2021

본 논문에서는 습식 식각으로 제작된 구리 전극을 가진 다중벽 탄소나노튜브 PDMS 복합재료 변형율 센서의 전기적 특성을 고찰하였다. MWCNT의 질량분율에 따라 MWCNT-PDMS 변형율 센서를 제작한 후, 전극 부착 표면을 습식 식각한 후 은-에폭시 전도성 접착제를 이용하여 구리 박판을 부착하였다. 2-프로브 방법으로 변형율 센서의 전기 전도성을 측정한 결과, 초기 저항은 MWCNT 함량과 식각 시간에 반비례하였지만 30% 변형율에 대한 저항 변화율은 MWCNT 함량과식각 시간에 비례하였다. 100회 반복 하중 시험 후 저항 변형율 감소는 MWCNT 함량이 증가할수록 식각 시간이 짧아질수록 상대적으로 작게 나타났다. 이는 식각에 의해 MWCNT-PDMS 변형율 센서의 초기 저항 감소에 기인한 것으로 판단된다.

• 센서학회지
• /
• 제7권6호
• /
• pp.426-431
• /
• 1998

본 논문에서는 THAH/IPA/pyrazine 용액에서의 전기화학적 식각정지특성을 기술한다. THAH/IPA/pyrazine 용액에서의 n-형과 p-형의 Si에 대한 I-V 곡선이 얻어졌다. p-형 Si에 대한 OCP(개방회로전압)과 PP(보호막생성 전압)은 각각 -1.2 V와 0.1 V이고, n-형에 대해서는 -1.3 V와 -0.2 V로 각각 나타났다. p-형과 n-형 Si 모두 PP점보다 양의 전압에서 식각율이 급속히 감소하였다. 또한 THAH/IPA/pyrazine 용액에서의 식각정지특성을 관찰하였다. pn 접합부에서의 정확한 식각정지에 의해서 epi. 층의 두께에 상응하는 Si 다이어프램을 제작할 수 있었다. 최적 이방성 식각조건인 TMAH 25 wt.%/IPA 17 vol.%/pyrazine 0.1g/100ml에서 식각률이 가장 높기 때문에 식각소요시간이 크게 감소하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.391-392
• /
• 2012

In these days, the desire for the precise and tiny displays in mobile application has been increased strongly. Currently, laser displays ranging from large-size laser TV to mobile projectors, are commercially available or due to appear on the market [1]. In order to achieve a mobile projectors, the semiconductor laser diodes should be used as a laser source due to their size and weight. In this presentation, the continuous etch characteristics of Pd and AlGaN/GaN superlattice for the fabrication of blue laser diodes were investigated by using inductively coupled $CHF_3$ and $Cl_2$ -based plasma. The GaN laser diode samples were grown on the sapphire (0001) substrate using a metal organic chemical vapor deposition system. A Si-doped GaN layer was grown on the substrate, followed by growth of LD structures, including the active layers of InGaN/GaN quantum well and barriers layer, as shown in other literature [2], and the palladium was used as a p-type ohmic contact metal. The etch rate of AlGaN/GaN superlattice (2.5/2.5 nm for 100 periods) and n-GaN by using $Cl_2$ (90%)/Ar (10%) and $Cl_2$ (50%)/$CHF_3$ (50%) plasma chemistry, respectively. While when the $Cl_2$/Ar plasma were used, the etch rate of AlGaN/GaN superlattice shows a similar etch rate as that of n-GaN, the $Cl_2/CHF_3$ plasma shows decreased etch rate, compared with that of $Cl_2$/Ar plasma, especially for AlGaN/GaN superlattice. Furthermore, it was also found that the Pd which is deposited on top of the superlattice couldn't be etched with $Cl_2$/Ar plasma. It was indicating that the etching step should be separated into 2 steps for the Pd etching and the superlattice etching, respectively. The etched surface of stacked Pd/superlattice as a result of 2-step etching process including Pd etching ($Cl_2/CHF_3$) and SLs ($Cl_2$/Ar) etching, respectively. EDX results shows that the etched surface is a GaN waveguide free from the Al, indicating the SLs were fully removed by etching. Furthermore, the optical and electrical properties will be also investigated in this presentation. In summary, Pd/AlGaN/GaN SLs were successfully etched exploiting noble 2-step etching processes.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.145-145
• /
• 2008

High-k materials have been paid much more attention for their characteristics with high permittivity to reduce the leakage current through the scaled gate oxide. Among the high-k materials, $ZrO_2$ is one of the most attractive ones combing such favorable properties as a high dielectric constant (k= 20 ~ 25), wide band gap (5 ~ 7 eV) as well as a close thermal expansion coefficient with Si that results in good thermal stability of the $ZrO_2$/Si structure. During the etching process, plasma etching has been widely used to define fine-line patterns, selectively remove materials over topography, planarize surfaces, and trip photoresist. About the high-k materials etching, the relation between the etch characteristics of high-k dielectric materials and plasma properties is required to be studied more to match standard processing procedure with low damaged removal process. Among several etching techniques, we chose the inductively coupled plasma (ICP) for high-density plasma, easy control of ion energy and flux, low ownership and simple structure. And the $BCl_3$ was included in the gas due to the effective extraction of oxygen in the form of $BCl_xO_y$ compounds. During the etching process, the wafer surface temperature is an important parameter, until now, there is less study on temperature parameter. In this study, the etch mechanism of $ZrO_2$ thin film was investigated in function of $Cl_2$ addition to $BCl_3$/Ar gas mixture ratio, RF power and DC-bias power based on substrate temperature increased from $10^{\circ}C$ to $80^{\circ}C$. The variations of relative volume densities for the particles were measured with optical emission spectroscopy (OES). The surface imagination was measured by scanning emission spectroscope (SEM). The chemical state of film was investigated using energy dispersive X-ray (EDX).

• 마이크로전자및패키징학회지
• /
• 제19권1호
• /
• pp.39-45
• /
• 2012

Cu-Cu 패턴의 직접접합 공정을 위하여 Buffered Oxide Etch(BOE) 및 Hydrofluoric acid(HF)의 습식 조건에 따른 Cu와 $SiO_2$의 식각 특성에 대한 평가를 수행하였다. 접촉식 3차원측정기(3D-Profiler)를 이용하여 Cu와 $SiO_2$의 단차 및 Chemical Mechanical Polishing(CMP)에 의한 Cu의 dishing된 정도를 분석 하였다. 실험 결과 BOE 및 HF 습식 식각 시간이 증가함에 따라 단차가 증가 하였고, BOE가 HF보다 더 식각 속도가 빠른 것을 확인하였다. BOE 및 HF 습식 식각 후 Cu의 dishing도 식각시간 증가에 따라 감소하였다. 식각 후 산화막 유무를 알아보기 위해 Cu표면을 X-선 광전자 분광법(X-ray Photoelectron Spectroscopy, XPS)를 이용하여 분석 한 결과 HF습식 식각 후 BOE습식 식각보다 Cu표면산화막이 상대적으로 더 얇아 진 것을 확인하였다.

• 한국정밀공학회지
• /
• 제19권7호
• /
• pp.51-58
• /
• 2002

In this paper, the characteristics of silicon wafer surface which is textured by KOH anisotropic etching method and mechanical polishing are investigated from the viewpoint of stiction and friction. It was found that the characteristics of stiction and friction of each textured surface are dependent on the contact area characterized by surface parameters such as bearing length ratio and peak count. To find the mechanism of the variation of stiction and friction in textured surface, OTS SAM coated wafer was used. In this case, the variation of stiction and friction was diminished, Therefore, it is concluded that the reason of variation of stiction and friction on textured surface is mainly caused by capillary which in turn is affected by the surface topography

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.148-152
• /
• 2001

One set of MMIC library has been developed using gate recess etching by spin processor. It is superior than that of dipping Method in the uniformity and the reproducibility of gate recess. A DC characteristics of p-HEMT have a uniform characteristics in the whole wafer than that of dipping method. The low noise p-HEMT with the $0.6{\mu}m$ and $200{\mu}m$ of gate length and gate width, respectivily, has a uniform characteristics of Idss 130~145 mA, conductances 190~220mS/nm, and threshold voltage -0.7~-1.1V in the drain voltage of 2V.