• 대한기계학회논문집B
• /
• 제28권10호
• /
• pp.1155-1162
• /
• 2004

This paper is the forth paper of several companion papers which compare the method of Air-Fuel ratio determination. In the previous work, various AFR calculations were performed for various fuels and the results were compared with each other. The comparison, however, were limited to numerical value and estimation of each equation or method was insufficient. In this paper, the overall estimation of the methods was attempted. Also, the method of trouble shooting of instrumentation was presented. Through the estimation of methods, it is concluded that the Eltinge method contains inherently the most perfect thermal dissociation model as far as the exhaust composition is concerned; therefore, this might be regarded as the most general equation of AFR determination among the existing ones. The others might be considered as approximate form. In addition, the mal-distribution factor in Eltinge method is qualitatively equivalent to thermal dissociation chemical equilibrium constant K. Lastly, it is illustrated that all instrumentation error, including the sampling line leakage, can be easily detected through the analyzing the exhaust component on the Eltinge chart.

• 한국건축시공학회지
• /
• 제7권1호
• /
• pp.71-77
• /
• 2007

This paper is to investigate the effect of the curing temperature on strength development of concrete incorporating cement kiln dust(CKD) and blast furnace slag (BS) quantitatively. Estimation of the compressive strength of the concrete was conducted using the equivalent age equation and the rate constant model proposed by Carino. Correction of Carino model was studied to secure the accuracy of strength development estimation by introducing correction factors regarding rate constant and age. An increasing curing temperature results in an increase in strength at early age, but with the elapse of age, strength development at high curing temperature decreases compared with that at low curing temperature. Especially, the use of BS has a remarkable strength development at early age and even at later age, high strength is maintained due to accelerated pozzolanic activity resulting from high temperature. Whereas, at low curing temperature, the use of BS leads to a decrease in compressive strength. Accordingly, much attention should be paid to prevent strength loss at low temperature. Based on the strength development estimation using equivalent age equation, good agreements between measured strength and calculated strength are obtained.

• 대한공업교육학회지
• /
• 제34권2호
• /
• pp.396-410
• /
• 2009

이 논문은 산업용 로봇의 모델링을 할 때 일어나는 불확실성을 측정하여, 이 불확실성이 야기하는 비선형 문제를 해결하는 데 필요한 정보를 얻는 데 목적이 있다. 우선 주어진 로봇모델에서 수학적 운동방정식을 유도하고, 불학실성의 물리적 현실에 가능한 가상모델을 접목하여 수학적 확장 모델을 세우고, 이를 바탕으로 불확실성을 측정 할 수 있는 관측자를 설계한다. 이 불확실성에는 모델링을 하기 어려운 모델링 오차, 중력, 마찰, 질량의 불균일 분포, 코리오리스 힘이 포함된다. 관측자와 관련된 조건들을 관측가능성 및 수렴 관계를 분석한다.

• 제어로봇시스템학회논문지
• /
• 제8권1호
• /
• pp.37-45
• /
• 2002

A method of measuring the length of defects on the wall and restructuring the defect image is proposed based on the estimation algorithm of a camera orientation, which uses the declination angle of a laser slit beam. The estimation algorithm of the horizontally inclined angle of CCD camera adopts a 3-dimensional coordinate transformation of the image plane where both the laser beam and the original image of the defects exist. The estimation equation is obtained by using the information of the beam projected on the wall and the parameters of this equation are experimentally obtained. With this algorithm, the original image of the defect can be reconstructed as an image normal to the wall. From the result of a series of experiments, the measuring accuracy of the defect is measured within 0.5% error bound of real defect size under 30 degree of the horizontally inclined angle. The proposed algorithm provides the method of reconstructing the image taken at any arbitrary horizontally inclined angle as the image normal as the wall and thus, it enables the accurate measurement of the defect lengths by using a single camera and a laser slit beam.

• 대한수학회지
• /
• 제44권3호
• /
• pp.585-603
• /
• 2007

The author studies the local $H\ddot{o}lder$ convergence of the solution to an evolution equation of p-Ginzburg-Landau type, to the heat flow of the p-harmonic map, when the parameter tends to zero. The convergence is derived by establishing a uniform gradient estimation for the solution of the regularized equation.

• 호남수학학술지
• /
• 제32권2호
• /
• pp.193-202
• /
• 2010

We investigate the estimation of the moisture transfer coefficients in porous media by optimization technique which minimizes the functional defined by the squares error of the numerical solution of an inverse diffusion problem from their experimental values of the moisture content at the some time-steps. In this paper, we solve a diffusion equation numerically by the control volume finite element methods.

• 소성∙가공
• /
• 제8권5호
• /
• pp.520-526
• /
• 1999

In this study a practical formula based on the experime수 랙 the estimation of load in the non-circular tube extrusion with the mandrel is proposed by using the effective extrusion ratio. Through some experiments for the several shaped sections, the coefficients of the empirical equation are determined by ticine as a model material at room temperature. The proposed empirical formula for the estimation of extrusion load will be applicable to the non-steady state as well as steady state for the extrusion of various shaped tubes from hollow billets.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제1권1호
• /
• pp.83-104
• /
• 1997

This paper studies parameter estimation for a first-order hyperbolic integro-differential equation modelling one-sex population dynamics. A second-order finite difference scheme is used to estimate parameters such as the age-specific death-rate and the age-specific fertility from fully discrete observations on the population. The function space parameter estimation convergence of this scheme is proved. Also, numerical simulations are performed.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제22권6호
• /
• pp.29-36
• /
• 2017

Universal soil loss equation (USLE) has been frequently employed to estimate potential soil loss in land since it was developed based on the statewide data measured and collected in the United States. The equation is an empirical model mainly used for U.S. soil, thus it has been recently modified to reflect Korean soil conditions and named as Korean Soil Loss Equation (KORSLE). The modified equation was implemented in ArcGIS software, and used for estimation of potential soil loss from 2003 to 2016 in the thirty-eight Water Protection Districts. Five out of the thirty-eight districts were identified as the area of potential soil erosion most severly. In those five districts, potential soil erosion were estimated to be more than 50 Mg/ha/year that requires site investigation under supervision of the Korean Ministry of Environment. Distinctive site characteristics were found in the potential soil loss estimation such that the districts of low potential soil loss had low five factors in the aggregate. However, if one of more factors are dominantly large, the potential soil loss significantly increased. This study provides a useful tool to identify the potential areas for soil erosion and the important factors that play an important role in the estimation process.

• 한국통신학회논문지
• /
• 제21권4호
• /
• pp.807-821
• /
• 1996

In this paper, we proposed a nonlinear hierarchical mtion estimation method. Generally, the conventional hierarchical motion estimation methods have been proposed for fast convergence and detection of large motions. But they have a common drawback that large error in motion estimation is propapated across motion discontinuities. This artifiact is due to the constriaint of motion continuity and the linear interpolation of motion vectors between hierarchical levels. In this paper, we propose an effective hierarchical motion estimation mechod that is robust to motion discontinuities. The proposed algorithm is based on the decomposition of the functional domain for optimizing the intra-level motion estimation functional. Also, we propose an inter-level nonlinear motion estimation equation rather than using the conventional linearprojection scheme of motion field. computer simulations with several test sequences show tht the proposed algorithm performs better than several conventional methods.