• Transactions on Control, Automation and Systems Engineering
• /
• v.2 no.4
• /
• pp.228-234
• /
• 2000

The aim of the work is to present a new method of estimating the existence of a mass unbalance and mass unbalance under a crack on a rotating shaft. This is an advanced new method for the detection of a mass unbalance and a new way to estimate the position of it under crack influence. As the first step, the shaft is physically modelled with a finite element method and the dynamic mathematical model is derived by using the Hamilton principle; thus, the system is represented by various subsystems. The equation of motion of the shaft with a mass unbalance and a crack are established by adapting the local mass unbalance and the stiffness change. this is a reference system for the given system. Based on a model for transient behavior induced from vabrations measured at the bearings, an elementary Estimator is designed to detect mass unblance on the shaft. Using the Estimator, a bank of the Estimator is established to estimate the estimate the position of the mass unbalance and arranged at a certain location on the shaft. The informations for the given system are the measurements of bearing displacements and velocity.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.417-420
• /
• 2005

In this paper proposes a very simple method to estimate the rotor position of a switched reluctance motor. By on-line estimating the self-inductance of the motor, the rotor position of the SR motor is obtained, and a closed-loop drive system can be achieved. Proposed methods can easy implement to application with sensorless SR motor drive system. Speed 2000rpm SR motor simulation executed with self inductance estimation and result represented. Simulation result verified the rotor position using the proposed self-inductance estimation method.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3048-3050
• /
• 1999

This paper suggests a position estimating algorithm using mono vision system with projective geometry method. Generally, 3-D information can not be easily extracted from mono vision system which is taken by a camera at a specific point. But this defect is overcome by adopting model-based image analysis and selecting lines and points on the ground as natural landmarks. And this paper suggests a method that estimates position from many natural landmarks by distance error weight function.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1041-1043
• /
• 1993

A robust position control scheme for a Brushless Direct Drive Motor(BLDDM) is presented. To obtain the robustness under the load variation, a Variable Structure Controller(VSC) is used. However, the VSC has a chattering problem and require the full state informations. To overcome this problem, in this paper, the sliding mode observer is used for compensating the load disturbance and estimating the motor velocity. As a result, the VSC for a BLDDM posision control is designed by using only position measurment and the chattering problem is greatly reduced. To show the validaty of the proposed scheme, the simulation study is carried out.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.1940-1942
• /
• 2001

Magnetic Levitation System(MLS) levitates a steel ball to the desired position in the gravity field using electromagnetic force. MLS consists of light sensor to measure the position of steel ball and an electromagnet to control the position of the ball, that composes a feedback control system. This work does not use a steel ball with constant mass but variable mass steel balls as magnetic levitation targets. Differential equation of electric circuit for electromagnet and motion equation of the movement of steel ball are derived for modeling nonlinear system, that will be linearized at the nominal operating point. We propose a digital control that can levitate a steel ball of which weight is not known for ED-4810 system. Algorithm for estimating ball weight and feedback control are implemented in digital scheme under pentium PC equiped with A/D and D/A converter, ACL-8112, using C-language. Simulation and experimental results are given to show the usefulness of the proposed controller.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.229-231
• /
• 2005

A sensorless control scheme for the switched reluctance motor (SRM) drive at speed control is presented in this paper. In this paper proposes a very simple method to estimate the rotor position of a switched reluctance motor. By on-line estimating the self-inductance of the motor, the rotor position of the SR motor is obtained, and a closed-loop drive system can be achieved. Proposed methods can easy implement to application with sensorless SR motor drive system. SR motor simulation executed with self inductance estimation and result represented.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.8
• /
• pp.752-759
• /
• 2008

In this paper, we propose a high accurate geo-location system based on a single base station, where its location is obtained by Time-of-Arrival(ToA) and Direction-of-Arrival(DoA) of the radio signal. For estimating accurate ToA and DoA information, a MUltiple SIgnal Classification(MUSIC) is adopted. However, the estimation of ToA and DoA using MUSIC algorithm is a time-consuming process. The position tracking bias is occurred by the time delay caused by the estimation process. In order to mitigate the bias error, we propose the estimation method of the position tracking bias and compensate the location error produced by the time delay using the position tracking bias mitigation. For accurate self-localization of mobile robot, the Unscented Kalman Filter(UKF) with position tracking bias is applied. The simulation results show the efficiency and accuracy of the proposed geo-location system and the enhanced performance when the Unscented Kalman Filter is adopted for mobile robot application.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.2
• /
• pp.235-242
• /
• 2008

An Autonomous mobile robot is a very useful system to achieve various tasks in dangerous environment, because it has the higher performance than a fixed base manipulator in terms of its operational workspace size as well as efficiency. A method for estimating the position of an object in the Cartesian coordinate system based upon the geometrical relationship between the image captured by 2-DOF active camera mounted on mobile robot and the real object, is proposed. With this position estimation, a method of determining an optimal path for the autonomous mobile robot from the current position to the position of object estimated by the image information using homogeneous matrices. Finally, the corresponding joint parameters to make the desired displacement are calculated to capture the object through the control of a mobile robot. The effectiveness of proposed method is demonstrated by the simulation and real experiments using the autonomous mobile robot.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.2
• /
• pp.64-69
• /
• 2007

Aerostatic planar XY stages are frequently used as the main frames of precision positioning systems. The machining and assembly process of the rails and bed of the stage is one of first processes performed when the system is built. When the system is complete, the 2D position, motion, and stage flatness errors are measured in tests. If the stage errors exceed the application requirements, the stage must be remachined and the assembly process must be repeated. This is difficult and time-consuming work. In this paper, a method for estimating the errors of a planar XY stage is proposed that can be applied when the rails and bed of the stage are evaluated. Profile measurements, estimates of the motion error, and 2D position estimation models were considered. A comparison of experimental results and our estimates indicated that the estimated errors were within $1{\mu}m$ of their true values. Thus, the proposed estimation method for 2D position and flatness errors of an aerostatic planar XY stage is expected to be a useful tool during the assembly process of guideways.

• Journal of Power Electronics
• /
• v.14 no.3
• /
• pp.564-571
• /
• 2014

Rotor initial position is an important factor affecting the control performance of electrically excited synchronous motors. This study presents a novel method for estimating rotor initial position based on sliding discrete Fourier transform (sDFT). By injecting an ac excitation into the rotor winding, an induced voltage is generated in stator windings. Through this voltage, the stator flux can be obtained using a pure integral voltage model. Considering the influence from a dc bias and an integral initial value, we adopt the sDFT to extract the fundamental flux component. A quadrant identification model is designed to realize the accurate estimation of the rotor initial position. The sDFT and high-pass filter, DFT, are compared in detail, and the contrast between dc excitation and ac injection is determined. Simulation and experimental results verify that this type of novel method can eliminate the influence of dc bias and other adverse factors, as well as provide a basis for the control of motor drives.