1 |
Kiyono, S. and Gao, W., 'Profile measurement of machined surface with a new differential method,' Precision Engineering, Vol. 16, pp. 212-218, 1994
DOI
ScienceOn
|
2 |
Makosch, G. and Drollinger, B., 'Surface profile measurement with a scanning differential AC interferometer,' Applied Optics, Vol. 23-24, pp. 4544-4553, 1984
|
3 |
Gao, W. and Kiyono, S., 'On-machine measurement of machined surface using the combined three-point method,' JSME International Journal, Vol. 40, pp. 253-259, 1997
DOI
ScienceOn
|
4 |
Estler, W. T., 'Calibration and use of optical straightedges in the metrology of precision machines,' Optical Engineering, Vol. 24, pp. 372-379, 1985
|
5 |
Tanaka, H. and Sato, H., 'Extensive analysis and development of straightness measurement by sequential two-point method,' Transactions of the ASME, Vol. 108, pp. 176-182, 1986
DOI
|
6 |
Park, C. H. and Lee, H., 'Motion error analysis of the porous air bearing stage using the transfer function,' Journal of the KSPE, Vol. 21, No. 7, pp. 185-194, 2004
|
7 |
Donaldson, R. R., 'A simple method for separating spindle error from test ball roundness error,' Annual CIRP, Vol. 21, pp. 125-126, 1972
|
8 |
Tanaka, H., Tazawa, K., Sato, H., O-hori, M. and Sekiguchi, H., 'Application of a new straightness measurement method to large machine tools,' Annual CIRP, Vol. 30, pp. 455-459, 1981
DOI
ScienceOn
|
9 |
Furukawa, M., Gao, W., Shimizu, H., Kiyono, S., Yasutake, M. and Takahashi, K., 'Three-dimensional slit width measurement for long precision slot die,' Key Engineering Materials, Vol. 295-296, pp. 343-348, 2005
DOI
|
10 |
Gao, W., Yokoyama, J., Kiyono, S. and Hitomi, N., 'A scanning multi-probe straightness measurement system for alignment of linear collider accelerator,' Key Engineering Materials, Vol. 295-296, pp. 253-258, 2005
DOI
|
11 |
Kounosu, K. and Kishi, T., 'Measurement of surface profile using smoothed serial three point method,' Journal of JSPE, Vol. 61, pp. 641-645, 1995
|
12 |
Yamaguchi, K., 'Measurement of straight motion accuracy using the improved sequential three-point method,' Journal of the JSPE, Vol. 59, pp. 773-778, 1993
|
13 |
Gao, W. and Kiyono, S., 'High accuracy profile measurement of a machined surface by the combined method,' Measurement, Vol. 19, pp. 55-64, 1996
DOI
ScienceOn
|
14 |
Fung, E. H. K. and Yang, S. M., 'An approach to on-machine motion error measurement of a linear slide,' Measurement, Vol. 29, pp. 51-62, 2001
DOI
ScienceOn
|
15 |
Evans, C. J., Hocken, R. J. and Estler, W. T., 'Self-calibration: Reversal, redundancy, error separation and absolute testing,' Annual CIRP, Vol. 45, pp. 617-624, 1996
DOI
ScienceOn
|
16 |
Tazawa, K., Sato, H. and O-hori, M., 'A new method for the measurement of the straightness of machine tools and machined work,' ASME Journal of Mechanical Design, Vol. 104, pp. 587-592, 1982
DOI
|
17 |
Hwang, J., Park, C. H., Lee, C. H. and Kim, S. W., 'Estimation and correction method for the two-dimensional position errors of a planar XY stage based on motion error measurements,' International Journal of Machine Tools and Manufacture, Vol. 46, pp. 801-810, 2006
DOI
ScienceOn
|
18 |
Gao, W., Yokoyama, J., Kojima, H. and Kiyono, S., 'Precision measurement of cylinder straightness using a scanning multiprobe system,' Precision Engineering, Vol. 26, pp. 279-288, 2002
DOI
ScienceOn
|
19 |
Hwang, J., Park C. H., Gao, W. and Kim, S. W., 'A three-probe method for measuring parallelism and straightness of a pair of rails for ultra precision machine tools,' Proceedings of the ASPE 2005 Annual Meeting, pp. 315-318, 2005
|