• 대한기계학회논문집B
• /
• 제21권3호
• /
• pp.341-349
• /
• 1997

The characteristics of defect correction method are discussed in a sample heat conduction problem showing the numerical solution of the error correction equation can predict the error of the numerical solution of the original governing equation. A way of using defect correction method combined with the existing algorithm for the incompressible fluid flow, is proposed and subsequently tested for the driven square cavity problem. The error correction equations for the continuity equation and the momentum equations are considered to estimate the errors of the numerical solutions of the original governing equations. With this new approach, better velocity and pressure fields can be obtained by correcting the original numerical solutions using the estimated errors. These calculated errors also can be used to estimate the orders of magnitude of the errors of the original numerical solutions.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.183-190
• /
• 2000

Effective range of Hydraulic Hammer Compaction was studied by numerical analysis instead of empirical method. Numerical analyses were carried out with commercial FEM code, ABAQUS, and verified by comparing the numerical results with field tests of Hydraulic Hammer Compaction. Most of material properties were evaluated by data from laboratory and in-situ tests. Vertical effective range was estimated by distribution curve of plastic strain energy dissipated through soil layers under dynamic load and these results were in good agreement with field tests. Based on verification, the effects of governing properties of Hydraulic Hammer Compaction such as number of hit can be determined by numerical analyses. In addition, vertical effective range can also be determined by Menard's empirical equation using the external work at converging time of plastic strain energy in numerical analysis. This implies that the minimum energy of Hydraulic Hammer Compaction for improvement can be determined by Menard's equation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.1151-1155
• /
• 2010

Frost depth is one of important factors to design roadway structure, and it can be estimated with numerical simulation on thermal distribution through subgrade soils. Thermal conductivity is a key parameter for accurate prediction on thermal distribution, but there are few studies on thermal conductivity of subgrade soils in Korea. Thermal conductivity can be affected by several factors such as dry density, moisture content, and saturation degree based on previous researches. Two empirical equations to estimate thermal conductivity are applied to access the accuracy of these equations with experimental data. Results indicate that the equation can be used to estimate thermal conductivity with proper quartz fraction.

• 한국환경과학회지
• /
• 제11권1호
• /
• pp.57-61
• /
• 2002

To investigate the flow characteristics by the water stage variation between stream-aquifer, the new solution of nonlinear Boussinesq equation was derived and extended using the Boltzmann transformation. The soundness of the analytic solution obtained from this study was examined by the comparison with the linearized analytic solution and the numerical solution by finite difference method. And the movement, velocity, flowrate and volume of flow caused by the stage variation of stream and the existence of regional gradient were estimated. This new analytic solution can express the groundwater movement between stream-aquifer. So, it might be helpful to manage water environment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.981-985
• /
• 1987

In this paper, we predicted the quantities of ass output messages with the generalized estimation equation based on regression model. And, to know the generalization of equation, we measured the deviation of errors between the observed and the estimated values. As a result, the proposed equation applied to sample data showed linear characteristics in some cases.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.697-702
• /
• 1999

Among several non-destructive testing methods, ultrasonic pulse velocity method has been widely used for the evaluation of concrete strength. However, this method might not provide accurate estimated results since factors influencing the relationship between strength and wave velocity is not considered. In this study, the evaluation methods of concrete strength using compression wave velocities measured by either ultrasonic pulse velocity method or impact-resonance method are proposed. A basic equation is obtained by the linear regression with velocity vs. strength data at a specific age and then, ageing factor is employed in the equation to consider the difference of the increasing rate between wave velocity and strength. Strengths predicted by the proposed equation agree well with test results.

• 대한기계학회논문집
• /
• 제1권4호
• /
• pp.171-181
• /
• 1977

This paper is aiming at calculating NOx concentration, which is one of the harmhul components of emission from the gasoline engine, formed in the combustor through the presess of combustion. Instantaneous temperature and concentration of each components for each division can be determined by the solution of simulatneous equation of reaction equation and equation of energy conservation, inputting the estimated temperature with a considerably wide rage of temperature. After determining instantaneous temperature and instantanous concentration of each components, the nonequilibrium calculation is performed based on the reaction kinetics in order to determine NOx concentration. To summarize the result abtained from the above method ;through the passage of NO concentration, NO concentration is the highest in the first division and it is gradually decreasing through the following divisions In the final division, NO concentation is the lowest.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권1호
• /
• pp.96-102
• /
• 1999

Sensorless speed estimation in induction motor systems is one of the most control engineers. Based on the estimated speed the vector control has been applied to the high precision torque control however most speed estimation methods use adaptive scheme so that it takes long time to estimate the speed. Thus the adaptive estimation scheme is not effective to the induction motor which requires short sampling time. In this paper a new linearized equation of induction motor system is proposed and a sensorless speed estimation algorithm based on observation techniques is developed. First the nonlinear induction motor equation is linearized at an equilibrium point. Second a proportional integral(PI) observer is applied to estimate the speed state in the induction motor system. Finally simulation results will assure the effectiveness of the new linearized equation and the sensorless estimation algorithm by using PI observer in the nonlinear induction motor system.

• 대한기계학회논문집A
• /
• 제27권8호
• /
• pp.1317-1323
• /
• 2003

In this paper, In-air and in-water vibration characteristics of Rotary Specimen Rack(RSR) are estimated through 3D finite element analysis by using ANSYS software. Added mass is calculated by using Blevins' equation. To confirm the accuracy of the results presented in this study, obtained results are compared to those of using a theoretical equation. It is confirmed that in-water natural frequencies of the RSR are lower than in-air ones due to tile added mass effect of the fluid. Also, good agreement is founded between natural frequency ratios obtained by a theoretical equation and those of using ANSYS.

• 기술혁신연구
• /
• 제6권2호
• /
• pp.178-207
• /
• 1998

This article suggests a methodology to decide the priority of investment project for venture business under the dynamic circumstance. By the Monte Carlo procedure on the probability distribution of cost and revenue, the model simulates the investment project to estimate profit ratio and risk. The profit ratio is calculated on the yearly basis for the relative comparison. The project risk is calculated as semi-variance under the target yield. After sufficient simulations in this fashion for several projects, the efficient projects with more profit and less risk are selected by the dominance principle. Then the regression equation of the selected projects is produced to find the relative value of the projects. The relative value is obtained through dividing the raw profit ratio by the estimated one on the equation. This value shows the degree to which the simulated project yields over the equation. The priority of investment is decided by this value. An examplary venture business of chemical development for semi-conductor is presented as a case study.