• Journal of the Optical Society of Korea
• /
• v.14 no.1
• /
• pp.22-27
• /
• 2010

Bit error rate (BER) monitoring is the ultimate goal of performance monitoring in all digital transmission systems as well as optical fiber transmission systems. To achieve this goal, optimization of the decision threshold must also be considered because BER is dependent on the level of decision threshold. In this paper, we analyze a pseudo-error counting scheme and propose an algorithm to achieve both BER monitoring and adaptive decision threshold optimization in optical fiber transmission systems. To verify the effectiveness of the proposed algorithm, we conduct computer simulations in both Gaussian and non-Gaussian distribution cases. According to the simulation results, BER and the optimum decision threshold can be estimated with the errors of < 20% and < 10 mV, respectively, within 0.1-s processing time in > 40-Gb/s transmission systems.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.1 s.307
• /
• pp.17-26
• /
• 2006

The error diffusion method is one of the digital halftoning processes that transforms the continuous-tone image to the binary image and the method has the excellent reproduction ability. However the error diffusion method using the permanent threshold has difficulty in proper binarization, so the method has the periodic pattern and is unpleasant to the eye. In this paper, to reduce defects and to binarize properly, we propose the error diffusion method using the adaptive threshold. Depending on the intensity distribution of the input gray scale image, we decided on the adaptive threshold with the average of the intensities. The error diffusion method with the adaptive threshold has the better performance than the existing method and is evaluated with experiments and comparisons.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.4
• /
• pp.141-147
• /
• 2014

The wavelet shrinkage is a technique that reduces the wavelet coefficients to minimize the MSE(Mean Square Error) between the signal and the noisy signal by making use of the threshold determined by the variance of the wavelet coefficients. In this paper, by using the monotonic transform and the power of wavelet subbands, new thresholds applicable to the high and the low frequency wavelet bands are proposed, and the thresholds are applied to the ST(soft-threshold) technique to denoise on image signals with additive Gaussian noise. And the results of PSNRs are compared with the results obtained by the VisuShrink technique and those of [15]. The results shows the validity of this technique.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1418-1421
• /
• 1987

An important problem in edge detection is to select a proper threshold that transforms the gradient picture to e two level picture containing optimum edges between regions, Such a threshold is determined depending on some measures of errors in tresholding. In this paper, an error criterion on extracting edges by thresholding the block gradient image is presented. Based on the error measure, the optimum threshold is chosen for the detection of acceptable edges.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.461-464
• /
• 2003

This paper proposes the multi-level vector error diffusion for smear artifact reduction in the boundary regions. Smear artifact mainly results from a large accumulation of quantization error. Accordingly, to reduce these artifacts, the proposed method excludes the large quantization error in the error diffusion process by comparing the magnitude of the error vector with predetermined first threshold. In addition, if the vector norm of the difference between the error adjusted input vector and the primary co]or that has minimum vector norm for the error adjusted input vector is larger than second threshold, the error is excluded. As a result, the proposed method reduce smear artifact in the boundary region and produces visually pleasing halftone pattern.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.45
• /
• pp.57-65
• /
• 1998

This paper addresses the data classification using the induction of decision trees. A weakness of other techniques of induction of decision trees is that decision trees are too large because they construct decision trees until leaf nodes have a single class. Our study include both overcoming this weakness and constructing decision trees which is small and accurate. First, we construct the decision trees using classification threshold and exception threshold in construction stage. Next, we present two stage pruning method using classification threshold and reduced error pruning in pruning stage. Empirical results show that our method obtain the decision trees which is accurate and small.

• ETRI Journal
• /
• v.33 no.1
• /
• pp.27-31
• /
• 2011

This paper addresses estimating the frequency of a cisoid in the presence of white Gaussian noise, which has numerous applications in communications, radar, sonar, and instrumentation and measurement. Due to the nonlinear nature of the frequency estimation problem, there is threshold effect, that is, large error estimates or outliers will occur at sufficiently low signal-to-noise ratio (SNR) conditions. Utilizing the ideas of averaging to increase SNR and weighted linear prediction, an optimal frequency estimator with smaller threshold SNR is developed. Computer simulations are included to compare its mean square error performance with that of the maximum likelihood (ML) estimator, improved weighted phase averager, generalized weighted linear predictor, and single weighted sample correlator as well as Cramer-Rao lower bound. In particular, with smaller computational requirement, the proposed estimator can achieve the same threshold and estimation performance of the ML method.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.13 no.6
• /
• pp.121-127
• /
• 2003

The threshold value of the traitor-tracing schemes means a maximum number of traitors whose identities can be uniquely exposed using the tracing scheme. In the traitor-tracing scheme based on an error-correcting code, which is focused at this paper, the threshold value is determined by the error-correcting capability of the underlying error-correcting code. Analyzed in terms of a combinatorial property of the tracing scheme is the resulting effect on the tracing scheme when the collusion size is over the threshold value, and a possibility of two disjoint groups of users making an identical unauthorized decryption key is shown.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.6C
• /
• pp.623-628
• /
• 2006

This paper addresses the frequency offset estimation problem in the presence of the timing error for OFDM systems. When the timing error exists, the correlation value used for the frequency offset estimation could be reduced significantly due to the timing error, resulting in considerable degradation in estimation performance. In this paper, using the coherence phase bandwidth (CPB) and a threshold, a novel frequency offset estimation scheme is proposed and based on which, an efficient timing error estimation scheme is also proposed for the re-estimation of the frequency offset. The performance comparison results show that the proposed frequency offset estimation scheme is not only more robust to the timing error but also has less computational complexity, as compared with the conventional schemes. It is also demonstrated by simulation that theproposed timing error estimation scheme gives a reliable estimate of the timing error.

• Journal of IKEEE
• /
• v.14 no.2
• /
• pp.90-97
• /
• 2010

The high efficiency power management IC(PMIC) with DTMOS(Dynamic Threshold voltage MOSFET) switching device and DTMOS Error Amplifier is presented in this paper. PMIC is controlled with PWM control method in order to have high power efficiency at high current level. Dynamic Threshold voltage CMOS(DT-CMOS) with low on-resistance is designed to decrease conduction loss. The control parts in Buck converter, that is, PWM control circuits consist of a saw-tooth generator, a band-gap reference circuit, an DT-CMOS error amplifier and a comparator circuit as a block. the proposed DT-CMOS Error Amplifier has 72dB DC gain and 83.5deg phase margin. also Error Amplifier that use DTMOS more than CMOS showed power consumption decrease of about 30%. DC-DC converter, based on Voltage-mode PWM control circuits and low on-resistance switching device is achieved the high efficiency near 96% at 100mA output current. And DC-DC converter is designed with Low Drop Out regulator(LDO regulator) in stand-by mode which fewer than 1mA for high efficiency.