• Journal of Information Display
• /
• v.2 no.2
• /
• pp.32-38
• /
• 2001

PDP(plasma display panel) represents the gray levels by the pulse number modulation technique that results in undesirable dynamic false contours on moving images. This paper proposes a LUT(Look-up table) based error diffusion algorithm for reduction of the dynamic false contours. A quantitative measure of the dynamic false contours is defined first. The measure of the dynamic false contours is calculated through simulation of every gray level combination of two consecutive frames. Based on the calculated measures, a modified gray level for a pair of gray levels of two consecutive frames is chosen to reduce the dynamic false contours. The chosen gray levels serve as contents of a gray level conversion LUT. Given a pair of gray levels of two consecutive frames, the gray level of current frame is modified based on the gray level conversion LUT. The new gray level is displayed on PDP. An error diffusion algorithm is, then, applied to compensate for the differences in the gray levels.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.4
• /
• pp.25-32
• /
• 1997

In this paper, we propose an adaptive BTC algorithm using the characteristics of the error signals. The BTC algorithm has a avantage that it is low computational complexity, but a disadvantage that it produces the ragged edges in the reconstructed images for th esloping regions beause of coding the input with 2-level signals. Firstly, proposed methods classify the input into low, medium, and high activity blocks based on the variance of th einput. Using 1-level quantizer for low activity block, 2-level for medium, and 4-level for high, it is adaptive methods that reduce bit rates and the inherent quantization noises in the 2-level quantizer. Also, in case of processing high activity block, we propose a new quantization level allocation algorithm using the characteristics of the error signals between the original signals and the reconstructed signals used by 2-level quantizer, in oder that reduce bit rates superior to the conventional 4-level quantizer. Especially, considering the characteristics of input block, we reduce the bit rates without incurrng the visual noises.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.461-464
• /
• 2003

This paper proposes the multi-level vector error diffusion for smear artifact reduction in the boundary regions. Smear artifact mainly results from a large accumulation of quantization error. Accordingly, to reduce these artifacts, the proposed method excludes the large quantization error in the error diffusion process by comparing the magnitude of the error vector with predetermined first threshold. In addition, if the vector norm of the difference between the error adjusted input vector and the primary co]or that has minimum vector norm for the error adjusted input vector is larger than second threshold, the error is excluded. As a result, the proposed method reduce smear artifact in the boundary region and produces visually pleasing halftone pattern.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.33-34
• /
• 2017

The purpose of this case study is to reduce the flaw and reconstruction occur at the level of construction by determining the propriety of estimate and error on a drawing and specification at working design level through case studies of BIM application at the level of design review. As a preliminary to apply BIM technology, it is needed to review the drawing, and then it is required to define BIM range by selecting the section in which construction error occurs frequently except for the type of part that is constructed repeatedly. At the execution level, the drawing is reviewed vertically, horizontally and spatially by proceeding structure and finish modeling on the defined BIM range, and also the propriety of estimate and error on the drawing and specification are examined. We aim to raise the completion rate, improve quality of construction, reduce the cost for construction and shorten period of construction by preparing for the error on the drawing and specification in advance through this review procedures.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.2
• /
• pp.205-210
• /
• 2008

The research interprets the principles of sampling error design for quality statistics models such as hypothesis test, interval estimation, control charts and acceptance sampling. Introducing the proper discussions of the design of significance level according to the use of hypothesis test, then it presents two methods to interpret significance by Neyman-Pearson and Fisher. Second point of the study proposes the design of confidence level for interval estimation by Bayesian confidence set, frequentist confidential set and fiducial interval. Third, the content also indicates the design of type I error and type II error considering both productivity and customer claim for control chart. Finally, the study reflects the design of producer's risk with operating charistictics curve, screening and switch rules for the purpose of purchasing and subcontraction.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.7-10
• /
• 2007

The 1st order vertical network of Korea was adjusted in 1987 at first time. This is the second adjustment of the 1st order vertical network of Korea by National Geographic Information Institute. All the levelling data were acquired by digital level with invar staff. The number of 1st order level lines are 36, and 34 level lines comprise 11 circles of level network. Backward and forward error of a few level lines are larger than the regulations of NGII, Korea. Also, 3 circles of vertical network has circuit closure error that is exceed the regulation. As the result of 1st order vertical network adjustment, the reference standard error of the vertical network was $1.8mm/{\surd}km$.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.628-632
• /
• 2007

The purpose of study is to confirm a acceptable range of data errors in data collecting. To examine a acceptable range of data errors, emission level is calculated for a vehicle flow and heavy vehicle percentage as a function of small-sized velocity. According to road selected, noise level of detail influence road noise calculations. It can be concluded that a vehicle flow raised an error less than 5000(veh/h) for a maximum error in emission level of 3.01dB, and the more a heavy vehicle percentage have a low value, the more emission level is a slight difference. This analysis gives insight regarding the accuracy of traffic flow data that is needed to reach a certain level of accuracy for the resulting noise level.

• Journal of the Optical Society of Korea
• /
• v.15 no.3
• /
• pp.244-251
• /
• 2011

We propose a new 2-step phase-shifting digital holographic optical encryption technique and analyze tolerance error for this cipher system. 2-step phase-shifting digital holograms are acquired by moving the PZT mirror with phase step of 0 or ${\pi}$/2 in the reference beam path of the Mach-Zehnder type interferometer. Digital hologram with the encrypted information is Fourier transform hologram and is recorded on CCD camera with 256 gray-level quantized intensities. The decryption performance of binary bit data and image data is analyzed by considering error factors. One of the most important errors is quantization error in detecting the digital hologram intensity on CCD. The more the number of quantization error pixels and the variation of gray-level increase, the more the number of error bits increases for decryption. Computer experiments show the results to be carried out encryption and decryption with the proposed method and the graph to analyze the tolerance of the quantization error in the system.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06c
• /
• pp.107-110
• /
• 1994

In this paper, we describe the features of the fundamental frequency contour of Korean read speech, and propose a new stylization method to characterize the Fø pattern of segments. Our algorithm consists of three stylization processes : the segment level, the syllable level, and the sord level. For stylization of Fø contour in the segment level , we applied least square error minimization method to determine Fø values at initial, medial, and final position in a segment. In the syllable level, we determine the stylized Fø pattern of a syllable using the mean Fø value of each word and style information for each word, syllable and segment, we reconstruct Fø contour of sentences. The simulation results show that the error is less than 10% of the actual Fø contour for each sentence. In perception test, there is little difference between the synthesized speech with the original difference between the synthesized speech with the original Fø contour and the synthesized speech with the stylized Fø contour.

• Journal of KSNVE
• /
• v.7 no.6
• /
• pp.919-929
• /
• 1997

Induction motors are used in many areas to transform electrical energy to mechanical energy. In the design of an induction motor, not only energy efficiency but also noise becomes an important factor. To effectively address the noise problem, it will be convenient if one can see where and how noise is generated and propagated. In this study sound radiation by an induction motor is visualized using cylindrical acoustic holography. To minimize the bias error by window effect Minimum Error Window(MEW) is used. Its performance is verified by numerical simulations. Based on these theoretical understanding, sound pressure measurement with an induction motor are performed. Not only sound radiation are visualized but sound pressure level and sound power level are also estimated. Results show that the main source is located at nearly bottom part of the motor and the total sound pressure level is 49dB, which satisfies the guideline value suggested by the KS C 4202.