• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.3
• /
• pp.45-51
• /
• 2003

Milling process has beer used in aircraft, auto-component and mold industries widely. They need more accurate and precise parts to improve the performance and quality of their products. So, the geometrical form accuracy of the workpiece surface generated by this process is getting more and more important. Generally, the form accuracy is affected by machine conditions, cutting conditions, tool geometry, tool deflection by cutting force and tool path md so on. Even though they are controlled as perfect conditions, it is easily found that there is a line along the axis of a cylindrically milled part. It is presumed that the tool approaching causes this error on milled surface. Thus, the study for investigating the effect of the tool approaching path on the cylindrical surface geometry of the end-milled part is carried out.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2362-2367
• /
• 2005

This paper reports a technique for discriminating double talk and echo path change using the stochastic characteristics of power change for an adaptive noise canceller. The causes of rapid error increasing are double talk and echo path change. When the echo path is changed, the system corrects the impulse response in order to reduce the error. However, in the case of double talk, the system has to suspend the updating impulse response in order to maintain the quality of the voice signal. In the conventional system, it was difficult to discriminate between the two situations. In this research, the stochastic characteristics of the voice power change in the double talk period were experimentally verified to be different from the power change during echo path changing. Based on the results, a new double talk detection method is proposed.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.1E
• /
• pp.33-42
• /
• 2003

Kuo et al proposed an on-line method for an adaptive prediction error filter for improving secondary path modeling performance in the modeling method of the secondary path. This method have some disadvantages, namely having to use additive noise with the result that noise control performance is not good since it is focused on the estimated performance of the secondary path. In this paper, we proposes a modified Kuo model using gain control parameter and delay. It uses a reference signal for additive noise to improve the problems in the existing Kuo model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.9
• /
• pp.2433-2443
• /
• 1996

In this paper, a new technique is proposed for obtaining the error probabilities of the VSB(vestigial sideband modulation) signal in the presence of the cochannel interference and frequency-selective fading channel. For the receivers, a suboptimal matched filter receiver and the MLSE(maximum likelihood sequence estimation) receiver, which is known to be optimal on the fading channel, are considered. First, for the matched filter receiver, the distributions of the random variables, which determine the SER(symbol error rate) are obtained by decomposing the multi-path fading channel into Rayleigh distributed main path and Gaussian distributed remained path channels. the random variables mean the energy of the main path and subpath respecitively, and SER can be calculated from the distribution of them. Next, for the case of the MLSE receover, it is found that the random variables are expressed as a function of integrals. In order to obtain the distribution for the random variables, we expanded each element of integrals with the KL(Karhunen-Loeve) transformation. And it is derived that the distributions for the transformed random variables are given by a sum of chi-square distributions. Finally, we calculated the error rate derived formula on the two-ray fading channel, which is one of widely used models for the frequency-selective fading channel. From the numerical results, it is found that for the matched filer receiver, performance degradation is significant, while the performance degradation at the MLSE receiver is insignificant on the frequency-selective fading channel. However, in case of cochannel interference environment, the error rateis found to increase significantly both at the matched filter and at the MLSE receiver.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.8
• /
• pp.721-728
• /
• 2014

In this paper, it is proposed a method of optimizing path parameters for large-area laser processing. On-the-fly system is necessary for large-area laser processing of uniform quality. It is developed a MOTF(Marking On-The-Fly) board for synchronizing the stage and scanner. And it is introduced the change of the error due to the change of parameters and algorithm for large-area laser processing. This algorithm automatically generates stage path and a velocity profile using acceleration and deceleration parameters. Since this method doesn't use a G-code, even if without expert knowledge, it has an advantage that can be accessed easily. Angle of one of the square of $350{\times}350mm$ was changed from $50^{\circ}$ to $80^{\circ}$ and analyzed the error corresponding to the value of Ta. It is calculated the value of Ta of the best with a precision of 20um through measurement of accuracy according to the Ta of each angle near the edge.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.8
• /
• pp.1528-1535
• /
• 1994

In this paper, a filtered-X LMS algorithm by new error path identification method is proposed for active noise control system. The proposed algorithm identifies accurately the error path transfer function using three microphones and the control of error signal through double loop scheme with on-line. In the computer simulation using the sinusoidal and the practical duct noise, the proposed algorithm reduces noise level about 29.1dB and 10.4dB, respectively. We can observe the improvement of about 0.5dB and 2.5dB in noise level compared with that obtained using the filtered-X LMS algorithm of Eriksson model.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.11
• /
• pp.898-906
• /
• 2014

This paper presents a reduction method for a straight-line path error of a flexible beam deploying from a rotating rigid hub. Previous studies discussed about only vibration phenomena of flexible beams deploying from rotating hubs; however, this study investigates a vibration reduction of a rotating beam with variable length. The equation of motion and associated boundary conditions are derived for a flexible beam deploying from a rotating rigid hub, and then they are transformed to a variational equation. By applying the Galerkin method, the discretized equations are obtained from the variational equation. Based on the discretized equations, the dynamic responses of a rotating/deploying beam are analyzed when the beam end has a straight line motion. A reduction method for the trajectory error is proposed, using the average length of a rotating/deploying beam. It is shown that the proposed method is able to reduce the residual vibration of a rotating/deploying beam.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.3 no.1
• /
• pp.7-14
• /
• 2004

Machining error is defined the normal distance between designed surface and actual tool path with tool deflection. This is inevitably caused by the tool deflection, tool wear, thermal effect and machine tool errors and so on. Among these factors, tool deflection is usually known as the most significant factor of machining error. Tool deflection problem is analyzed using Instantaneous horizontal cutting forces. The high quality and precision of machining products are required in finishing. In order to achieve these purposes, it is necessary work that decrease the machining error. This paper presents a study on the machining error caused by the tool deflection in ball end milling of 2 dimensional surface. Tool deflection model and simple machining error prediction model are described. This model is checked the validity with machining experiments of 2 dimensional surface. These results may be used to decrease machining error and tool path decision.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.670-677
• /
• 1998

Many of the adaptive noise control systems utilize a form of the least mean square (LMS) algorithm. In the active control of noise, it is common practice to locate an error microphone far from the control source to avoid the near-field effects by evanescent waves. Such a distance between the control source and the error microphone makes a certain level of time-delay inevitable and, hence, may yield undesirable effects on the convergence properties of control algorithms such as filtered-x LMS. This paper discusses the dependence of the convergence rate on the acoustic error path in these popular algorithms and introduces new algorithms which increase the convergence region regardless of the time-delay in the acoustic error path. Performances of the new LMS algorithms are presented in comparison with those by the conventional algorithms based on computer stimulations and experiments.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.376-381
• /
• 2001

This paper presents a methodology of machining error compensation by using Artificial Neural Network(ANN) model based on the inspection database of On-Machine-Measurement(OMM) system. First, the geometric errors of the machining center and the probing errors are significantly reduced through compensation processes. Then, we acquire machining error distributions from a specimen workpiece. In order to efficiently analyze the machining errors, we define two characteristic machining error parameters. These can be modeled by using an ANN model, which allows us to determine the machining errors in the domain of considered cutting conditions. Based on this ANN model, we try to correct the tool path in order to effectively reduce the errors by using an iterative algorithm. The iterative algorithm allows us to integrate changes of the cutting conditions according to the corrected tool path. Experimentation is carried out in order to validate the approaches proposed in this paper.