• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.5
• /
• pp.130-135
• /
• 2013

Until now, passenger airbag design is based on the referred car design and many repetitive crash tests have been done to meet the crash performance. In this paper, it was suggested a new design process of passenger airbag. First, key performance factors were determined by analyzing the injury risk effectiveness of each performance factor. And it was made a relationship between injury risk and performance factor by using the response surface model. By using this one, it can be predicted the injury risk of head and neck. Predicted injury risk of optimal design was obtained through this injury risk prediction model and it was verified by FE analysis result within 18% error of head and 9% error of neck. It was shown that a target crash performance can be met by controlling the key performance factors only.

• Journal of the Ergonomics Society of Korea
• /
• v.20 no.2
• /
• pp.1-28
• /
• 2001

This paper deals with the selection of the important Influencing Factors (IFs) under accident management situations in nuclear power plants for use in the assessment of human errors. In order to achieve this goal, we collected two types of IF taxonomies, one is the full set IF list mainly developed for human error analysis. and the other is the IFs for human reliability analysis (HRA) in probabilistic safety assessment (PSA). Five sets of IF taxonomy among the full set IF list and ten sets of IF taxonomy among HRA methodologies were collected in the study. From the review and analysis of BRA IFs, we could obtain some insights for the selection of HRA IFs. By considering the situational characteristics of the accident management domain, candidate IFs are chosen. Finally, those IFs are structured hierarchically to be appropriate for the use in the assessment of human error under accident management situation. Three nuclear accidents such as TMI. Chernobyl and JCO were analysed to validate the proposed taxonomy.

• Journal of Magnetics
• /
• v.21 no.3
• /
• pp.356-363
• /
• 2016

To improve the sensing accuracy of the newly developed magnetically suspended sensitive gyroscope (MSSG), it is necessary to analyze the causes of drift error. This paper build the models of disturbing torques generated by stator assembly errors based on the geometric construction of the MSSG with double spherical envelope surfaces, and further reveals the generation mechanism of the drift error. Then the drift error from a single stator magnetic pole is calculated quantitatively with the established model, and the key factors producing the drift error are further discussed. It is proposed that the main approaches in reducing the drift error are guaranteeing the rotor envelope surface to be an ideal spherical and improving the controlling precision of rotor displacement. The common problems associated in a gyroscope with a spherical rotor can be effectively resolved by the proposed method.

• Journal of the Optical Society of Korea
• /
• v.15 no.3
• /
• pp.244-251
• /
• 2011

We propose a new 2-step phase-shifting digital holographic optical encryption technique and analyze tolerance error for this cipher system. 2-step phase-shifting digital holograms are acquired by moving the PZT mirror with phase step of 0 or ${\pi}$/2 in the reference beam path of the Mach-Zehnder type interferometer. Digital hologram with the encrypted information is Fourier transform hologram and is recorded on CCD camera with 256 gray-level quantized intensities. The decryption performance of binary bit data and image data is analyzed by considering error factors. One of the most important errors is quantization error in detecting the digital hologram intensity on CCD. The more the number of quantization error pixels and the variation of gray-level increase, the more the number of error bits increases for decryption. Computer experiments show the results to be carried out encryption and decryption with the proposed method and the graph to analyze the tolerance of the quantization error in the system.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.367-372
• /
• 2000

Accuracy of a machined component is determined by the relative motion between the cutting tool and the workpiece. One of the important factors which affects the accuracy of this relative motion is the geometric error of machine tools. In this study, geometric error is modeled using form shaping motion of machine tool, where a form shaping function is derived from the homogeneous transformation matrix. Geometric errors are measured by laser interferometer. After that, the local positioning error can be estimated from the form shaping model and geometric error data base. From this information, we can remodel the part by shifting the design surface to the amount of positional error. By generating tool path to the redesigned surface, we can reduce the machining error.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.5
• /
• pp.69-76
• /
• 2008

Inner diameter of bearing race is automatically measured by complete inspection system after grinding process. Contact type three points supporting method is widely applied to automatic inner diameter measurement because of its excellent stability. However, the geometric consideration regarding three points supporting method is not sufficient. In this study, the error equation from geometric error analysis of three points supporting method is found. The effect of factors in the error equation is also investigated. The error equation is linear for difference of diameter in sample and master on range of tolerance. An error becomes more and more larger, when the distance of two supporting balls or the diameter of supporting ball are increased. In the result, some considerations are proposed for measurement of inner diameter by the three points supporting method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8C
• /
• pp.775-781
• /
• 2007

In this paper, a modified PTS(Partial Transmit Sequences) technique that uses erasure decoding of RS (Reed-Solomon) codes is presented. At the transmitter, some check symbols in a RS codeword partitioned into subblocks are phase-rotated by phase factors. The receiver decodes received codewords by regarding the phase-rotated check symbols as erasures. Hence, this technique does not need to transmit the side information about the phase factors chosen at the transmitter. The complexity of the receiver is also reduced since the estimation process for the phase factors is not required in the receiver. There is no performance degradation due to the transmission error of the side information or the estimation error of the phase factors. To evaluate the performance of the proposed PTS technique, the CCDF(Complementary Cumulative Distribution Function) of PAPR and the BER(Bit Error Rate) are compared with those of the conventional PTS techniques.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.9
• /
• pp.4109-4115
• /
• 2014

Background: Accurate assessment of disease progression requires proper understanding of natural disease process which is often hidden and unobservable. For this purpose, disease status should be clearly detected. But in most diseases it is not possible to detect such status. This study, therefore, aims to present a model which both investigates the unobservable disease process and considers the error probability in diagnosis of disease states. Materials and Methods: Data from 330 patients with gastric cancer undergoing surgery at the Iran Cancer Institute from 1995 to 1999 were analyzed. Moreover, to estimate and assess the effect of demographic, diagnostic and clinical factors as well as medical and post-surgical variables on transition rates and the probability of misdiagnosis of relapse, a hidden Markov multi-state model was employed. Results: Classification errors of patients in alive state without a relapse ($e_{21}$) and with a relapse ($e_{12}$) were 0.22 (95% CI: 0.04-0.63) and 0.02 (95% CI: 0.00-0.09), respectively. Only variables of age and number of renewed treatments affected misdiagnosis of relapse. In addition, patient age and distant metastasis were among factors affecting the occurrence of relapse (state1${\rightarrow}$state2) while the number of renewed treatments and the type and extent of surgery had a significant effect on death hazard without relapse (state2${\rightarrow}$state3)and death hazard with relapse (state2${\rightarrow}$state3). Conclusions: A hidden Markov multi-state model provides the possibility of estimating classification error between different states of disease. Moreover, based on this model, factors affecting the probability of this error can be identified and researchers can be helped with understanding the mechanisms of classification error.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.1
• /
• pp.261-269
• /
• 2012

Objective: The aim of this study is to develop an analysis method to extract plausible types of errors when using a smart mobile in nuclear power plants. Background: Smart mobiles such as a smart-phone and a tablet computer(smart-pad) are to be introduced to the various industries. Nuclear power plant like APR1400 already adopted many up-to-date digital devices within its main control room. With this trend, various types of smart mobiles will be inevitably introduced to the nuclear field in the near future. However nuclear power plants(NPPs) should be managed considering a big risk as a result of the trend not only economically but also socially compared to the other industrial systems. It is formally required to make sure to reasonably prevent the all hazards due to the introduction of new technologies and devices before the application to the specific tasks in nuclear power plants. Method: We define interaction segments(IS) as a main architect of interaction description, and enumerate all plausible error segments(ES) for a part of design evaluation of digital devices. Results: We identify various types of interaction errors which are coped with reasonably by interaction design using smart mobiles. Conclusion: According to the application result of the proposed method, we conclude that the proposed method can be utilized to specify the requirements to the human error hazards in digital devices, and to conduct a human factors review during the design of digital devices. Application: The proposed method can be applied to predict the human errors of the tasks related to the digital devices; therefore we can ensure the safety to apply the digital devices to be introduced to NPPs.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.12
• /
• pp.99-108
• /
• 1999

A four-degree-of-freedom non-linear model with time varying mesh stiffness has been developed for the dynamic analysis of spur gear trains. The model includes a spur gear pair, two shafts, two inertias representing load and prime mover. In the model, developed several factors such as time varying mesh stiffness and damping, separation of teeth, teeth collision, various gear errors and profile modifications have been considered. Two computer programs are developed to calculate stiffness of a gear pair and transmission error and the dynamic analysis of modeled system using time integration method. Dynamic tooth and mesh forces, dynamic factors are calculated. Numerical examples have been given, which shows the time varying mesh stiffness ha a significant effect upon the dynamic tooth force and torsional vibrations.