• Corrosion Science and Technology
• /
• 제13권4호
• /
• pp.130-138
• /
• 2014

Wall thinning can be classified into three types: flow-accelerated corrosion, cavitation erosion and solid particle erosion. This article presents a study of solid particle erosion, which frequently causes damages to power plants' pipe system. Unlike previous studies, this study uses a mechanism to make solid particles in a fluid flow collide with pipe materials in underwater condition. Experiment is conducted in three cases of velocity according to solid-water ratio using the three types of the materials of A106B, SS400, and A6061. The experiments were performed for 30 days, and the surface morphology and hardness of the materials were examined for every 7 days. Based on the velocity change of the solid particles in a fluid flow, the surface changes, the change in the amount of erosion, the erosion rate and the variation in the hardness of carbon steel and aluminum family pipe materials can all be determined. In addition, factor-based erosion rates are verified and a wall-thinning relation function is suggested for the pipe materials.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.403-408
• /
• 2003

The erosion behavior of :artificially aged HK40 steel was investigated. Erosion tests were conducted at room temperature, $200^{\circ}C$ and $400^{\circ}C$ using $Al_2O_3$ particles. Erosion rates increased with increment of temperature. The maximum erosion rate increased with the impingement angle of 30 degree. The erosion rate increased, reached the maximum at 1000 hours, and after that, decreased with heat treatment time. The mechanism of erosion seems to be the cutting wear which is very much associated with the strength of material. As results, the erosion rates were rather affected by the tensile strength and the strain hardening coefficient than the hardness and the yield strength. Such changes of material properties would be caused by the change of micro-structure due to the precipitation of carbide and the dissolution of solid element within matrix during the heat treatment.

• 한국해안해양공학회지
• /
• 제17권2호
• /
• pp.119-128
• /
• 2005

미세-점착성 퇴적물의 침식률 산정을 목적으로 국내 최초로 환형수조가 제작되었으며, 수조의 성능, 실험 방법 및 결과 등에 대한 타당성 검증을 목적으로 고령토를 이용한 침식실험이 수행되었다. 각기 다른 밀도를 갖는 균일저면 조건하에서 총 4회의 실험이 수행되었으며, 이 결과로부터 점착성 퇴적물의 침식한계 전단응력과 침식률 계수가 산정되었다. 기존의 타 연구결과와의 비교$\cdot$검토를 통하여, 본 연구에서 특수 제작된 환형수조는 성능상에 문제가 없음이 간접적으로 확인되었으며, 균일저면의 제작과정을 포함하는 침식실험 방법 및 실험 결과의 타당성이 입증되었다.

• 한국산학기술학회논문지
• /
• 제9권2호
• /
• pp.291-297
• /
• 2008

일방향 탄소섬유 강화 복합재료(CFRP)의 고체입자 마식 거동을 다양한 충돌각도 (${\alpha}$), 속도 (V) 및 섬유 방향 (${\beta}$)에 대하여 연구하였다. 실험결과 30o 충돌각도에서 최대 마식률을 나타내었고, 마식률은 멱함수 법칙 $E{\propto}\;V^n$에 따라 충돌속도에 크게 의존하였다. 본 연구에서는 이상의 결과로부터 일방향 탄소섬유 강화 복합재료의 마식률을 충돌속도, 충돌각도 및 섬유방향 각도로부터 예측하는 방법을 제안하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.376-378
• /
• 1988

W/CE system contacts were manufactured f a press sinter-infiltrate process to compare with their arc erosion mechanism. The results of arc switching test show that erosion rate of contacts is dependence of test current and there is difference in the erosion rates between W contacts and WC contacts. At high current of 1000A erosion rate of W contacts is critically increased by formation of surface cracks. In especial arc anti-erosion is improved by Hi additive.

• 수산해양기술연구
• /
• 제35권2호
• /
• pp.196-200
• /
• 1999

In the case that erosion and corrosion occurs in machinery and structure at the same time, the synergy effect by erosion-corrosion affects fatal effect to durability of machinery and structure. Therefore, in machinery and structure which use corrosion liquid, the study of the synergy effect of erosion-corrosion which affects metal material is requested. In this paper. the flow corrosion experiment about the effect of temperature change and liquid velocity change in sea water was carried out to study the characteristics of erosion-corrosion for tube material Cu heat exchanger The main results obtained are as follows. (1) Damage appearance of tube outside by erosion-corrosion becomes dull because electrode potentials of Cu tube is higher than electrode potential of STPG38 shell. (2) In the cooling system by sea water, the weight loss rate of Cu at tube outside liquid temperature of $70^{\circ}C$ is higher than that of temperature of $20^{\circ}C$. (3) In cooling system by sea water, the weight loss rate of Cu at liquid velocity of 5.1m/s is higher than that of velocity of 1.47m/s. But as the testing time passed, the weight loss rate of Cu at velocity of 5.1m/s is almost steady and becomes dull at velocity of 1.47m/s.

• Ecology and Resilient Infrastructure
• /
• 제1권1호
• /
• pp.29-38
• /
• 2014

본 연구는 식생호안의 안정성 평가에 중요한 인자인 식생 근모량에 따른 식생호안의 전단강도와 침식특성을 분석하였다. 식생호안의 평균근모량은 자체 제작한 채취기를 이용하여 측정하였다. 본 연구에서 사용된 식생은 식생호안에서 다소 우점종인 달뿌리풀이다. 흐름 특성별 실험결과 근모량이 증가함에 따라 토양의 전단강도가 증가함을 확인하였고, 아울러 근모량의 증가에 따라 침식율은 지수함수적으로 감소함을 확인하였다. 식생토양의 전단강도가 증가함에 따라 침식율이 지수함수적으로 감소되어 근모량에 기인한 전단강도의 증가는 침식 저항능력의 증가를 가져왔다. 아울러 근모량에 따른 전단강도와 침식율의 상관분을 실시하여 높은 상관계수를 가진 식을 제시하였다. 식생을 가진 호안의 수리적 안정성에는 근모량의 증가에 의한 전단강도와 유수의 특성인 Froude수에 지배적임을 확인하였다.

• 한국환경복원기술학회지
• /
• 제1권1호
• /
• pp.133-140
• /
• 1998

The following conclusions are based upon data collected and visual observations made during the performance of the tests : 1. The performance of the erosion control products tested was for a particular set of conditions, and may be expected to differ if any or all of the test parameters were to be changed. If even just one parameter is changed from one test to the next, the results can be expected to be different. 2. Due to the fact that only two replications of each product were tested, we believe that the results presented herein are indicative only and not conclusive. 3. The ECB SC produced the least amount of soil erosion followed by ECB S, ECB C, and Coir No. 2, in that order. 4. All of the erosion control blankets tested significantly reduced soil erosion rates with respect to the bare soil controls. 5. The ECB S produced the smallest water runoff rate, followed closely by ECB SC. Next in order were ECB C and Coir No. 2. 6. All of the erosion control blankets reduced the water runoff rate with respect to the bare soil control. 7. Mesh 2cm There was not much difference in plant height for the four erosion control blankets and the bare soil control plots. the ECB S produced slightly taller plants than the rest of the materials tested. 8. The four erosion control blankets(ECB C, ECB SC, ECB S, and Coir No. 2) produced a larger plant mass than the bare soil plots. The difference between the plant mass for the four erosion control blankets, however, is minimal. 9. The ECB C produced the least percentage of lost seed and the largest percentage of germinating seed. 10. The ECB SC had the second smaller percentage of seed lost, followed closely by ECB S, and then by Coir No. 2. 11. All erosion control blankets had a smaller percentage of seed lost than the bare soil control plots. 12. The ECB C had the second largest percentage of germinating seed, followed closely by ECB SC and Coir No. 2. 13. All erosion control blankets had a larger percentage of germinating seed than the bare soil control plots. 14. The ECB C had the smallest percentage of non-germinating seed, followed by ECB S, Coir No. 2, and ECB SC, in that order. 15. All erosion control blankets had smaller percentages of non-germinating seed than the bare soil control plots.

• 해양환경안전학회지
• /
• 제7권3호
• /
• pp.75-84
• /
• 2001

Ultrasonic vibrator is an equipment which atomizes and homogenizes the oils by breaking the oil particles with ultrasonic vibration cavity, and possibly improves the properties. There are various parameters on the effect of ultrasonic irradiation. Especially, this study intended to investigate the matrix structure of sludge oils and the erosion damages for horn disc SS41 according to the variation of the oil temperature and the immersing depth of horn disc. Sludge oils were irradiated with ultrasonic vibration and then observed the aspects of the change of oil particles. From these, the recycling feasibility of sludge oil for useable oil to be burnt was determined. The erosion damages for horn disc SS41 were examined with weight loss, weight loss rate and the irradiation time to max. erosion rate. These data will be useful to the development of ultrasonic breaking systems to recycle sludge oil and to consider a countermeasure for the prevention of erosion damages.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.533-537
• /
• 2004

The erodibility of soil is an important factor to scour, especially in fine-grained soils. In this study, the erosion characteristics of kaolinite are quantified through the scour rate tests using the Erosion Function Apparatus called EFA. The basic soil property tests are also performed. The kaolinite samples are prepared by mixing with distilled water and formed to the designed maximum consolidation pressure of 60, 110, 160, 240, 360kPa, respectively. The results of the scour rate tests are presented in a format of a plot showing the relationship between erosion rates and shear stresses. Erosion properties of kaolinite showed a striking contrast according to the maximum consolidation pressure, and a correlation was established between the erosion properties of kaolinite and the soil properties; water content, undrained shear strength, dry density.