• 한국생활과학회지
• /
• 제24권2호
• /
• pp.255-266
• /
• 2015

In this study, we have developed the ergonomic pattern from the 3D human body reflecting cycling posture and extensibility of the stretch fabrics. Adjusting pressure level in the construction of athlete's tight-fitting stretch garments by reducing the original pattern is a challenging subject, which influence on the performance of the wearer directly. Therefore, in this study, relationships between the reduction rates of the 2D pattern obtained from the 3D human scan and resultant clothing pressure were explored to improve the fit and pressure exerted by reduced clothing pattern. Subjective wear sensations of the experimental garments were rated using a seven-point Likert scale on two consecutive days. While wearing the garments, subjects were asked to take five different postures including waist flexion, sitting and others. A Likert-type scale was used for the evaluation, with 7 points indicating the best fit in tight-fitting pants. Comparing 2/3T-pattern with T-pattern, the latter was superior to 2/3T-pattern in terms of adhere well to the waist and hip area in the 0.032 significance level. T-pattern was superior to 2/3T-pattern in terms of fitting and wear comfort. As results, the pattern obtained from the flexed body reflecting cycling posture already included the contraction and extension of the skin while cycling posture, so that the extra ease for movement and good fit was not need to be considered. The optimized reduction rates were determined with the proposed reduction rate, the resultant pressure range was within the range of $0.5{\sim}3.0gf/cm^2$ at eight locations on the body except front waist band and thigh band.

• 한국전문물리치료학회지
• /
• 제20권1호
• /
• pp.18-27
• /
• 2013

The purpose of this study was to compare the ring lock type knee-ankle-foot orthosis (KAFO) with newly developed 4-bar linkage KAFO on the gait characteristics of persons with poliomyelitis clinically. This 4-bar linkage is the stance control type KAFO which provide the stability during stance phase and knee flexion during swing phase. Two subjects participated in this study voluntarily. We provided the customized 4-bar linkage KAFO then asked the subjects to walk in level surface and stairs under the two different KAFO conditions. The characteristics of gait in the persons with poliomyelitis were evaluated using a 3D motion analysis system and force plate. Additionally 6 minute walk test for physiological cost index were conducted using pulse oximeter to measure the energy consumption. In the results of this study, the differences of 4-bar linkage KAFO compared with ring lock type KAFO are as follows: (1) Walking speed, stride length, and step length on level increased in subjects, (2) The gait symmetry was improved by generated knee flexion and decreased pelvic external rotation on level and stairs walking, (3) Decreased vertical excursion of center of mass and pelvic elevation during swing phase was decreased on level, (4) Knee extension moment, hip flexion moment, hip and knee internal rotation moment of non-braced limb were decreased on level walking, (5) Walking speed in 6-minute walk test was increased and physiological cost index was decreased. These findings indicate that 4-bar linkage KAFO compared with ring lock type KAFO is effective in enhancing pattern, endurance, and energy consumption in level surface and stairs walking.

• 한국전문물리치료학회지
• /
• 제19권2호
• /
• pp.1-11
• /
• 2012

The pelvic compression belt (PCB) contributes to improving sacroiliac joint stability, and it has been used as an additional therapeutic option for patients with sacroiliac joint pain (SIJP). This study aimed to investigate whether the muscle activation patterns of the supporting leg was different between asymptomatic subjects and subjects with SIJP during one-leg standing, and how it changes with the PCB. 15 subjects with SIJP and 10 asymptomatic subjects volunteered to participate in this study. Surface electromyography (EMG) data (reaction time [RT] and muscle activation) were collected from the internal oblique, lumbar multifidius, gluteus maximus and biceps femoris muscles during one-leg standing with and without the PCB. Without the PCB condition, in the SIJP group, the biceps femoris muscle showed the fastest RT among all muscles (p<.05), whereas in the asymptomatic group, the RT of the internal oblique muscle was the most rapid (p<.05). In condition without the PCB, the biceps femoris EMG amplitudes in the SIJP group were significantly greater than that in the asymptomatic group (p<.05). After the application of the PCB, the RT of the biceps femoris muscle was significantly increased only in the SIJP group (p<.05). Moreover, the biceps femoris EMG amplitudes significantly decreased and the gluteus maximus EMG amplitudes significant increased only in the SIJP group by applying the PCB (p<.05). However, this had no such effect on the gluteus maximus and biceps femoris EMG patterns in the asymptomatic group (p>.05). Thus, this study supports the applying the PCB to patients with SIJP can be used as a helpful option to modify the activation patterns of the gluteus maximus and biceps femoris muscle.

• 패션비즈니스
• /
• 제27권6호
• /
• pp.37-46
• /
• 2023

This study aims to develop workwear prototypes by applying a systematic approach considering the characteristics of workwear. A case study was conducted before this study to derive workwear's four characteristics: 'Ergonomic Pattern-Making, Certified Fabric, Specialized Color, and Customized Details.' a prior study proposed the integrated framework combining these characteristics with the FEA model. The new framework identified that these characteristics are considered in terms of functionality, expression, and aesthetics; it can increase workers' satisfaction and meet the market demand without concentrating on only particular aspects. Before prototype production, the requirements for each characteristic of workwear were analyzed through theoretical research of previously published related papers. The study primarily gathered workwear requirements data and sources from consumer satisfaction surveys and investigations into the wearing conditions of work clothes. When considering all aspects of pattern-making, fabric, color, and detail in functionality, 'comfort movement, body protection, improved work efficiency' were identified as necessary. Expressive requirements were fundamental, including 'reflecting the wearer's preferences, expressing a sense of belonging and identity. It was clear that incorporating design elements and applying current trends to the aesthetic requirements of work clothes was necessary. Four prototypes comprised two top and bottom sets and two overalls using these requirements. The framework was used throughout the entire process of planning, producing, and evaluating prototypes, and through this, the results fulfilled the requirements. This study is significant because it produced workwear prototypes using an integrated approach that considered functional, expressive, and aesthetic aspects.

• 한국생활과학회지
• /
• 제19권3호
• /
• pp.555-563
• /
• 2010

With recent advances in 3D scanning technology, three-dimensional (3D) patternmaking is becoming a powerful way to develop garments pattern. This technology is now applicable to the made to measure (MTM) system of both ordinary and tightly fitting garments. Although the pattern of fitted clothing has been developed using 3D human data, it is still interesting to develop cycling pants by considering while-cycling body posture and fabric elasticity. This study adopted the Garland's triangle simplification method in order to simplify data without distorting the original 3D scan. Next, the Runge-Kutta method (2C-AN program) was used to develop a 2D pattern from the triangular pixels in the 3D scanned data. The 3D scanned data of four male, university students aged from 21 to 25, was obtained using Whole body scanner (Model WB4, Cyberware, Inc., USA). Results showed the average error of measurement was $4.58cm^2$ (0.19%) for area and 0~0.61cm for the length between the 3D body scanned data and the 2D developed pattern data. This is an acceptable range of error for garment manufacture. Additionally, the 2D pattern developed, based on the 3D body scanned data, did not need ease for comfort or ease of movement when cycling. This study thus provides insights into how garment patterns may be developed for ergonomic comfort in certain special environments.

• 한국의류학회지
• /
• 제39권2호
• /
• pp.271-286
• /
• 2015

This study presented functional designs for development of functional compression wear for men in their forties based on body muscles as well as designed 2D patterns using 3D standard body form data of men in their forties. Patterns with an optimal stretch rate were proposed through a comfort evaluation. Different material was used for different areas such as the sports ability strengthening areas including body parts that often move for sports (such as the shoulders, abdomen and lower arm), areas that require ventilation for perspiration (such as the chest and back center, and armpits), and stable form areas (such as the chest, waist and elbows). The front and back surface areas of the developed pattern was an average 102.4% size compared to the body surface area. The results indicated that the 90% reduction pattern showed changes in pressure value according to area of movement, had the best breathability when worn, and had the best, most comfortable fit compared to the other subjects. The clothing pressure values of the pattern were around 22.1-23.4mmHg for the arm area (which has a big movement range and has many muscles) and 10.4-11.8mmHg for chest and abdomen areas related to major organs and breathing, indicating appropriate clothing pressure. A compression wear top pattern with pressure appropriate to the target age range and excellent appropriateness for the body form will be developed for men in their forties. A study method will be proposed to develop design technology for ergonomic compression wear tops with excellent fit and comfort.

• 한국생활과학회지
• /
• 제21권3호
• /
• pp.551-565
• /
• 2012

The primary goal of this study was to provide a systematic methodology of utilizing 3D technology for tight-fit performance sportswear using information of skin deformation in various posture. Technical tools used in this study are Cyberware whole body scanner, RapidForm2004, 2C-AN 3D pattern development program, and YukaCAD. Analysis of the 3D skin deformation while knee joint was bent from $0^{\circ}$ to $60^{\circ}$ revealed that the length of dermatomes L4 was remained consistent during knee bending. Therefore, L4 was chosen as a major cutting line. To develop a highly ergonomic pattern, replicas of static and dynamic postures were developed and integrated using two methods, one is morphing method (Sqirlz Morph), and the other is AutoCAD. Experimental tight-fit garments called 'Derm-Mov Pattern' was designed using dematomes L4, L2, and inner line under knee and compared with four other patterns. As results, AutoCAD was appropriate as a integrating method of various postures. In wear test, 'Derm-Mov Pattern' was rated high (p < .001), in terms of pressure comfort especially around front crotch area. However, wear sensation was not signipicantly different in other area due to highly extensible property of materials. Pressure distribution was relatively even in these experimental garments.

• 산업경영시스템학회지
• /
• 제20권41호
• /
• pp.197-201
• /
• 1997

Presses are very used in industrial and commercial companies and are often the source of serious accidents occurring during operation. Most of accidents are due to inadequate design of the press machine. This paper presented an experiment which examined eye movement characteristics of the operators in the press operation. Continuous recordings of eye movements were made on five subjects in press operation. It was observed that the subjects stared longer at the die and did not stare at the switch. The eyemovemen patterns per cycle of the subjects were mostly identified as material container $\rightarrow$ die pattern type. The results could be used as basic data to establish a design guideline when manufacturer made the press machine.

• 대한인간공학회지
• /
• 제26권4호
• /
• pp.33-39
• /
• 2007

In the full white pattern, white uniformity means the degree of uniform distribution of white color and luminance across the whole screen. Among the FPDs(Flat Panel Displays), the TFT-LCD has weak point of viewing angle. The viewing angle considering location and direction can cause different image quality of the TFT-LCD. Therefore, white uniformity of the TFT-LCD must consider viewing angle. Based on international standards, this study proposes an alternative that is realistic and ergonomic measurement of white uniformity of the TFT-LCD.

• Safety and Health at Work
• /
• 제12권3호
• /
• pp.384-389
• /
• 2021

Background: Social distancing by working-from-home is an effective measure to decrease the spread of COVID-19. However, this new work pattern could also affect the well-being of workers. Therefore, the aim of the study was to study the magnitude of occupational health problems and lifestyle changes among workers who have only recently started working from home. Methods: A cross-sectional study was conducted using online self-administered questionnaires during the coronavirus disease 2019 pandemic in the Bangkok metropolitan area, Thailand. The participants were from any organization that allowed working from home. The demographic data including the analysis of the characteristics of working from home, the occurrence of occupational health problems, and the lifestyle changes caused by working from home were analyzed. Results: A total of 869 workers were included as study participants. The highest prevalence of physical health problems among all workers was identified to be weight gain at a rate of 40.97% (95% confidence interval = 37.69-44.24), and the highest prevalence of psychosocial problems was identified to be cabin fever at a rate of 31.28% (95% confidence interval = 26.66-35.90%) among full-time working-from-home workers. The health effects that were significantly related to the intensity of working from home (p for trends <0.05), either positively or negatively, included body weight changes, ergonomic problems, indoor environmental problems, and psychosocial problems. Meanwhile, the lifestyle changes related to work intensity included eating pattern, sleep habits, and exercise. Conclusions: Working from home can affect workers' well-being in various aspects. Hence, occupational health providers must prepare for risk prevention and health promotion in this "new normal" working life pattern and for future pandemics.