• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.711-721
• /
• 2014

PPWS, a large number of which a main cable of a suspension bridge consists of, must be precisely erected at a target location under construction considering the differences among design conditions. The absolute sag is measured for several PPWSs, which are reference strands and the relative sag is surveyed from them to other PPWSs, which are divided into several groups. And the adjustment of PPWS length is performed to erect it at target configuration. When PPWS is being under erection in a real bridge site, the procedures are as follows; evaluate sag sensitivities according to sag variation factors, calculate an adjustment length of PPWS corresponding to them and adjust a sag of PPWS by controlling the calculated amount of PPWS length. In this study, the differential-related equations of sag sensitivity were proposed for support movement of PPWS. Before site demonstration study of a series of them, we established a catenary model system and accomplished verification tests of them. From test results, the validation of them was done.

• Steel and Composite Structures
• /
• v.44 no.1
• /
• pp.33-47
• /
• 2022

This paper presents a finite element model for predicting the monotonic behaviour of bolted endplate joints connecting steel-concrete composite walls and steel beams. The demountable Hollo-bolts are utilised to facilitate the quick installation and dismantling for replacement and reuse. In the developed model, material and geometric nonlinearities were included. The accuracy of the developed model was assessed by comparing the numerical results with previous experimental tests on hollow/composite column-to-steel beam joints that incorporated endplates and Hollo-bolts. In particular, the Hollo-bolts were modelled with the expanded sleeves involved, and different material properties of the Hollo-bolt shank and sleeves were considered based on the information provided by the manufacture. The developed models, therefore, can be applied in the present study to simulate the wall-to-beam joints with similar structural components and characteristics. Based on the validated model, the authors herein compared the behaviour of wall-to-beam joints of two commonly utilised composite walling systems (Case 1: flat steel plates with headed studs; Case 2: lipped channel section with partition plates). Considering the ease of manufacturing, onsite erection and the pertinent costs, composite walling system with flat steel plates and conventional headed studs (Case 1) was the focus of present study. Specifically, additional headed studs were pre-welded inside the front wall plates to enhance the joint performance. On this basis, a series of parametric studies were conducted to assess the influences of five design parameters on the behaviour of bolted endplate wall-to-beam joints. The initial stiffness, plastic moment capacity, as well as the rotational capacity of the composite wall-to-beam joints based on the numerical analysis were further compared with the current design provision.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.6
• /
• pp.863-873
• /
• 2023

This research explores the efficacy of safety vest colors at construction sites to enhance worker safety. Utilizing the Munsell color system and the Korean Standard Color Analysis program(KSCA), the study developed a prototype safety vest tailored to specific types of construction work. A safety vest with a color contrasting the site's environment significantly improves worker visibility and intuitiveness in identification, potentially reducing safety incidents. The study determined the optimal color specifications(hue, value, chroma) for safety vests in various construction roles, such as 10GY, 8, 8 for rebar placement, 8.75B, 7, 8 for Euroform, 3.75B, 2, 4 for Gangform, and 6.25BG, 5, 10 for steel erection. Feedback from construction experts on these prototypes, particularly regarding the safety vests for rebar placement and steel framework, was overwhelmingly positive(90% approval). Consequently, the proposed safety vest color scheme is deemed highly effective.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.6
• /
• pp.511-522
• /
• 2014

In this study, an innovative steel stair system is presented which enables rapid erection and high quality control in both residential and office building construction. This system features two lightweight steel stringers of box shape, bolted connections easy to absorb construction tolerance, and stair steps movable transversely (or sliding steps) such that the work space needed for concrete stairway wall could be easily provided. In this type of stairway system, other than providing robust connecting details, ensuring vibration performance is especially important since this system may be vibration-sensitive due to lightweight nature and/or probable low damping. To tackle these issues, a series of full-scale mock-up tests were conducted by using box-shape stringer members with or without concrete-fill. The connection system was shown to be sufficiently stiff and strong, or it remained elastic even under the 160% of service load level. Among the seven stringer alternatives, five exhibited satisfactory vibration performance according to the related North American and European acceptance criteria.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.3
• /
• pp.225-234
• /
• 2007

This research is based on the purpose of awaking the importance to publicity of terrorism prevention in the environment of neo-terrorism and presenting the direction of effective publicity activities of terrorism prevention in the counter-terrorism system. Government publicity through public media plays a significant role in promoting people's participation and improving the awareness. So, to strengthen the terrorism prevention in environmental changes of terror occurrence, active method available for people must be found as publicity method of terrorism prevention suitable for high information society. For this method, this research argued first about relationship between police organization and public as counter-terrorism system and about effective publicity methods of terrorism prevention through active erection of these relationships. This research suggested the operation method through introduction of e-CRM and etc, with ultimate purpose about maximizing the publicity effect of terrorism prevention by using as the advantage of internet these days as possible. And needs of information service activities and other administration strategies of publicity of terrorism prevention are suggested through enlarging the distribution scope of governmental counter-terrorism information materials by strengthening the national publicity activities and using media.

• Journal of Pharmaceutical Investigation
• /
• v.30 no.3
• /
• pp.173-178
• /
• 2000

The purpose of this work is to develop a transurethral suppository containing prostaglandin $E_1\;(PGE_1)$, which stabilizes the drug, gives no irritation to physiological body and enhances the erectile response of $PGE_1.\;PGE_1$ transurethral suppositories were prepared with various amounts of compositions such as saturated polyglycolysed glyceride $(Suppocire^{\circledR}\;AP,\;SAP)$, polyoxyethylene hydrogenated castor oil (HCO-50) and ethanol. The melting points, viscosities and $PGE_1$ release of the suppositories were investigated. Ocular irritation test was carried out after application of $PGE_1$ suppository to rabbit's eye. The intracavernous pressure (ICP), penile length and duration of erectile response were determined after transurethral administration of $PGE_1$ suppository and compared with those after intracavernosal injection of $PGE_1$ solution to cats. HCO-50 hardly affected the melting points and viscosities of $PGE_1$ suppositories. Additionally, $PGE_1$ transurethral suppositories, whose melting point ranges was $34-35^{\circ}C$, was speedily melted in physiological body. HCO-50 significantly decreased the dissolution rates of $PGE_1$ from the suppositories. Dissolution mechanism analysis showed the release of $PGE_1$ was proportional to the square root of time, indicating that $PGE_1$ might be released from the suppositories by Fickian diffusion. The release rate of $PGE_1$ from $PGE_1$ suppository [PGE1/SAP/HCO-50/ethanol (1/94.5/2.5/2%)] was about 80% within 2 h. This $PGE_1$ suppository gave no significant irritation to the ocular tissue, expecting that it gave no irritation to the urethral tissue less sensive than ocular tissue. Furthermore, $PGE_1$ in this suppository was stable at $4^{\circ}C$ for 2 years. This suppository increased the ICP and penile erection similar to those of injectable $PGE_1$ solution. However, it gave 2.5-fold increased duration of erectile response than injectable $PGE_1$ solution. Our results suggested that it gave more effective erectile response than injectable $PGE_1$ solution in cats. It is concluded that this $PGE_1$ suppository with good safety, excellent stability and enhanced erectile response, could be a more effective and convenient transurethal delivery system of $PGE_1$.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.2
• /
• pp.86-109
• /
• 2009

Mireuksa Temple was founded during the reign of King Mu of Baekje(AD 600-641). The circumstance of the construction of this temple is documented in "Memorabilia of the Three Kingdoms (Samgukyusa)". The pagoda named stone pagoda at Mireuksaji temple stands outside the main sanctuary of the western area. The south and west sides of the stone pagoda have completely collapsed, leaving only the eastern facade of six of its levels intact. Through the recent discovery of sarira reliquary we can see that the erection of this pagoda was in 639. So owing to accumulation of excavation results about Baekje temple site and vigorous academic exchange, it is possible that architecture of western pagoda at Mireuksaji temple can be understood in connection with the architectural development of wooden pagoda from 6th to early 7th century in East Asia. So this study is on the consideration of building of this pagoda putting first structure of upper part and cross-shaped space in 1st floor. It was considered that the material characteristics as stone could be applied to the temple pagoda architecture of large scale. The results are as follows. First, it had been built in recognition that the outer and inner part of pagoda should be separated. As it is the expression of structural system in temple pagoda architecture of large scale at that time. In pagoda there was a self-erected structure and the members of outer part of it were constructed additionally. Second, in Mireuksaji stone pagoda there is central column with stones. With inner part of pagoda it can be regarded as mixed structural system that constitutes central contral column and inner structural part. And it could be a kind of middle step to more developed structure of whole as wooden pagodas in Japan. Third, as the sarira reliquary was in central column on the first floor, the cross-shaped space could be made. The formation of this space was so on the natural meaning of sarira that the concept as memorial service of graves could be apllied to the pagoda. The style of tomb in Baekje was expressed to the space of 1st floor in pagoda where Sarira had been mstalled. That was not only effective presentation of symbolic space but also easier method in the use of same material.

• Journal of Ginseng Research
• /
• v.23 no.1 s.53
• /
• pp.13-20
• /
• 1999

We previously reported that Korean red ginseng (KRG) has a relaxation effect on the smooth muscles of corpus cavernosum via nitric oxide (NO) pathway and calcium and potassium channels. However, it is suggested that the active ingredients of KRG might be different depending on the sources of preparation, and there might be differences in actions for different compositions. We first investigated the composition of KRG saponins according to the extractions of the various sources of KRG, then with these extractions the relaxation effects were evaluated in vitro and hemodynamical in vivo using New Zealand white rabbit and rat corpus cavernosum. The total compositions of ginsenoside $(G-Rb_1,\;-Rb_2,\;-Rc,\;-Rd,\;G-Re,\;-Rf,\;-Rg_1)$ in fractionated KRG saponin designated as TS-1, TS-2, TS-3 were $41\%,\;40\%,\;and\;62\%,$ respectively, and the ratios of PD saponin and PT saponin (PD/PT) were 1,55, 1.72, 2.25, and 2.61, the values of which were statistically significant. In vitro studies using the rabbit corpus cavernosal muscle strips, the KRG saponin relaxed cavernosal strips in a dose-dependent manner, and same results were observed in in vivo studies, that KRG saponin increased the intracavernosal pressure in the rat. There was difference in the efficacy according to fractionation techniques. The differences in the total contents of ginsenosides did not affect relaxation, rather PT saponin content was statistically related to the degree of cavernosal relaxation, and this action presumed to be mediated by NO pathway and calcium and potassium channels. In conclusion, KRG exerts relaxation which is a key step in erection via combination of effects on NO system or calcium and potassium channels. The efficacy of this action is different to the sources of ginseng, which is affected by the different composition of ginsenosides $(G-Rb_1,\;-Rb_2,\;-Rc,\;-Rd,\;G-Re,\;-Rf,\;-Rg_1).$ Thus the further studies on the active ingredients such as minor ginsenosides and non-saponin components of red ginseng with maximum potency should be sought.