• Title/Summary/Keyword: Er-doped fiber

Search Result 41, Processing Time 0.029 seconds

Simultaneous Measurement of Strain and Temperature by use of Fiber Bragg Grating Written in an Erbium: Ytterbium-Doped Fiber (단일 광섬유 격자와 Erbium과 Ytterbium 첨가된 광섬유를 이용한 스트레인 및 온도의 동시 측정)

  • Jung, Jae-Hoon
    • Journal of IKEEE
    • /
    • v.8 no.1 s.14
    • /
    • pp.117-120
    • /
    • 2004
  • We demonstrate a fiber-optic sensor scheme, capable of the simultaneous measurement of strain and temperature using a single fiber Bragg grating written in an erbium: ytterbium-doped fiber. This novel and compact fiber grating based sensor scheme can be used for synchronous measurement of strain and temperature over ranges of $1100\;{\mu}{\varepsilon}$ and $50-180\;^{\circ}C$ with rms errors of $55.8\;{\mu}{\varepsilon}$ and $3^{\circ}C$, respectively. The simple and low-cost sensor approach has a considerable potential, particularly for wide-range strain sensing applications in which high resolution is not required.

  • PDF

Improvement of $^{4}I_{11/2}{\to}^{4}I_{13/2}$ Transition Rate and Thermal Stabilities in $Er^{3+}-Doped\;TeO_2-B_2O_3\;(GeO_2)-ZnO-K_2O$ Glasses

  • Cho, Doo-Hee;Choi, Yong-Gyu;Kim, Kyong-Hon
    • ETRI Journal
    • /
    • v.23 no.4
    • /
    • pp.151-157
    • /
    • 2001
  • Spectroscopic and thermal analysis indicates that tellurite glasses doped with $B_2O_3$ and $GeO_2$ are promising candidate host materials for wide-band erbium doped fiber amplifier (EDFA) with a high 980 nm pump efficiency. In this study, we measured the thermal stabilities and the emission cross-sections for $Er^{3+}:^{4}I_{13/2}\;{\to}\;^{4}I_{15/2}$ transition in this tellurite glass system. We also determined the Judd-Ofelt parameters and calculated the radiative transition rates and the multiphonon relaxation rates in this glass system. The 15 mol% substitution of $B_2O_3$ for $TeO_2$ in the $Er^{3+}-doped\;75TeO_2-20ZnO-5K_2O$ glass raised the multiphonon relaxation rate for $^4I_{11/2}\;{\to}\;^4I_{13/2}$ transition from 4960 $s^{-1}$ to 24700 $s^{-1}$, but shortened the lifetime of the $^4I_{13/2}$ level by 14 % and reduced the emission cross-section for the $^4I_{13/2}\;{\to}\;^4I_{15/2}$ transition by 11%. The 15 mol% $GeO_2$ substitution in the same glass system also reduced the emission cross-section but increased the lifetime by 7%. However, the multiphonon relaxation rate for $^4I_{11/2}{\to}^4I_{13/2}$ transition was raised merely by 1000 $s^{-1}$. Therefore, a mixed substitution of $B_2O_3$ and $GeO_2$ for $TeO_2$ was concluded to be suitable for the 980 nm pump efficiency and the fluorescence efficiency of $^4I_{13/2}{\to}^4I_{15/2}$ transition in $Er^{3+}-doped$ tellurite glasses.

  • PDF

Theoretical analysis improved cavitity design of a 10 GHz harmonically mode-locked Er-doped fiber laser (10GHz로 고조모드록킹된 고리형 어븀첨가 광섬유 레이저의 이론적 해석 및 향상된 공진기 설계)

  • 이유승
    • Korean Journal of Optics and Photonics
    • /
    • v.11 no.5
    • /
    • pp.353-359
    • /
    • 2000
  • A harmonically mode-locked fiber ring laser cavlty was theoretically analyzed. The measured charactenstlcs of a 10 GHz erbium-doped fiber ring laser were used as a basis of the theoretical analysis. From the nonlinear Schroedinger equation of an actively mode-locked erblUm-doped fiber laser. the effects of the components inside the laser cavity have been analyzed includmg nonlinear effects from group-velocity dispersion (GVD) and self-phase modulation (SPM). Usmg the analysls. we have designed a laser cavity with minimum pulsewidth and chirp by changing the intracavity optical intensity and the bandwidth of the filter. In the new design, the chirp i, reduced by 2 times and the pulsewidth by 2A times. compared to the laser used in the experiment. iment.

  • PDF

Tunable Er$^{3+}$ dopsd Fier DFB Laser (파장 가변 어븀 첨가 광섬유 DFB 레이저)

  • Yoon, Hong;Cho, Kyu-Man;Lee, Sang-Bae;Kim, Sang-Hyuk;Choi, Sang-Sam
    • Korean Journal of Optics and Photonics
    • /
    • v.11 no.6
    • /
    • pp.429-433
    • /
    • 2000
  • A study of the tunable fiber DFB laser using PZT-stretcher is presented. The device has an laser ocsillator by using a fiber Bragg grating at 1559.4 nm written directly into a 3-cm long $Er^{3+}$ doped fiber. Post UV-exposure method to provide the necessary phase shift is used for a single mode operation. The device shows the single mode operation of $230\muW$ output power and has a narrow linewidth of 35 kHz. The lasing wavelength of the laser can be tuned in a range of 3 nm by stretching the grating.rating.

  • PDF

Characteristics of $Er^{3+}$ Doped Fiber Source with an optical isolator for Fiber Optic Gyroscope (Optical isolator 삽입에 따른 자이로스코프용 $Er^{3+}$ 첨가 광섬유광원의 특성)

  • Seo, Dae-Dong;Jo, Jun-Yong;Lee, Jae-Cheol;Gwon, O-Seon;Jo, Min-Sik
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2007.02a
    • /
    • pp.215-216
    • /
    • 2007
  • Isolator가 삽입된 Erbium 첨가 광섬유광원을 제작하였고 그 특성을 측정하였다. Isolator 삽입 유무에 따른 광섬유광원의 전 온도구간($-32^{\sim}75^{\circ}C$)에서의 중심파장 안정도는 수 ppm으로 큰 차이를 보이지 않았고, 귀환광 변화($-22^{\sim}-20dB$)에 따른 중심파장 안정도에서는 isolator 삽입이후에 1.6ppm으로 귀환광 변화에 매우 둔감한 결과를 얻었다.

  • PDF

$^4I_{13/2}longrightarrow^4I_{15/2}$ Radiative Transitions of $Er^{3+}$ in $CaO-Al_2O_3$ Glasses ($CaO-Al_2O_3$계 유리에 함유된 $Er^{3+}$ 이온의 $^4I_{13/2}longrightarrow^4I_{15/2}$ 복사 천이 특성)

  • 원종원;박용완
    • Journal of the Korean Ceramic Society
    • /
    • v.31 no.8
    • /
    • pp.861-868
    • /
    • 1994
  • CaO-Al2O3 glass is a good candidate as optical fiber amplifier and laser. In this study, optical properties for 4I13/2longrightarrow4I15/2 transition of Er3+ ions doped in CaO-Al2O3 glasses were investigated. Optical absorptions, radiative transition probabilities and lifetimes for 4I13/2 level were evaluated by using Judd-Ofelt theory. Also, induced- emmision cross-sections of 4I13/2longrightarrow4I15/2 transition were calculated. Radiative transition probability and lifetime of 4I13/2 level were 144.6s-1, 690$mutextrm{s}$ respectively for 60CaO.40Al2O3 glass(FS0) and 152.6s-1, 660 $mutextrm{s}$ for 54 CaO.36Al2O3.10SiO2 glass (FS10). Each induced-emission cross sections for FS0 and FS10 was 0.749$\times$10-20 $\textrm{cm}^2$, 0.892$\times$10-20 $\textrm{cm}^2$. Obtained values were comparable with those of ZBLA glass studied as optical fiber amplifier and laser material.

  • PDF

Single-longitudinal-mode unidirectional fiber laser using fiber Bragg grating (광섬유 브래그 격자를 이용한 단일 종모드 단방향 광섬유 레이저)

  • 이정찬;전영민;김명욱;김봉규;이상배;김상국;최상삼;이상선
    • Korean Journal of Optics and Photonics
    • /
    • v.10 no.3
    • /
    • pp.233-236
    • /
    • 1999
  • We have constructed a narrow-linewidth single-longitudinal-mode unidirectional $Er^{3+}$ -doped fiber laser using a fiber Bragg grating incorporated by a three port optical circulator with a compact configuration. Using a conventional delayed self-heterodyne detection technique with Mach-Zehnder interferometer a linewidth of 5 kHz was measured. In a single-longitudinal-mode operation, output power of up to 2.7 mW at 1548 nm were obtained for a launched pump power of 43 mW at 980 nm.

  • PDF

A Study on the Passive Modelocking of Ring Type Er-doped Fiber laser (고리형 어븀첨가 광섬유 레이저의 수동형 모드로킹에 관한 연구)

  • 한두희
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.1 no.2
    • /
    • pp.63-68
    • /
    • 2000
  • A passively mode-locked ring type fiber laser had been installed in order to get the short pulses The single and the double mode-locking were appeared, and the shortest pulse length of 65 fs was obtained with a 110 m long dispersion shifted fiber(DSF) in a local cavity of 139.8 m. Also high order harmonic modelocking of 17th and Q-switched high order harmonic modelocking were obtained.

  • PDF

Widely Tunable Single-Frequency Er-doped Fiber Linear-Cavity Laser (파장 가변 단일 주파수 어븀 첨가 광섬유 선형 공진기 레이저)

  • 장순혁;용재철;김병윤
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2000.02a
    • /
    • pp.234-235
    • /
    • 2000
  • 1.55$mu extrm{m}$의 파장 영역에서 동작하는 파장 가변 단일 주파수 레이저는 파장 분할 방식(WDM) 광통신 시스템, 분광학 또는 광센서 등에서의 응용 가능성을 가지고 있다. 특히, 파장 가변 단일 주파수 광섬유 레이저는 선폭이 좁고, 세기 잡음이 작으며, 출력 파워가 큰 한편, 광섬유로의 집적이 간단하다는 등의 장점을 가지고 있어 이에 관한 많은 연구가 이루어지고 있다. 본 논문에서는 주파수 변환기와 광섬유 흡수 격자를 이용하여 긴 길이의 선형 공진기에서 구현된 파장 가변 단일 주파수 어븀 첨가 광섬유 레이저의 동작에 관하여 기술하였다. (중략)

  • PDF