• Ocean Systems Engineering
• /
• 제2권2호
• /
• pp.147-158
• /
• 2012

A time-domain simulation of a land-based Oscillating Water Column (OWC) with various irregular waves as a form of PM spectrum is performed by using a two-dimensional fully nonlinear numerical wave tank (NWT) based on the potential theory, mixed Eulerian-Lagrangian (MEL) approach, and boundary element method. The nonlinear free-surface condition inside the OWC chamber was specially devised to describe both the pneumatic effect of the time-varying pressure and the viscous energy loss due to water column motions. The quadratic models for pneumatic pressure and viscous loss are applied to the air and free surface inside the chamber, and their numerical results are compared with those with equivalent linear ones. Various wave spectra are applied to the OWC system to predict the efficiency of wave-energy take-off for various wave conditions. The cases of regular and irregular waves are also compared.

• 한국군사과학기술학회지
• /
• 제8권4호
• /
• pp.120-129
• /
• 2005

To analyze a blast effect of developed explosives, three different kinds of aluminized tastable explosives and melted cast explosive TNT were used. Conventional explosive TNT was used as a reference. Each tested explosive charge of 340mm diameter spherical type was initiated at the charge center with DXD-65(${\sim}750g$) booster and RP-87 EBW detonator. Thirteen piezo type pressure sensors were located at a range from 4 to 50m away from the charge. From the blast wave profiles, we calculated a peak blast pressure and impulse of the explosion. The calculated pressures and in pulses were converted to TNT Equivalent Weight(TEW) factor by the scaling ]aw method. The average TEW factors based on the blast pressure of TX-01, TX-02, TX-03, TX-04 were 1.298, 1.05, 1.266, 1.274 and the average TEW factors based on impulse were 1.504, 1.686, 1.640, 1.679. From the results, we concluded that TEW factors based on blast pressure and based on impulse of aluminized explosives were superior to TNT. This results are owing to the high contents of aluminum in formulations.

• 한국소음진동공학회논문집
• /
• 제12권4호
• /
• pp.280-286
• /
• 2002

It has been long suspected that the transition region may give rise to local pressure fluctuations and radiated sound that are different from those created by the fully-developed turbulent boundary layer at equivalent Reynolds number. Experimental investigation described in this paper concerns the characteristics of pressure fluctuations at the transition. Flush-mounted microphones and hot wires are used to measure the pressure fluctuations and local flow velocities within the boundary layer in the low noise wind tunnel. From this experiment we could observe the spatial and temporal development process of T-S wave using Wigner-Ville method and find the relations between the characteristic frequency of T-S wave and free stream velocity and the boundary layer thickness based on nondimensional pressure spectra scaled on outer variables.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.811-816
• /
• 2000

It has been long suspected that the transition region may give rise to local pressure fluctuations and radiated sound that are different from those created by the fully-developed turbulent boundary layer at equivalent Reynolds number. Experimental investigation described in this paper concerns the characteristics of pressure fluctuations at the transition. Flush-mounted microphones and hot wires are used to measure the pressure fluctuations and local flow velocities within the boudary layer in the low noise wind tunnel. From this experimental we could observe the spatial and temporal development process of T-S wave using Wigner-Ville method and found the possibility of relation between the characteristic frequency of T-S wave and free stream velocity and the boundary layer thickness based on nondimensional pressure spectra scaled on outer variables.

• 대한기계학회논문집B
• /
• 제20권12호
• /
• pp.4036-4043
• /
• 1996

When a high-speed railway train enters a tunnel, a compression wave is generated ahead of the train and propagates along the tunnel, compressing and accelerating the rest air in front of the wave. At the exit of the tunnel, an impulsive wave is emitted outward toward the surrounding, which causes a positive impulsive noise like a kind of sonic boom produced by a supersonic aircraft. With the advent of high-speed train, such an impulsive noise can be large enough to cause the noise problem, unless some attempts are made to alleviate its pressure levels. In the purpose of the impulsive noise reduction, the present study tested the effect of porous walls on the compression wave propagating into a model tunnel. Experimental results were obtained using a shock tube with an open end. The results showed that the cavity/porous wall is very effective for the compression wave with a large nonlinear effect. The porosity of 30% is most effective for attenuation and pressure gradient reduction of the compression wave front. Also the impulsive noise reduction increases with increasing the length and height of the cavity, compared with the tunnel equivalent diameter.

• 한국해안·해양공학회논문집
• /
• 제21권6호
• /
• pp.508-517
• /
• 2009

해상방파제 축조공사 시공 중 내습파랑에 노출하여 거치된 케이슨의 실제 거동상황을 계측하였다. 계측결과 설계하중대로 선행재하를 실시함에 따라 더는 침하가 발생하지 않을 것으로 예측하였으나, 이후 평상시는 별다른 거동이 없다가 태풍영향권 파랑이 내습 시에 갑작스런 이상침하가 전체구간에서 현저하게 발생한 것이 계측되었다. 이러한 원인을 규명하고자 같은 시각 내습한 파랑자료로 연구지점의 파고를 재현하여 케이슨에 작용하는 등가파압을 구하고 하부기초지반에 미치는 영향을 수치해석으로 검토하였다. 현장 계측 치와 수치해석 값이 상호 양호한 일치성을 보이는 것으로 나타났다.

• Current Optics and Photonics
• /
• 제1권5호
• /
• pp.529-537
• /
• 2017

We explored how changes in blood vessel compliance affected the systolic rise time (SRT) of the maximum blood pressure (BP) peak wave and the diastolic fall time (DFT) of the minimal BP peak wave, compared to photoplethysmograpic (PPG) parameters, using a two-compartment, second-order, arterial Windkessel model. We employed earlier two-compartment Windkessel models and the components thereof to construct equivalent blood vessel circuits, and reproduced BP waveforms using PSpice technology. The SRT and DFT values were obtained via circuit simulation, considering variations in compliance (the dominant influence on blood vessel parameters attributable to BP changes). And then performed regression analysis to identify how compliance affected the SRT and DFT. We compared the SRTs and DFTs of BP waves to the PPG values by reference to BP changes in each subject. We confirmed that the time-shift propensities of BP waves and the PPG data were highly consistent. However, the time shifts differed significantly among subjects. These simulation and experimental results allowed us to construct an initial trend curve of individual BP peak time (measured via wrist PPG evaluations at three arm positions) that facilitated accurate individual BP estimations.

• 대한조선학회논문집
• /
• 제40권3호
• /
• pp.22-28
• /
• 2003

In rough seas, bow-flare regions of the full ships (tanker and bulk carrier) are subiect to high impact pressures due to the on-coming breaking waves. And many ships suffer structural damages in that region, even though they were built under the bow structure strengthening rules of the ship classes. So, a new design method for bow-flare structure is highly required. In this paper, a new prediction method of the bow-flare impact pressure (in terms of equivalent static pressure) acting on the full ships' bow is presented. This method is based on the 6 full ships' damage analysis and the breaking wave impact mechanism. Calculation results of the bow-flare impact pressure and the shell plate thickness are shown and discussed. Through the example calculations, it was found that the present method is useful for the structure design of the full ships' bow.

• 한국항해항만학회지
• /
• 제36권9호
• /
• pp.729-735
• /
• 2012

The primary wave energy conversion by a three-dimensional bottom-mounted oscillating water column (OWC) wave power device in regular waves has been studied. The linear potential boundary value problem has been solved following the boundary matching method. The optimum shape parameters such as the chamber length and the depth of the front skirt of the OWC chamber obtained through two-dimensional numerical tests in the frequency domain have been applied in the design of the present OWC chamber. Time-mean wave power converted by the OWC device and the time-mean second-order wave forces on the OWC chamber structure have been presented for different wave incidence angles in the frequency-domain. It has been shown that the peak period of $P_m$ for the optimum damping parameter coincides with the peak period of the time.mean wave drift force when ${\gamma}=0$.

• 한국지진공학회논문집
• /
• 제11권2호
• /
• pp.81-94
• /
• 2007

지진시 발생하는 지반 액상화 현상은 지진피해예측시 가장 중용하게 평가해야 하는 항목으로 실내에서 액상화 현상을 시뮬레이션하는 경우, 불규칙성의 지진을 제어하기 어려운 이유로 등가반복형태의 정현파 또는 쐐기파를 이용하는 것이 통상적이었다. 그러나, 90년대 이후 컴퓨터의 발달과 함께한 신호처리 및 제어기술의 급속한 발전은 동역학분야에서의 실험연구에 큰 도움을 주었으며 지반진동분야의 경우, 진동대 및 원심모형기와 같은 대형지진모의시험에서 실지진하중을 이용한 연구사례들이 증가되고 있는 실정이다. 국내에서도 실지진하중재하가 가능한 요소시험결과에 대한 연구사례가 발표되는 등 이에 관한 연구가 활발하게 진행되고 있으며 특히, 실지진하중 시험결과로부터 실지진하중하에서의 과잉간극수압의 변화가 정현하중시험에서의 결과와 큰 차이를 보이고 있다는 분석결과가 발표되어 현재까지 지반동역학분야에서 지진하중의 불규칙성을 크게 고려하지 않았던 통상적 가정사항들이 문제점으로 대두되어 관심을 집중시키고 있다. 본 연구에서는 등가의 정현파 및 쐐기파와 증가형태의 쐐기파, 그리고 실지진파 등 다양한 진동하중을 재하할 수 있는 삼축압축시험기를 이용하여 기존의 유효응력개념에서 사용하는 과잉간극수압관련 매개변수인 소성일, 전단소성 변형률 상각궤도, 그리고 액상화 상태전환선의 기울기를 비교분석하였으며 하중변화에 따른 토립자의 변형과 간극수압의 변화를 상세분석하였다. 연구결과, 토립자의 변형, 간극수의 동적흐름, 동적흐름 속도수두의 압력수두로의 전환, 그리고 과잉간극수압의 증가로 표현되는 새로운 개념의 액상화 발생이론을 제안하였으며 그 타당성 검토를 위해 과잉간극수압과 동적흐름의 압력수두(흐름속도의 제곱값)와의 상관관계를 비교하였다.