• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.7
• /
• pp.1047-1052
• /
• 2017

In this paper, the calculation torque using the d-q axis has advantage like faster execution time. However, the torque ripple can't be considered in the torque calculation using d-q axis equivalent circuit because the time-dependent component is removed. When d-q transformation was performed, it was founded that some parameters has some characteristics. These characteristics were considered for representing torque ripple. The calculation with d-q axis transformation and Finite Element Analysis(FEA) were performed, and the results were compared. As a result, it was validated that the calculated torque can be expressed with ripple.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1514-1519
• /
• 2003

This paper presents modeling and analysis of static and dynamic characteristics in three phase PWM Boost AC-AC converter used for input voltage sag compensation of custom power. Especially, using circuit DQ transformation technique, an equivalent circuit in fundamental frequency domain is obtained which has all the system characteristics. Moreover, voltage gain and input power factor is analytically induced and linearized state equation at the specific operating point is given. Finally, PSIM simulation results show the validity of the Nosed modelling and analyses.

• Journal of Mechanical Science and Technology
• /
• v.19 no.7
• /
• pp.1460-1468
• /
• 2005

Two possible shape memory processes, austenite to detwinned martensite transformation and twinned martensite to detwinned martensite transformation of a shape memory alloy have been modeled and examined. Eshelby's equivalent inclusion method with Mori-Tanaka's mean field theory is used for modeling of the shape memory processes of TiNi shape memory alloy reinforced aluminum matrix composite. The shape memory amount of shape memory alloy, plastic strain and residual stress in the matrix are computed and compared for the two processes. It is shown that the shape memory amount shows differences in a small prestrain region, but the plastic strain and the residual stress in the matrix show differences in the whole prestrain region. The shape memory process with initially martensitic state of the shape memory alloy would be favorable to the increase in the yield stress of the composite owing to the large compressive residual stress and plastic strain in the matrix.

• East Asian Economic Review
• /
• v.23 no.3
• /
• pp.285-309
• /
• 2019

Unlike the popular belief, digital transformation mainly gets stymied by legal and regulatory issues related with legacy institutions in Asia rather than technical difficulties. The real challenges triggered by the PSD2 (Payment Services Directive 2) are how the region would overcome the overly fragmented, centralized, and hierarchical legacy framework to allow necessary changes to respond to the digital single market initiatives as promulgated by the European counterpart. The PSD2 is expected to bring about substantial changes in the payment ecosystem by allowing payment service providers to access customers' accounts and transactions information via API that have been traditionally controlled by banks. This paper suggests an incentive-compatible mechanism design for open collaboration among legacy institutions in the region to help them adapt to the PSD2. As evidenced by case studies in Korea, the Asian equivalent of PSD2 can be implemented and further expanded to create region-wide PCS (payment-clearing-settlement) network by reconnecting the dots of legacy infrastructures. These decentralized, diverse, small payment networks can be further combined with the expanded RTGS-CDS platform to evolve into the next phase of Asian Financial Network.

• The KIPS Transactions:PartD
• /
• v.14D no.2
• /
• pp.157-168
• /
• 2007

For effective analyses in various business applications, OLAP(On-Line Analytical Processing) systems represent the multidimensional data as the horizontal format of tables whose columns are corresponding to values of dimension attributes. Because the traditional RDBMSs have the limitation on the maximum number of attributes in table columns(MS SQLServer and Oracle permit each table to have up to 1,024 columns), horizontal tables cannot be directly stored into relational database systems. In this paper, we propose various efficient optimization strategies in transforming horizontal queries to equivalent vertical queries. To achieve this goral, we first store a horizontal table using an equivalent vertical table, and then develop various query transformation rules for horizontal table queries using the PIVOT operator. In particular, we propose various alternative query transformation rules for the basic relational operators, selection, projection, and join. Here, we note that the transformed queries can be executed in several ways, and their execution times will differ from each other. Thus, we propose various optimization strategies that transform the horizontal queries to the equivalent vertical queries when using the PIVOT operator. Finally, we evaluate these methods through extensive experiments and identify the optimal transformation strategy when using the PIVOT operator.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.1
• /
• pp.41-52
• /
• 1992

An algorithm of transforming continuous-time state feedback gains into equivalent discrete-time feedback gains or vice versa is proposed using bilinear transformation. The proposed method is evaluated experimentally by an application control of a mobile crane system which is implemented by 16bits micro computer with A/D and D/A converters. It has been shown from the experimental result that the transformed feedback gains are virtually identical to the optimal discrete gain over range of significant sampling time. Since the transformed matrix is composed by a distinct relationship between continuous-time gain and discrete-time gain, it is noted that the proposed method can be regarded as an explicit gain transformation method compared to the other methods using series expansion.

• Structural Engineering and Mechanics
• /
• v.68 no.4
• /
• pp.423-442
• /
• 2018

In this paper, masonry infilled reinforced concrete (RC) frames are analyzed through a probabilistic approach. A macro-modeling technique, based on an equivalent diagonal pin-jointed strut, has been resorted to for modelling the stiffening contribution of the masonry panels. Since it is quite difficult to decide which mechanical characteristics to assume for the diagonal struts in such simplified model, the strut width is here considered as a random variable, whose stochastic characterization stems from a wide set of empirical expressions proposed in the literature. The stochastic analysis of the masonry infilled RC frame is conducted via the Probabilistic Transformation Method by employing a set of space transformation laws of random vectors to determine the probability density function (PDF) of the system response in a direct manner. The knowledge of the PDF of a set of response indicators, including displacements, bending moments, shear forces, interstory drifts, opens an interesting discussion about the influence of the uncertainty of the masonry infills and the resulting implications in a design process.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.6
• /
• pp.61-70
• /
• 2003

In this paper, a transcoding algorithm for the Selectable Mode Vocoder (SMV) and the G.723.1 speech coder via direct parameter transformation is proposed. In contrast to the conventional tandem transcoding algorithm, the proposed algorithm converts the parameters of one coder to the other without going through the decoding and encoding process. The proposed algorithm is composed of four parts: the parameter decoding, line spectral pair (LSP) conversion, pitch period conversion, excitation conversion and rate selection. The evaluation results show that the proposed algorithm achieves equivalent speech quality to that of tandem transcoding with reduced computational complexity and delay.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.3
• /
• pp.31-36
• /
• 2006

In this study, nonlinear static aeroelastic analysis system for a high-aspect-ratio wing are developed using the transonic small disturbance (TSD) and large deflection beam theory and validated. For the coupling between fluid and structure, the transformation of displacement from the structural mesh to aerodynamic one is performed by the shape function of the beam finite element and the inverse transformation of force by work equivalent load concept. Also, for the static aeroelastic analysis of the wing the use of TSD aerodynamics are justified. The validation of the system includes one of the efficient transformation methods of force and displacement.

• Communications of the Korean Mathematical Society
• /
• v.30 no.3
• /
• pp.253-267
• /
• 2015

Given a complex submanifoldM of the projective space $\mathbb{P}$(T), the hyperplane system R on M characterizes the projective embedding of M into $\mathbb{P}$(T) in the following sense: for any two nondegenerate complex submanifolds $M{\subset}\mathbb{P}$(T) and $M^{\prime}{\subset}\mathbb{P}$(T'), there is a projective linear transformation that sends an open subset of M onto an open subset of M' if and only if (M,R) is locally equivalent to (M', R'). Se-ashi developed a theory for the differential invariants of these types of systems of linear differential equations. In particular, the theory applies to systems of linear differential equations that have symbols equivalent to the hyperplane systems on nondegenerate equivariant embeddings of compact Hermitian symmetric spaces. In this paper, we extend this result to hyperplane systems on nondegenerate equivariant embeddings of homogeneous spaces of the first kind.