• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.1084-1096
• /
• 2023

On-the-fly(OTF) generation of Spectral Superhomogenization(SSPH) factors is analyzed in the multigroup(MG) whole core calculation employing pin-wise continuous energy(CE) slowing-down solutions. The motivation for the work is to avoid the huge computing time required for the generation of a parametrized SSPH factor library(PSSL) which is used to resolve the angular dependency of MG resonance cross sections, and also to exploit the advantage of flexible choice of a MG structure by using CE slowing-down solutions. Two pin-wise CE slowing-down methods, the equivalent Dancoff cell method and the shadowing effect correction method, are evaluated with the OTF SSPH method. The effectiveness of the OTF SSPH method is examined for various simplified and realistic core problems with various MG structures. It is demonstrated that the computing time overhead of this method is negligible whereas the solution accuracy is considerably enhanced.

• 한국지반공학회논문집
• /
• 제18권2호
• /
• pp.13-21
• /
• 2002

본 연구에서는 교각주위에 발생하는 국부세굴깊이를 예측하기 위한 5-SRICOS 방법을 제안하였다. 교각주위의 시간에 따른 세굴깊이 변화곡선을 예측하기 위해 SRICOS 방법이 개발된 바 있다. 이는 흙의 특성에 기초한 시간효과와 수리학적 매개변수를 동시에 고려할 수 있으며, SRICOS프로그램을 사용하여 실제의 수문곡선과 다층지반구조를 처리할 수 있는 방법이다. 5-SRICOS 방법은 이 SRICOS 방법의 단순화된 형태이다. 수계산만으로 세굴깊이를 예측할 수 있도록 SRICOS 방법을 단순화시키는 시도가 이루어졌으며, 그 결과 5-SRICOS 방법에서는 단지 교각폭, 교량 설계빈도, 설계유속, 흙의 초기 세굴속도와 같은 4가지 매개변수만이 요구된다. 5-SRICOS 방법은 SRICOS 방법을 사용하여 계산된 55개의 세굴깊이에 적용하여 검증되었다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권5호
• /
• pp.568-576
• /
• 2017

With an increase in the usage of LNG, there is a heightened interest about its safety aspects regarding the explosion of LNG carrier tank. The need for a cryogenic explosion-proof camera has increased. The camera has to work in cryogenic environment (below $-160^{\circ}C$) in LNG carrier. This study conducted design and heat transfer analysis of cryogenic camera to secure working time in limitation of heat source. The design with gap width of double pane windows was conducted based on simple vertical cavity model to insulate from cryogenic environment. The optimal gap width was 12.5 mm. For effective analysis considering convection within the camera, equivalent thermal conductivity method was adopted with ABAQUS. The working time of the camera predicted was over 10 h at warm-start condition. In cold-start condition, it required about 5 h of pre-warming time to work. The results of analysis were compared with the ones of the actual cryogenic test.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.237-239
• /
• 2018

This paper proposes an on-line estimation algorithm of internal resistance of Li-ion battery based on the recursive least squares method to prevent the overvoltage and undervoltage casing degradation of life cycle of battery. An equivalent circuit model with single time constant is adopted, and under assumptions that the terminal voltage, current and SOC are measured accurately, the discrete time based nonlinear equation of the model can be converted to the linear equation which can be applied to recursive least squares method. Since the coefficients of the discrete time linear equation can be expressed by the parameters of the equivalent circuit model, it is shown that an internal resistance (Ri) can be estimated in real time using the least square method.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권6호
• /
• pp.306-314
• /
• 2005

In this paper, a new approach that is based on EEAC & only with network solutions for CS&S in the transient stability assessment is developed. The proposed CS&S algorithm in conjunction with EEAC to include the capability of performing on-line TSA without TDS is used to calculate the critical clearing time for stability index. In this algorithm, all generators are represented by classical models and all loads are represented by constant impedance load models. The accelerating & synchronizing power coefficient as an index is determined at its disturbance through solving network equation directly. As mentioned above, a new index for generator is generally used to determine the critical generators group. The generator rotor angle is fixed for non-critical generators group, but has equal angle increments for critical generators group. Finally, the critical clearing time is calculated from the power-angle relationship of equivalent OMIB system. The proposed CS&S algorithm currently being implemented is applied to the KEPCO system. The CS&S result was remarkably similar to TSAT program and SIME. Therefore, it was found to be suitable for a fast & highly efficient CS&S algorithm in TSA. The time of CS&S for the 139 contingencies using proposed CS&S algorithm takes less than 3 seconds on Pentium 4, 3GHz Desktop.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.227-230
• /
• 2005

This paper describes the problems in measuring and evaluating the aviation noises and the differences on the noise characteristics between fighter and civil aircraft. From a standpoint of the duration time for aviation noise and the dynamic characteristics related with the sampling time, the measured values for landing and taking-off noises from the fighter are presented and explained in comparison with those from the civil aircraft. And also the aviation noises by the fighter and civil aircraft are evaluated by equivalent sound level and WECPNL, respectively. From the obtained results, it is recommended that the duration time and dynamic characteristics be deeply considered in evaluating and measuring the aviation noises, since they have a great influence on the final assessment results. As the number of flight is not sufficient and the noise source is strong impulse type, moreover, the aviation noise should be assessed by WECPNL.

• 한국안전학회지
• /
• 제37권6호
• /
• pp.1-8
• /
• 2022

This study analyzed the characteristics of insulation resistance and operating time based on an accelerated degradation test of a low-voltage circuit breaker. The experimental sample used a molded case circuit breaker (MCCB) and an earth leakage circuit breaker (ELCB). After measuring the insulation resistance of the circuit breakers, the leakage current was affected by an external rather than an internal structure. Furthermore, the insulation resistance of the circuit breakers with accelerated degradation was measured using a Megger insulation tester. In the accelerated degradation test, aging times of five, ten, 15, and 20 years were applied according to a temperature derived using the Arrhenius equation. Circuit breakers with an equivalent life of ten, 15, and 20 years had increased insulation resistance compared to those with less degradation time. In particular, the circuit breaker with an equivalent life of ten years had the highest insulation resistance. Component analysis of the circuit breaker manufactured through an accelerated degradation test confirmed that the timing of the increase in insulation resistance and the time of additive loss were the same. Finally, after analyzing the operating time of the circuit breakers with degradation, it was confirmed that the MCCB did not change, but the ELCB breaker failed.

• 콘크리트학회논문집
• /
• 제26권3호
• /
• pp.351-360
• /
• 2014

이 연구의 목적은 감쇠시스템 설계 시 ASCE7-10의 등가선형해석과 응답스펙트럼해석의 설계절차 및 비선형해석에 간략화된 등가프레임모델을 제안하여, 선형 및 비선형 해석 시 소모되는 시간을 줄이고 해석 조건 및 변수조건을 다양화함으로 감쇠시스템 적용 시 효과를 합리적으로 검토하는데 있다. 이 연구에서는 최근에 이슈화 되고 있는 공동주택의 감쇠시스템 도입과 관련하여 ASCE7-10의 성능기반 내진설계를 근간으로 내진성능평가 및 감쇠시스템 설계를 비선형응답이력 해석을 통하여 수행하였다. 특히 공동주택 대상건물을 건축구조기준의 75% 지진력 수준으로 최적화 설계 시 내진성능평가를 수행하여 안전성을 검토하는 한편, 기준에 제시된 지진력 수준으로 내진설계 시 골조물량을 비교 하여 경제성을 검토하였다. 또한, 대상건물에 외부제어 이력형 감쇠장치를 적용 시 제안한 프레임 등가모델을 이용하여 ASCE7-10 감쇠시스템 설계를 수행하였으며 Full Scale Model에서 그 제어효과를 검증하였다.

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2006년도 춘계학술대회 논문집
• /
• pp.77-84
• /
• 2006

• Journal of Mechanical Science and Technology
• /
• 제19권spc1호
• /
• pp.429-436
• /
• 2005

This paper presents a precise and stable time integration method for dynamic analysis of vibration or multibody systems. A total system is divided into several subsystems and their responses are calculated separately, while the coupling effect is treated equivalently as constant force during time steps. By using iterative procedure to improve equivalent coupling forces, a precise and stable solution is obtained. Some examples such as a seismic response and multibody analyses were carried out to demonstrate its usefulness.