• 한국전자파학회논문지
• /
• 제12권1호
• /
• pp.18-26
• /
• 2001

본 논문에서는 압전체를 전기기계 압전파동방정식과 경계조건을 이용하여 고유치 제로 정식화하고, 3차원 유한요소법을 적용하여 초고주파 대역에서 동작하는 압전박막공진기의 공진모드 및 공진특성을 공진기의 입력 임피던스를 통하여 해석하였다. 이를 통하여 1차원 해석에서는 불가능하였던 공진기의 전극형상과 상, 하부 전극의 비대칭 구조에 따른 공진특성과 스퓨리어스특성을 추출하였다. 본 논문에서 제안한 방법으로 계산된 공진주파수를 Mason 등기모델 해석결과 및 실제 제작한 ZnO 압전박막공진기의 공진 특성과 비교한 결과 정확하게 일치함을 확인하였다. 또한 두께진동모드로 동작하기 위한 최적의 길이와 두께의 비가 20 : 1이고 최소한의 길이와 두께의 비가 5:1 이상임을 알 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제19권2호
• /
• pp.183-188
• /
• 1998

동맥과 PTFE 재료로 된 대체혈관이 혈관폐색이 생긴 부위를 우회하기 위하여 단측문합이 되었을 때 문합각의 변화에 의한 영향을 살펴보기 위하여 두 혈관의 직경비를 0.5로 고정하고 문합각을 30$^{\circ}$에서 90$^{\circ}$까지 $10^{\circ}$간격으로 변화시켜 컴플라이언스와 응력의 분포형태를 살펴보고 또한 직경비의 영향도 살펴보기 위하여 문합각을 45$^{\circ}$로 고정하고 직경비를 0.1에서 1까지 0.1간격으로 변화시켜 컴플라이언스와 응력의 변화를 살펴보았다. 단측문합비에 사용된 모델은 20-24mm, 내경 4mm, 두께 0.5mm의 동맥과 길이 10mm, 내경 2mm, 두께 0.2mm의 PTFE 대체혈관이 사용되었으며 문합각이 작아지거나 직경비가 커질수록 예각 문합부의 컴플라이언스가 점점 더 커진다는 것을 알았다.

• 한국지반신소재학회논문집
• /
• 제13권4호
• /
• pp.109-117
• /
• 2014

본 논문에서는 전편의 논문에서 제시한 힌지연결부를 갖는 쉘해석모델을 이용하여 변수연구를 수행하였다. 주요변수에는 중차량 통과에 의하여 발생한 원지반의 영구변형 폭, 되메움, 강재매트의 등가두께 및 강재매트의 이방성 특성이 고려되었다. 이러한 주요변수들이 롤타입강재매트의 수직처짐, 회전변위 및 모멘트와 응력에 미치는 영향을 분석하였다. 분석결과, 차륜하중에 의하여 발생한 동토의 영구소성변형으로 인하여 매우 큰 수직처짐과 허용휨인장강도를 초과하는 인장응력이 발생하는 것으로 나타났다. 이러한 문제는 되메움 또는 강재매트의 등가두께를 증가시킴으로서 쉽게 해결될 수 있다.

• Animal Bioscience
• /
• 제34권11호
• /
• pp.1870-1878
• /
• 2021

Objective: The objective of this experiment was to investigate the effects of different colors produced by light emitting diode (LED) on Brown Tsaiya ducks. Methods: A total of 144 female Brown Tsaiya ducks were randomly allocated into three individual cage rearing chambers with different LED illumination colors as treatments. Three different treatments were: i) white color, ii) blue color, and iii) red color. The experiment periods were from ducks 21 to 49 weeks of age, determined traits included i) egg laying performance, ii) feed intake, iii) egg shell breaking strength, iv) egg shell thickness, v) egg Haugh unit, vi) egg weight, vii) serum Estradiol and Progesterone concentration, and viii) behavior pattern. Results: The results indicated that when compared with white and blue color, red color could stimulate ducks sexual maturation and raised the egg laying performance. The red light group was also observed to have the highest feed intake among three treatments. The blue treatment had the lowest egg shell breaking strength and the highest egg weight among three treatments, nevertheless, no significant difference was observed among three treatments on egg shell thickness and egg Haugh unit. The red light group had higher serum estradiol concentration than the white and blue groups, but no significant difference among treatments on the serum Progesterone concentration was found. The results of behavior pattern indicated that red light group showed more feeding and less resting behavior compared to the blue light group. Conclusion: We found a potential of applying red light illumination in the indoor laying duck raising system with positive results on egg laying performance and acceptable egg weight, equivalent egg qualities compared to white and blue light.

• 한국분무공학회지
• /
• 제26권3호
• /
• pp.127-134
• /
• 2021

Fire sprinkler initial spray was analyzed by Large eddy simulation (LES) and Volume of Fluid (VoF) integrated method. The IsoAdvector geometric VoF was used to identify the liquid-gas interface clearly even with the large Courant-Friedrichs-Lewy number. To reduce the computational costs, sector meshes and Adaptive Mesh Refinement up to level 3 were used. Base mesh size was 1 mm, which is roughly equivalent to the initial sprinkler droplet. Top surface radius of boss and deflector size were modified to investigate the effects of sprinkler head design on primary breakup process. When top surface radius of boss was increased, vertical liquid sheet was formed. This phenomenon reduced the sheet breakup radius, sheet thickness and velocity. Due to reduced liquid sheet thickness, a large amount of ligaments was created from the liquid sheet. As a result, there was a dramatic decrease in volume per surface area, indicating an increase in breakup process. Spray pattern viewed in radial direction also changed when top surface radius of boss increased. When top surface radius of boss was increased, a T-shaped pattern was observed while a V-shaped pattern was observed in all other cases. When the deflector size increases, the spray pattern remains V-shaped, even if the top surface radius of boss increased. Further studies on promoting atomization of the water supplied to the lower part of the sprinkler head in the T-shape pattern should be conducted.

• Wind and Structures
• /
• 제32권1호
• /
• pp.55-69
• /
• 2021

Ultrapure ferritic stainless steel provides a new generation of long-span metal roof systems with continuous welding technology, which exhibits many unknown behaviors during wind excitation. This study focuses on the wind-resistant capacity of a new continuous welding stainless steel roof (CWSSR) system. Full-scale testing on the welding joints and the CWSSR system is performed under uniaxial tension and static ultimate wind uplift loadings, respectively. A finite element model is developed with mesh refinement optimization and is further validated with the testing results, which provides a reliable way of investigating the parameter effect on the wind-induced structural responses, namely, the width and thickness of the roof sheeting and welding height. Research results show that the CWSSR system has predominant wind-resistant performance and can bear an ultimate wind uplift loading of 10.4 kPa without observable failures. The welding joints achieve equivalent mechanical behaviors as those of base material is produced with the current of 65 A. Independent structural responses can be found for the roof sheeting of the CWSSR system, and the maximum displacement appears at the middle of the roof sheeting, while the maximum stress appears at the connection supports between the roof sheeting with a significant stress concentration effect. The responses of the CWSSR system are greatly influenced by the width and thickness of the roof sheeting but are less influenced by the welding height.

• Structural Engineering and Mechanics
• /
• 제81권6호
• /
• pp.715-728
• /
• 2022

A new type of buckling-restrained braces (BRBs) with a longitudinally profiled steel plate working as the core (LPBRB) is proposed and experimentally investigated. Different from conventional BRBs with a constant thickness core, both stiffness and strength of the longitudinally profiled steel core along its longitudinal direction can change through itself variable thickness, thus the construction of LPBRB saves material and reduces the processing cost. Four full-scale component tests were conducted under quasi-static cyclic loading to evaluate the seismic performance of LPBRB. Three stiffening methods were used to improve the fatigue performance of LPBRBs, which were bolt-assembled T-shaped stiffening ribs, partly-welded stiffening ribs and stiffening segment without rib. The experimental results showed LPBRB specimens displayed stable hysteretic behavior and satisfactory seismic property. There was no instability or rupture until the axial ductility ratio achieved 11.0. Failure modes included the out-of-plane buckling of the stiffening part outside the restraining member and core plate fatigue fracture around the longitudinally profiled segment. The effect of the stiffening methods on the fatigue performance is discussed. The critical buckling load of longitudinally profiled segment is derived using Euler theory. The local bulging behavior of the outer steel tube is analyzed with an equivalent beam model. The design recommendations for LPBRB are presented finally.

• 한국지반공학회논문집
• /
• 제23권5호
• /
• pp.153-162
• /
• 2007

치환공법을 적용하여 연약지반 상에 시공되는 보강토 옹벽에 대해 연약지반의 두께 및 강성, 치환깊이와 옹벽높이의 변화에 따른 옹벽의 거동을 연약지반 압밀현상과 시공단계를 함께 고려하는 유한요소해석으로 검토하였다. 옹벽의 거동은 벽체에 발생하는 변위와 침하량, 옹벽 기초지반에 발생하는 전단변형율로 표현하였다. 거동에 따른 옹벽의 안정성은 변위와 전단변형율의 한계값을 문헌연구로부터 정하고 이를 기준으로 평가하였다. 해석결과로부터, 옹벽의 거동은 연약지반 두께(t)와 강성, 치환깊이(d), 옹벽높이(h)의 변화에 따라 모두 영향을 받지만, 특히 d와 h의 변화에 민감한 것을 규명하였다. 또한, 옹벽의 안정성 유지를 위해 요구되는 d/h 값은 t와 h의 변화에 대하여 크게 영향을 받지 않음을 보였다. 이러한 결과로부터 연약지반 상 보강토 시공 구간 내에서 옹벽 높이가 변화하지만 그 변화정도가 극심하지 않은 경우에, 적정 치환깊이를 d/h로 나타낸 일률적인 값으로 제안할 수 있다는 결론을 얻었다.

• 소성∙가공
• /
• 제32권1호
• /
• pp.12-19
• /
• 2023

The armature core is a part responsible for the skeleton of the steering wheel. Currently, in the case of commercial trucks, the main parts of the parts are manufactured separately and then the product is produced through welding. In the case of this production method, quality and cost problems of the welded parts occur, and an integrated armature core made of magnesium alloy is used in passenger vehicles. However, in the case of commercial trucks, there is no application case and research is insufficient. Therefore, this study aims to develop an all-in-one armature core that simultaneously applies a magnesium alloy material and a die casting method to reduce the weight and improve the quality of the existing steel armature core. The product was modeled based on the shape of a commercial product, and finite element analysis (FEA) was performed through Ls-dyna, a general-purpose analysis program. Through digital image correlation (DIC) and uniaxial tensile test, the accurate physical properties of the material were obtained and applied to the analysis. A total of four types of compression were applied by changing the angle and ground contact area of the product according to the actual reliability test conditions. analysis was carried out. As a result of FEA, it was confirmed that damage occurred in the spoke area, and spoke thickness (t_spoke), base thickness (t_base), and rim and spoke connection (R) were designated as design variables, and the total weight and maximum equivalent stress occurring in the armature core We specify an objective function that simultaneously minimizes . A prediction function was derived using the sequential response surface method to identify design variables that minimized the objective function, and it was confirmed that it was improved by 22%.

• 한국재료학회지
• /
• 제34권6호
• /
• pp.283-290
• /
• 2024

The aggressive scaling of dynamic random-access memory capacitors has increased the need to maintain high capacitance despite the limited physical thickness of electrodes and dielectrics. This makes it essential to use high-k dielectric materials. TiO₂ has a large dielectric constant, ranging from 30~75 in the anatase phase to 90~170 in rutile phase. However, it has significant leakage current due to low energy barriers for electron conduction, which is a critical drawback. Suppressing the leakage current while scaling to achieve an equivalent oxide thickness (EOT) below 0.5 nm is necessary to control the influence of interlayers on capacitor performance. For this, Pt and Ru, with their high work function, can be used instead of a conventional TiN substrate to increase the Schottky barrier height. Additionally, forming rutile-TiO₂ on RuO₂ with excellent lattice compatibility by epitaxial growth can minimize leakage current. Furthermore, plasma-enhanced atomic layer deposition (PEALD) can be used to deposit a uniform thin film with high density and low defects at low temperatures, to reduce the impact of interfacial reactions on electrical properties at high temperatures. In this study, TiO₂ was deposited using PEALD, using substrates of Pt and Ru treated with rapid thermal annealing at 500 and 600 ℃, to compare structural, chemical, and electrical characteristics with reference to a TiN substrate. As a result, leakage current was suppressed to around 10^-6 A/cm² at 1 V, and an EOT at the 0.5 nm level was achieved.