• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.10a
• /
• pp.3-10
• /
• 1998

Optimization problems may be devided into geometry optimization problems and topology optimization problems. In this paper, a method using tile equivalent material properties prediction techniques of a particulate-reinforced composites is proposed for the topology optimization. This method makes use of penalty factor in order that regions with intermediate value of design variables can be penalized. The computational results being obtained from PLBA algorithm of some values of penalty factor are presented.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.12
• /
• pp.1909-1915
• /
• 2010

The material properties of gas turbine components change during the daily start/stop thermal cycle because of exposure to the hot combustion gas. Recently, single-crystal Ni-based superalloys have been used to manufacture many hot-gas components for gas turbines. However, the user needs to depend on the manufacturer for maintenance issues because of the lack of data required for predicting blade life and material degradation. In this study, we investigate the time-dependent degradation of first-stage blades at various operating facilities to collect the basic data for life assessment and damage analysis. The blade material is a single-crystal Ni-based superalloy, CMSX-4, and the EOH (equivalent operating hours) are 25,000 and 52,000, respectively. We prepared the test specimen directly from used blades and carried out mechanical tests and microstructural observations.

• Electrical & Electronic Materials
• /
• v.9 no.10
• /
• pp.1019-1026
• /
• 1996

In this study, we may be presented the carrier oscillation properties for the low-voltage varistor fabricated by a new method of three composition seed grain, in order to analyze the behavior of carriers at the its equivalent circuit model. The oscillation phenomena of carriers appeared from current-voltage characteristics under knee voltage is shown by the transient flow of nontrapped carriers group in the trap level of intergranular layer, surface state and/or depletion layer. In particularly, current oscillation phenomena is hardly shown in the high electric field. It is that the injected carriers from both electrodes are directly from the conduction band of forward biased ZnO grain through the intergranular layer into the reverse biased ZnO grain, because the trap level in the electric field above the knee voltage is mostly filled.

• Korean Journal of Metals and Materials
• /
• v.48 no.11
• /
• pp.965-973
• /
• 2010

The small punch creep (SPC) test has recently received much attention as a new alternative to the conventional uniaxial creep test because it needs only a miniature-sized specimen directly detached from an operating system or component without any serious sampling damages. However, it is difficult to obtain the equivalent uniaxial creep data directly from the SPC data. As a specimen is deformed by a punch in the SPC test, the test result is sensitive to the friction between them. Finite element analyses with various friction coefficients was performed and showed a tendency of increased SPC life with an increased friction coefficient. The necking position predicted by the SPC simulation with a proper friction coefficient showed good agreement with that observed from the real SPC test. Finally, a noble method to convert the SPC load and displacement rate into the equivalent uniaxial creep stress and strain rate, respectively, was established in this study.

• Journal of KSNVE
• /
• v.9 no.2
• /
• pp.348-354
• /
• 1999

An AC traction motor was developed, of which the rotor core has an unique structure, made of multi-layered silicon steel plates which were shrink-fitted to a shart. the equivalenet material properties were estimated with a newly proposed efficient method, based on the correlation between finite element analysis results and modal testing. A general rotordynamic analysis for the rotor with the equivalent material properties was carried out to evaluate the structural integrity of the virtually built-up motor.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.2
• /
• pp.153-161
• /
• 2009

Three-dimensional finite-element methods(FEM) have been used to analyze the thermal stress of an exhaust gas recirculation(EGR) cooler due to thermal and pressure load. Since efficiency and capability of the heat exchanger are mainly dependent on net heat transferring area of the EGR cooler system, the tube inside the system has a numerous dimples on the surface. Thus for finite element analysis, firstly the dimple-typed tube is modeled as a plain element without the dimple, and then the equivalent thermal conductivities and elastic modulus are calculated. This work describes the numerical homogenization procedure of the dimple-typed tube and verifies the equivalent material properties by comparison of a single unit and the actual full model. Finally, the homogenization scheme presented in this study can be efficiently applied to finite element analyses for the thermal stress and deformation behavior of the EGR cooler system with the dimple-typed tube.

• Computers and Concrete
• /
• v.22 no.1
• /
• pp.117-122
• /
• 2018

The use of nanotechnology materials and applications in the construction industry should be considered for enhancing material properties. However, in this paper, the technical and economical assessment of applying silica nanoparticles for construction of concrete structure is studied. In order to obtain the equivalent material properties of the structure, the Mori-Tanaka model is used considering agglomeration of nanoparticles. The effect of using these nanoparticles on mechanical properties of concrete, such as the modulus of elasticity, compressive strength, as well as its indirect effect on armature percentage is investigated. Finally, the price of silica nanoparticles and its effect on the price increase of concrete structure is investigated. The results show that increasing the volume percent of silica nanoparticles up to 10% improves elastic modulus 111% and reduces amateur percentage up to 72%.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.964-968
• /
• 2001

The refractory-lined pipe is used to protect the system from high-temperature of the internal flow. The property of the refractory has an effect upon the stress analysis for fluid catalyst cracking(FCC) unit piping design. The equivalent elastic modulus and density considering steel and refractory must be applied in the stress analysis of the system. In the research, the theoretical method to obtain the value of the equivalent property is introduced and then the parametric analysis is carried out to understand the characteristic of the material properties.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.1
• /
• pp.157-173
• /
• 2015

In the present study, the existing equivalent stain method is improved to make up for its weaknesses. The improved inherent strain model is built considering more sophisticated three dimensional constraints which are embodied by six cubic elements attached on three sides of a core cubic element. From a few case studies, it is found that the inherent strain is mainly affected by the changes in restraints induced by changes of temperature-dependent material properties of the restraining elements. On the other hand, the degree of restraints is identified to be little influential to the inherent strain. Thus, the effect of temperature gradients over plate thickness and plate transverse direction normal to welding is reflected in the calculation of the inherent strain chart. The welding deformation can be calculated by an elastic FE analysis using the inherent strain values taken from the inherent strain chart.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.398-404
• /
• 1998

The acoustic power reduction methods of the vibrating structures are valid to design the quite structure. To calculate the acoustic power, the dynamic responses have to be determined. It is not easy to analyse the structure composed of the corrugated panels. Because of the structural complexity and the many analysing times. To make up for these defects, the equivalent orthogonal panel is presented. Also the acoustic power prediction method of the vibrating structures is proposed. As examples, the equivalent material properties of the corrugated plates are obtained and the acoustic powers of the floor structure are calculated at several frequency regions for KHST.