• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.151-160
• /
• 1999

It is recommended to have symmetric plan and elevation in structural design of hight-rise building structures to reduce torsional response of the structures. However it is not always allowed to do so due to architectural purposes. in many cases high-rise buildings are asymmetric. The purpose of this study is to predict the torsional behavior of high-rise building structures with asymmetric plan. Equivalent lateral stiffness and deformation shape factor are used for prediction of torsional response of high-rise buildings. Overall torsion of a structure is estimated by equivalent lateral stiffness and torsion of each floor is estimated by deformation factor in each 2-D lateral force resisting elements.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권3호
• /
• pp.138-144
• /
• 2000

The detent force caused by the interaction of magnets with the teeth of a armature core deteriorates the driving performance of a permanent magnet linear synchronous motor. In this paper, we analyze the fields and forces of a linear synchronous motor with segmented or skewed magnet arrangement according to lateral overhang length of permanent magnets. For the analysis, the 3-dimensional equivalent magnetic circuit network method is used. The detent force and the static thrust are analyzed according to the segmented or skewed angle and the overhang length of permanent magnets, and the optimal angles that the detent force is minimized are found out in each case. The analysis results are compared with the experimental ones and shown a reasonable agreement.

• 콘크리트학회논문집
• /
• 제20권1호
• /
• pp.35-41
• /
• 2008

플랫플레이트 시스템은 주로 전단벽과 가새 골조와 같은 횡력저항 시스템과 함께 중력저항 시스템으로 사용된다. 따라서 지진과 같은 횡하중이 작용할 때, 중력저항 시스템은 중력하중에 대한 전달 능력을 유지하면서 일체로 연결된 횡력저항 시스템의횡변위를 견딜 수 있어야 한다. 또한 플랫플레이트 시스템은 지진에 대한 특별 상세조건에 만족하면 중간 모멘트 골조로써 횡력저항 시스템으로도 사용할 수 있다. 그러나 횡하중이 작용하는 경우 플랫플레이트 시스템은 횡변위와 불균형모멘트로 인한 뚫림 전단의 위험성은 더욱 커지게 된다. 따라서 플랫플레이트 시스템을 중력 저항 또는 횡력 저항 시스템으로 설계하는 모든 경우에 중력하중뿐만 아니라 횡하중하의 설계 내력 (모멘트와 전단력)과 변위 등의 합리적인 예측은 매우 중요하다. ACI 318 (2005)에서는 중력하중에 대한 해석시 직접설계법과 등가골조법을 제시하고 있으며, 횡하중에 대한 해석으로 유한요소법, 유효보폭법, 등가골조법을 허용한다. 이러한 해석법은 각각 장단점을 갖고 있으며, 매우 광범위한 해석 결과를 보인다. 따라서 구조 설계자들은 적절한 해석법의 선택과 해석 결과를 분석하는데 어려움을 갖는다. 본 연구의 목적은 플랫플레이트 해석법에 대한 구조 설계자들이 적절한 해석법을 선택할 수 있도록 하고, 횡하중에 대한 해석 방법으로 수정된 등가골조법의 실용성을 검증하고자 하였다. 이를 위하여 중력하중과 횡하중을 받는 7층의 플랫플레이트 구조물에 대한 내부력과 횡변위를 대상으로 유한요소해석을 수행하고 각 골조해석법의 결과를 비교하였다. 또한 각 골조해석법의 정확성은 기존 플랫플레이트 슬래브 구조물의 실험 결과와 비교하여 검증하였다.

• 콘크리트학회논문집
• /
• 제17권3호
• /
• pp.419-426
• /
• 2005

본 연구는 수평하중을 받는 플랫 플레이트 슬래브 해석을 위한 수정된 등가골조 모델을 제안한 것이다. ACI 318 (2000)은 중력하중 뿐만 아니라 수평하중을 받는 2 방향 슬래브 해석을 위해 등가골조 모델을 허용하고 있다. ACI 318 (2000)에서 채택하고 있는 등가골조 모델은 중력하중을 고려하여 발전되었기 때문에, 수평하중하의 플랫 플레이트 슬래브의 거동을 정확하게 예측하지 못할지 모른다. 따라서 본 연구는 수평하중 하의 플랫 플레이트 슬래브에 대한 더 정확한 해답을 줄 수 있는 수정된 등가골조 모델을 발전시켰다. 수평하중이 지배적인 경우, 이 모델은 기존 등가골조 모델보다 플랫 플레이트 슬래브 시스템의 구성요소 슬래브, 기둥, 비틀림 부재에 대한 더 정확한 힘의 전달 메커니즘을 반영한다. 이 모델의 타당성은 유한요소해석 결과와 제안한 모델의 해석 결과를 비교하여 검증하였으며, 기존 등가골조 모델의 해석 결과가 비교에 포함되었다. 양방향으로 3스팬을 갖는 2층 건물을 비교 대상으로 삼았으며, 수정된 등가골조 모델의 수평변위 및 슬래브모멘트 결과는 유한요소해석 결과와 가장 근사한 결과를 나타냈다.

• 대한기계학회논문집A
• /
• 제25권4호
• /
• pp.602-609
• /
• 2001

This paper is concerned with the orthotropic problem of diaphragm-type air springs which consist of rubber linings, nylon reinforced rubber composite and bead ring. The analysis is carried out with a finite element method developed to consider the orthotropic properties, geometric nonlinearity using four-node degenerated shell element with reduced integration. Physical stabilization scheme is used to control the zeroenergy mode of the element. The analysis includes an inflation analysis and a lateral analysis of an air spring for the deformed shape and the spring load with respect to the vertical and l ateral deflection. Numerical results demonstrate the variation of the outer diameter, the fold height, the vertical force and the lateral force with respect to the inflation pressure and the lateral deflection.

• Structural Engineering and Mechanics
• /
• 제31권4호
• /
• pp.423-437
• /
• 2009

In order to perform a step-by-step force-displacement response analysis or dynamic time-history analysis of large buildings with masonry infilled R/C frames, a continuous force-deformation model based on an equivalent strut approach is proposed for masonry infill panels containing openings. The model, which is applicable for degrading elements, can be implemented to replicate a wide range of monotonic force-displacement behaviour, resulting from different design and geometry, by varying the control parameters of the model. The control parameters of the proposed continuous model are determined using experimental data. The experimental program includes fifteen 1/3-scale, single-story, single-bay reinforced concrete frame specimens subjected to lateral cyclic loading. The parameters investigated include the shape, the size, the location of the opening and the infill compressive strength. The actual properties of the infill and henceforth the characteristics needed for the diagonal strut model are based on the assessment of its lateral resistance by the subtraction of the response of the bare frame from the response of the infilled frame.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.688-693
• /
• 2001

It is almost impossible to have a straight web for processing in the continuous process systems. The cambered web usually causes the strip walking and damage during process. It is necessary to identify the lateral dynamics of the cambered web for the precise control of lateral behavior. In this paper, a dynamic model of the lateral behavior for a cambered web is developed by introducing the concept of steering angle equivalent to moment caused by the camber. This model can be extended to include terms associated with moment, induced by roller's tilting, web slippage, and shear force, etc. Using this model, a new feed-forward controller is proposed to enable the on-line camber estimation, which is difficult to be measured directly, and the prediction of lateral deflection caused by camber. Computer simulation study shows that the proposed controller successfully eliminates the effect of camber and has better control performance than that of the existing PID controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.32-35
• /
• 1996

This paper analyzes characteristics of PMLSM using 3 dimensional equivalent magnetic circuit network method (3-D EMC). PMLSM of which the effective electric-airgap is not only very large, but also the width is finite width lateral edges has much leakage flux. Therefore, 2-D analysis method cannot consider it so carefully that 3-D analysis method must required. 3-D EMC which will be used for analysis of PMLSM performs modeling of it including solt and teeth structure, uses the magnetic motive force of stator winding and permanent magnet as source. and calculates magnetic flux density and force considering nonlinear characteristics of materials. we verified analysis validity by comparing simulation results with expermental results.

• 한국공간구조학회논문집
• /
• 제20권1호
• /
• pp.87-94
• /
• 2020

A corrugated steel plate wall (CSPW) system is advantageous to secure the strength and stiffness required for lateral force resistance because of its high out-of-plane stability. It can also stably dissipate large amounts of energy even after peak strength. In this paper, a preliminary study has been carried out to use the CSPW system in the seismic retrofit of existing reinforced concrete (RC) moment frame buildings. The seismic performance for an example building was evaluated, and then a step-by-step retrofit design procedure for the CSPW was proposed. An equivalent analytical model of the CSPW was also introduced for a practical analysis of the retrofitted building, and the strengthening effect was finally evaluated based on the results of nonlinear analysis.

• Steel and Composite Structures
• /
• 제20권1호
• /
• pp.57-70
• /
• 2016

The predominant type of buckling that I-steel concrete composite beams experience in the negative moment area is distortional buckling. The key factors that affect distortional buckling are the torsional and lateral restraints by the bottom flange. This study thoroughly investigates the equivalent lateral and torsional restraint stiffnesses of the bottom flange of an I-steel concrete composite beam under negative moments. The results show a coupling effect between the applied forces and the lateral and torsional restraint stiffnesses of the bottom flange. A formula is proposed to calculate the critical buckling stress of the I-steel concrete composite beams under negative moments by considering the lateral and torsional restraint stiffnesses of the bottom flange. The proposed method is shown to better predict the critical bending moment of the I-steel composite beams. This article introduces an improved method to calculate the elastic foundation beams, which takes into account the lateral and torsional restraint stiffnesses of the bottom flange and considers the coupling effect between them. The results show a close match in results from the calculation method proposed in this paper and the ANSYS finite element method, which validates the proposed calculation method. The proposed calculation method provides a theoretical basis for further research on distortional buckling and the ultimate resistance of I-steel concrete composite beams under a variable axial force.