• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.481-481
• /
• 2007

This work describes the effect of the number of roll pressing and the composition of carbon black on the electric and mechanical properties of carbon-PTFE electrode, in which composition is MSP 20 : carbon black: PTFE = 95-x : x : 5 wt.%. It was found that the best electric and mechanical properties were obtained in sheet electrode roll-pressed for about 15 times and in sheet electrode, in which composition is MSP 20 : carbon black: PTFE = 80 : 15 : 5 wt.%. These behaviors could be explained by the network structure of PTFE fibrils and conducting paths linked with carbon blacks, respectively. On the other hand, cell capacitor using the sheet electrode with 15 wt.% of carbon black attached on aluminum current collector with the electric conductive adhesive, in composition is carbon black : CMC = 70 : 30 wt.%, has exhibited the best rate capability in the current range of $0.5mA/cm^2$ $100mA/cm^2$ and the lowest equivalent series resistance.

• 한국대기환경학회지
• /
• 제34권5호
• /
• pp.727-734
• /
• 2018

In this study, real-time absorption coefficients of carbonaceous species in $PM_{2.5}$ was observed using a dual-spot 7-wavelength Aethalometer between November 1, 2016 and December 31, 2017 at an urban site of Gwangju. In addition, 24-hr integrated $PM_{2.5}$ samples were simultaneously collected at the same site and analyzed for organic carbon and elemental carbon (OC and EC) using the thermal-optical transmittance protocol. A main objective of this study was to estimate mass absorption cross section (MAC) values of black carbon (BC) particles at the study site using the linear regression between aethalometer-based absorption coefficient and filter-based EC concentration. BC particles observed at 880 nm is mainly emitted from combustion of fossil fuels, and their concentration is typically reported as equivalent BC concentration (eBC). eBC concentration calculated using MAC value of $7.77m^2/g$ at wavelength of 880 nm, which was proposed by a manufacturer, ranged from 0.3 to $7.4{\mu}g/m^3$ with an average value of $1.9{\pm}1.2{\mu}g/m^3$, accounting for 7.3% (1.5~20.9%) of $PM_{2.5}$. The relationship between aerosol absorption coefficients at 880 nm and EC concentrations provided BC MAC value of $15.2m^2/g$, ranging from 11.4 to $16.2m^2/g$. The eBC concentrations calculated using the estimated MAC of $15.2m^2/g$ were significantly lower than those reported originally from aethalometer, and ranged from 0.2 to $3.8{\mu}g/m^3$, with an average of $1.0{\pm}0.6{\mu}g/m^3$, accounting for 3.7% of $PM_{2.5}$ (0.8~10.7%). Result from this study suggests that if the MAC value recommended by the manufacturer is applied to calculate the equivalent BC concentration and radiative forcing due to BC absorption, they would result in significant errors, implying investigation of an unique MAC value of BC particles at a study site.

• 공업화학
• /
• 제10권3호
• /
• pp.419-426
• /
• 1999

가황고무의 가황반응에 대하여 가황시스템 및 온도, 보강성충전제 첨가량 변화에 의한 반응속도상수 및 활성화에너지, 가교밀도 및 탄성상수, 가황특성 ($t_5,\;t_{90}$), 고무보강성 및 내마모성을 고찰하였다. 반응속도상수는 보강성충전제 첨가량, 가황시스템 및 가황반응온도에 대한 의존성이 크게 나타났으며, 반응온도에 따라 지수적으로 증가하였다. 활성화에너지는 가황시스템중 촉진제에 대한 황 비율이 높은 가황시스템에서 가장 작게 나타났으며, 보강성충전제 첨가량이 적을수록 작게 나타났다. 카본블랙 첨가량 변화는 고무보강성 및 내마모성에 직접적으로 영향을 미치고 있으나, 가황시스템 변화는 각기 다른 영향이 나타났다. 카본블랙 첨가량이 증가하면 모듈러스가 증가하고, 내마모성이 향상되며, 스코치시간이 짧아졌으나, 가교밀도 및 탄생상수는 감소하였다. 높은 가교밀도 및 탄성상수는 카본블랙 첨가량에 관계없이 촉진제에 대한 황 비율 0.73 (${\fallingdotseq}1$)에서 나타났으며, 스코치시간 ($t_5$)은 촉진제에 대한 황 비율 변화에 거의 영향을 받지 않는 것으로 나타났다. 빠른 최적가황시간 ($t_{90}$) 역시 촉진재에 대한 황 비율이 1에 가까운 조건 (=0.73)에서 나타났다. 가황조건별 배합고무의 등가 가황곡선계수는 카본블랙 첨가량에 관계없이 CC 시스템에 대해서는 0.96, SEC 및 EC 시스템에 대해서는 0.74로 나타났다. 한편 가황고무의 마모된 부피는 부과된 하중이 증가함에 따라 지수적으로 증가하였다.

• 수산해양기술연구
• /
• 제60권1호
• /
• pp.1-8
• /
• 2024

This study examined the power consumption of angling boats during entry, departure, and fishing operations using a black box-type storage device. Through this analysis, it determined the energy consumption and carbon emissions of small fishing boats used for catching the largehead hairtail. The energy consumption and carbon emissions were calculated using formulas provided by the Korea Energy Agency, which incorporated updated emission coefficients from 2022. The findings revealed that the average power consumption of small fishing boats for the largehead hairtail was 546.3 kWh, with a total energy consumption of 0.1164 TOE and carbon emissions of 24.057 CO₂. The average energy consumption was calculated at 0.0006 TOE per kilogram, and the carbon emissions were determined to be 0.135 CO₂/kg.

• 한국대기환경학회지
• /
• 제33권3호
• /
• pp.205-216
• /
• 2017

Carbonaceous aerosols such as the equivalent black carbon (eBC), the elemental carbon (EC) and the organic carbon (OC) were monitored at the Seoul Olympic Park site ($37.521^{\circ}N$, $127.124^{\circ}E$) during the KORUS-AQ 2016 campaign using a Multi Angle Absorption Photometer (MAAP) and an OCEC Analyzer. Averaged mass concentrations of eBC, EC and OC were presented as $2.46{\pm}1.52{\mu}g/m^3$, $1.01{\pm}0.60{\mu}g/m^3$ and $4.85{\pm}2.60{\mu}g/m^3$, respectively. OC/EC ratio and mass absorption cross-section (MAC) of light absorbing aerosols were calculated as 2.32 and $14.8m^2/g$, respectively. Diesel OC concentrations were estimated from a source profile of diesel vehicles as well. eBC mass concentrations measured from May $26^{th}$ to May $27^{th}$, 2016 showed 40% higher than averaged eBC mass concentrations during campaign period. $PM_{2.5}$ concentrations measured in this period were also higher than average $PM_{2.5}$ concentrations. High eBC concentrations were observed from May $29^{th}$ to May $31^{st}$, 2016 and from June $9^{th}$ to June $11^{th}$, 2016, possibly due to morning rush hour and the effect of temperature inversion at night. Diurnal variations of eBC, EC and Diesel OC showed a typical pattern of metropolitan area. In the weekend, however, diurnal variations of eBC, EC and Diesel OC mass concentrations were different from those measured in the weekday. It is expected that this study can help to understand the relationship between carbonaceous aerosols in a metropolitan area.

• 자원환경지질
• /
• 제13권4호
• /
• pp.215-227
• /
• 1980

The rock units of Goesan area in the Ogcheon metamor phic terrain established on the basis of field criteria should be redefined into following sequence. Based on shear senses in secondary small structures which are usually observable in the investigated area, the stratigraphy can be lithologically divided into the lower pelite, pebbly mudstone, upper pelite, quartzite and psammite unit in ascending order. This conclusion is in discordance with a previous opinion; Munjuri formation and Guryongsan formation may be equivalent to upper pelite unit, Iwonri formation and Hwanggangri formation to pebbly mudstone. From this, it may be inferred that isoclinal overturned folds repeatly occur in the area. The uranium bearing coaly thin layers in upper pelite unit have relatively broad exposures in Deogpyeongri block of Goesan area along culmination zone in the central part of the investigated area. It is believed that structural feature in the block recognized complexly refolded synform plunging to southwest. Mineralogical and radiometric studies were made on 135 representative samples from the Ogcheon Group of Korea. The mineralogy of all black slate samples is qualitatively similar but quantitatively ·different. The uranium distribution in the studied area show approximately log normal. Uranium in the black slates of the Ogcheon Group was deposited together under same physico-chemical environmental conditions. The chemical and geological factors that controlled the abundance of organic carbon and iron oxides also controlled the uranium content. The relationship of the major components to uranium can be expressed by the following regression equation: $Log(U\times10^4+1)$= 1.70999-0.00367(quartz)0.00512(micas)-0.00930 (other silicates)+0.01911 (iron oxides)-0.03389(other opaques)+0.02062(organic carbon).

• Elastomers and Composites
• /
• 제38권2호
• /
• pp.167-174
• /
• 2003

Thermoplastic vulcanizates (TPV) or dynamic vulcanizates are thermoplastic elastomers produced by simultaneous mixing and crosslinking of a rubber and a thermoplastic. The objective of the present work is to investigate the effects of different types of peroxides as curing agents on the properties of PP/EPDM TPVs. The mechanical properties change significantly with the chemical nature of the peroxides and the extent of crosslinking at a fixed PP/EPDM blend ratio. The tensile strength of the TPVs obtained with the various peroxides can be related to the solubility parameters of the polymers and of the peroxides. The Young's modulus of the peroxide-cured TPVs can be correlated with the delta torque values of equivalent thermoset EPDM vulcanizates, corresponding to the crosslinking efficiencies of the peroxides.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 춘계학술대회
• /
• pp.247-257
• /
• 2004

Electrodes were fabricated based on activated carbon powder BP-20, conducting agent such as Super P, vapor grown carbon fiber (VGCF) and acetylene black (AB), and the mixed binders of flexible poly(vinylidenefluoridehexafluoropropylene) [P(VdF-co-HFP)] and cross linking dispersion agent of polyvinylpyrrolidone (PVP) to increase mechanical strength. According to impedance measurement of the electrode with the addition of conducting agent, we found that it was possible to charge rapidly by the fast steady-state current convergence due to low equivalent series resistance (AC-ESR, fast charge transfer rate at interface between electrode and electrolyte and low RC time constant. The self-discharge of unit cell showed that diffusion process was controlled by the ion concentration difference of initial electrolyte due to the characteristics of Electric Double Layer Capacitor (EDLC) charged by ion adsorption in the beginning, but this by current leakage through the double-layer at the electrode/electrolyte interface had a minor effect and voltages of curves were remained constant regardless of electrode material. We found that the 2.3V/230F grade EDLC would be applied to industrial safety usage such as uninterrupted power supply (UPS) because of the constant DC-ESR by IR drop regardless of discharge current.

• 자원리싸이클링
• /
• 제23권1호
• /
• pp.40-47
• /
• 2014

폐자원으로 분류되는 석탄재의 미연탄소를 경제적으로 재활용하기 위한 방안을 모색하기 위하여, 서천화력발전소 매립 석탄재로부터 미연탄소를 분리한 후 활성탄소 제조가능성을 평가하였다. 정선부선을 4단계 실시하여 얻어진 미연탄소 정광의 고정탄소 품위는 87%로 얻어졌다. 미연탄소 정광에 포함된 결정질 불순물로는 주로 석영과 뮬라이트가 존재하였다. 화학적 활성화 전 미연탄소의 비표면적은 $10m^2/g$로 매우 낮았으며, 이는 국내 무연탄의 높은 탄화도와 관련되는 것으로 추측되었다. 또한 미연탄소는 대체로 다공성이며 결정학적으로는 터보스트래틱 구조를 갖고 있었다. 미연탄소 1 g과 KOH 6 g 을 혼합하여 활성화시킨 경우 얻어진 비표면적값이 $670m^2/g$로 가장 높았으며 미세공이 발달된 것을 확인하였다. KOH 용액을 사용한 경우 질소흡착량이 분말상 활성화 시료보다 낮게 나타난 것은 탄소입자의 젖음성 및 함침성이 낮은 때문으로 추측되었다. 본 실험에서 제조한 활성탄소는 미세공 분포가 높은 기능성 활성탄소의 세공특성을 보이며, 범용의 활성탄소에 준하는 비표면적값을 나타내 기존의 석탄계 활성탄소보다 우수하며 회분 함량도 적정 수준이었다. 따라서 공정의 경제성과 미연탄소 자체의 특성을 고려하여, 정수용 활성탄소 대체재나 혹은 카본블랙 대체용으로 재활용하는 것이 가능할 것으로 판단된다.

• 전기화학회지
• /
• 제26권3호
• /
• pp.35-41
• /
• 2023

리튬이온 이차전지용 음극 활물질인 탄소가 코팅된 실리콘 일산화물(carbon-coated silicon monoxide, c-SiO_x)은 용량이 높지만, 충방전 중의 부피변화로 인해 사이클 수명이 제한된다. 특히, 활물질의 큰 부피 변화는 전극의 구조를 변형시켜 전자의 전달경로가 쉽게 손상될 수 있다. 전극에서 전자전달 경로를 형성하는 도전재인 카본블랙 중 일부를 선형의 형태를 지니는 탄소나노튜브(carbon nanotube, CNT)로 대체하여 활물질의 부피변화로 인한 전극의 손상을 완화하여 성능을 개선하고자 한다. 전극 내의 전체 도전재의 함량을 10 중량%로 고정하고, 탄소나노튜브의 상대적인 함량을 0, 2, 5, 10, 25 중량%로 카본블랙의 일부를 대체하여 전극을 제조하고 전기화학적 성능을 평가하였다. 전극 내의 탄소나노튜브의 함량이 증가함에 따라 사이클 수명과 속도특성이 모두 향상된다. 부피 변화가 큰 c-SiO_x 음극에 소량의 CNT를 도전재로 적용하는 것으로 전지의 전기화학적 성능을 크게 향상시킬 수 있다. 또한 CNT를 잘 분산시키게 되면 더 적은 양을 사용하면서도 동등한 성능을 구현할 수 있다.