• 대한기계학회논문집A
• /
• 제35권7호
• /
• pp.773-778
• /
• 2011

포신과 같은 충격하중을 받는 파이프 형태의 구조물 진동을 측정하기 위해 가속계가 널리 사용된다. 포약의 폭발로 인해 발생하는 응력파는 포신의 횡진동에 미미한 영향을 미치지만 매우 큰 가속도 성분을 가지고 있어 미세 진동의 계측을 어렵게 한다. 기계적 필터는 가속도계를 부착하는 기계적 구조물과 진동감쇠재료로 구성되어, 고주파의 응력파를 제거하고 횡진동에 관련된 가속도 성분만을 가속도계로 전달하는 역할을 한다. 진동감쇠재료는 비선형성이 강하여 수학적 모델링이나 수치적 해석에 어려움이 있다. 본 논문에서는 9 가지의 진동감쇠재료의 진동특성을 실험적으로 확인하여, 기계적 필터에 가장 적합한 재료를 선택하였다. 또한, 압착에 따른 진동특성의 변화를 통해, 기계적 필터의 설계 데이터를 얻을 수 있었다. 기계적 필터를 설계 제작하여, 필터의 성능을 확인하였다.

• 한국태양에너지학회 논문집
• /
• 제29권6호
• /
• pp.32-38
• /
• 2009

The effects of surface radiative properties on the radiant cooling of opaque surfaces under clear sky condition are studied. Two types of surfaces, one gray and the other selective, are compared. For the nighttime cooling, black surface gives the lowest plate temperature and on the other hand the ideal selective surface gives the highest temperature. The reverse is true when there is an insolation. Equivalent radiative heat transfer coefficient of radiant cooling without convection is about $1{\sim}7\;W/m^2-K$ for the range of values studied. The surface with black within the $6{\sim}13\;{\mu}m$ band else zero emissivity could be regarded as a black surface for the nighttime radiant cooling purposes. However, lower band limit of $4\;{\mu}m$ is preferred to $6\;{\mu}m$ for small insolation situations.

• Structural Engineering and Mechanics
• /
• 제64권2호
• /
• pp.205-212
• /
• 2017

Based on the coupled elastic bending deformation features and relationships between the internal force and deformation of pre-twisted Euler beam, the generalized strain, the equivalent constitutive equation and the equilibrium equation of pre-twisted Euler beam are developed. Based on the properties of the dual-antisymmetric matrix, the general solution of pre-twisted Euler beam is obtained. By comparison with ANSYS solution by using straight Beam-188 element based on infinite approach strategy, the results show that the developed method is available for pre-twisted Euler beam and also provide an accuracy displacement interpolation function for the subsequent finite element analysis. The effect of pre-twisted angle on the mechanical property has been investigated.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권4호
• /
• pp.174-180
• /
• 2005

Linear pulse motor (LPM) has the vibration during the operation because of magnetic characteristic which is caused by the mechanical configuration and the electromagnetic property. This paper proposes the calculation of thrust on the base of magnetic equivalent circuit for the purpose of the vibration minimization of LPM. The permeance of LPM is calculated and simulated from the construction tooth. The thrust is compared with the analytical method, the 3D finite element method (FEM) and the experimental values. The vibration of LPM is measured and estimated to select the input current wave for an optimal operation condition.

• 한국기계가공학회지
• /
• 제18권4호
• /
• pp.41-47
• /
• 2019

The advent of highly integrated, high-power electronics requires low a coefficient of thermal expansion performance to prevent delamination between the heat dissipation material and substrate. This paper reports a preliminary study on the manufacturing technology of gas reaction control composite material, focusing on the prediction of the thermal expansion coefficients of Al-AlN composite materials. We obtained numerical equivalent property values by using finite element analysis and compared the values with theoretical formulas. Al-AlN should become the optimal composite material when the proportion of the reinforcing phase is approximately 0.45.

• Composites Research
• /
• 제27권2호
• /
• pp.72-76
• /
• 2014

본 연구에서는 알루미늄 합금으로 된 경사진 이중외팔보의 충돌에 대해서 각각의 충격속도 2.5m/s, 7.5m/s, 12.5 m/s 별로 실험과 시뮬레이션 해석을 하였다. 접착부분에 발생하는 에너지 해방율과 응력을 평가하여 알루미늄 합금의 기계적 특성을 고찰하였다. 실험상에서는 접착 부분에서 에너지 해방율의 값이 높은 것으로 나타났다. 이는 실험에서 시험편이 분리된 후에도 접착력이 유지되는 특성 때문인 것으로 사료된다. 충격속도와 상관없이 균열이 진전하다가 접착된 부분의 끝에서 높은 응력을 발생하기 때문에 최대 등가응력은 마지막 단계에서는 올라간다. 본 연구에서의 실험 및 해석결과들은 충돌에 의한 균열 진전을 방지할 수 있는 복합재료에 대한 안전설계의 개발에 필요한 자료로 사료된다.

• Structural Monitoring and Maintenance
• /
• 제3권2호
• /
• pp.175-194
• /
• 2016

Based on the change of traditional viscoelastic damper structure, a brand-new damper is designed to control simultaneously the translational vibration and the rotational vibration for platforms. Experimental study has been carried out on the mechanical properties of viscoelastic material and on its multi-dimensional seismic response control effect of viscoelastic damper. Three types of viscoelastic dampers with different shapes of viscoelastic material are designed to test the influence of excited frequency, strain amplitude and ambient temperature on the mechanical property parameters such as circular dissipation per unit, equivalent stiffness, loss factor and storage shear modulus. Then, shaking table tests are done on a group of single-storey platform systems containing one symmetric platform and three asymmetric platforms with different eccentric forms. Experimental results show that the simulation precision of the restoring force model is rather good for the shear deformation of viscoelastic damper and is also satisfied for the torsion deformation and combined deformations of viscoelastic damper. The shaking table tests have verified that the new-type viscoelastic damper is capable of mitigating the multi-dimensional seismic response of offshore platform.

• 한국재료학회지
• /
• 제16권7호
• /
• pp.430-434
• /
• 2006

Au/Ni coatings are widely used in the electrical interconnect system, such as connectors, sockets and wire crimps. But due to repeated mechanical contacts, fretting corrosion occurs and causes a rapid increase in resistance. As an attempt to resolve these problem, application of Ni-P-PTFE to replace Ni undercoats was proposed, for which basic materials properties of Ni-P-PTFE coatings for preventing fretting corrosion was examined in this study. The Ni-P-PTFE coatings were formed by electroless Ni plating and PTFE coating followed by the heat-treatment. PTFE particles were found to be uniformly distributed in the Ni-P matrix. The Ni-P-PTFE coatings showed the excellent anti-adherent property with the contact angle of $104.3^{\circ}$, microhardness of 144.3 Hv comparable to that of Ni-P, and electric conductivity equivalent to that of Ni-P.

• International Journal of CAD/CAM
• /
• 제8권1호
• /
• pp.1-10
• /
• 2009

This paper presents a topology optimization approach using element-free Galerkin method (EFGM) for the optimal design of compliant mechanisms with geometrically non-linearity. Meshless method has an advantage over the finite element method(FEM) because it is more capable of handling large deformation resulted from geometrical nonlinearity. Therefore, in this paper, EFGM is employed to discretize the governing equations and the bulk density field. The sensitivity analysis of the optimization problem is performed by incorporating the adjoint approach with the meshless method. The Lagrange multipliers method adjusted for imposition of both the concentrated and continuous essential boundary conditions in the EFGM is proposed in details. The optimization mathematical formulation is developed to convert the multi-criteria problem to an equivalent single-objective problem. The popularly applied interpolation scheme, solid isotropic material with penalization (SIMP), is used to indicate the dependence of material property upon on pseudo densities discretized to the integration points. A well studied numerical example has been applied to demonstrate the proposed approach works very well and the non-linear EFGM can obtain the better topologies than the linear EFGM to design large-displacement compliant mechanisms.

• 한국산학기술학회논문지
• /
• 제15권10호
• /
• pp.5974-5979
• /
• 2014

압입 방식으로서 경량화된 부품이 매우 균질한 정밀도로 생산이 되며 프레스의 기술이 향상되고 있다. 압입 방식으로 조립하였을 시 핀과 구멍사이에는 압축력에 의한 변형력이 발생되고 접촉면이 손상을 입는다. 따라서 본 연구에서는 CATIA 프로그램을 이용하여 3D 모델링하였으며, ANSYS 프로그램을 통하여 압입 접촉된 평면에서 손상평가를 하였다. 해석결과, 핀이 들어갈 때 PCB판에 작용하는 하중은 약 21.3N인 것으로 확인되었으며, PCB판이 Pin에서 빠져나올 때의 하중은 약 19.24N으로 나타났다. 또한 구조 해석결과, Pin 1이 본 연구 모델의 모든 부품들 중에서 가장 최대응력이 많이 발생하므로, 대표적으로 Pin 1의 최대 등가응력이 192.96MPa로 나타났다. 압입 접촉 손상 특성을 규명하고 본 연구결과를 실제의 압입 공정의 설계에 응용함으로서 그 파손을 방지하고 내구성을 평가할 수 있다고 사료된다.