• 자연과학논문집
• /
• 제12권1호
• /
• pp.103-110
• /
• 2002

The aim of this study was to analysis the landscape equipments of 42 school gardens in Taejon metropolitan city. Outdoor educational landscape equipments were found out at 10 schools out of 42 schools. The materials of main entrance were consisted of steel and stone at 19 schools. The stands at front of the main ground were existed at 21 schools. The pergolas and benches were existed at 20 schools. The living material fences were found out at 21 schools. Plant nameplates were found out at 22 schools. But the contents of the nameplates were so poor. The wetland and roof garden of the school were not existed. School landscape equipments should be introduced by the distinction of elementary school, middle school, and high school as well as by the space of the school site.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.208-213
• /
• 2008

In recent society, the quality of human life has improved due to the use of electric appliances and the high powered electrical equipments. However, lots of electric appliances and equipments generate the electromagnetic field hazard. Many studies have been made about the wrong behavior of machines due to electromagnetic fields, the interferences in communication equipments, the possibility of the electromagnetic field hazard in human body, etc. There exist international standards about the RF equipments (ex. mobile phone, antenna, etc.). But, many researchers involved in power frequency electric and magnetic field only propose the prudential avoidance. In this paper, induced currents in a human body model due to magnetic fields in high speed railway are calculated by two dimensional impedance method. Power frequency(60Hz) magnetic fields are calculated and induced currents are simulated by Faraday's law. Induced currents are simulated with induced voltage, human body model impedances due to Ohm's law, magnetic fields derived from Biot-Savart's law and Transmission Line Method in high speed railway.

• 한국항만학회지
• /
• 제11권2호
• /
• pp.273-280
• /
• 1997

Recently the importance of the cargo handling equipments in a port has been increasing to get strong competition from other ports. Many ports are making efforts to modernize their cargo handling equipments. The kernel technology of such equipments is the speed control of DC motor which is used as an essential part of them. In this paper, we discuss the speed control of a DC motor as a basic work for building cargo handling equipments in a port. DC Motors are still widely used in industrial fields, as driving power motor for electrical fields. DC drives, being easy to control, are widely used in many variable-speed and position control drive system. Traditional analog control circuits used in such applications have many disadvantages. Complex control schemes are difficult to implement with analog components. All these factor and invention of the microprocessor has made it possible to use digital control circuits, using microprocessing system. These digital circuits have been found to be reliable, flexible, and also immune to noise. In this paper it presents the speed control of a SCR DC motor driver which using dual converter by 80c196kc microprocessor. We developed a thyristor power amplifier which does not cause damage thyristor because it is designed to prevent triggering the two SCRs in the same arm simultaneously. And it was analyzed voltage and currents wave at reactive load.

• 한국항해항만학회지
• /
• 제31권3호
• /
• pp.253-261
• /
• 2007

본 연구는 컨테이너 터미널의 하역시스템을 새롭게 구성하고 그 성능을 평가하는데 목적을 두고 있다. 기존 터미널에서 사용되고 있는 하역장비는 기능이나 설계구조 측면에서 유연성이 부족하며, 이를 기반으로한 하역시스템 구성은 상당부분 이전에 설계된 형태이기 때문에 성능과 기능면에서 터미널의 생산성을 향상시키는데 한계가 있다고 할 수 있다. 일반적으로, 컨테이너 터미널의 하역시스템은 크게 안벽시스템, 이송시스템, 야드시스템, 게이트시스템의 4가지 하위시스템으로 구분될 수 있으며, 이들 각 하위시스템은 적합한 시설과 장비를 사용하여 터미널의 하역서비스를 수행하고 있다. 이에, 본 연구에서는 기존보다 우수한 성능 및 기능을 갖춘 여러 장비를 토대로 다양한 시설배치에 적용한 차세대 하역시스템 설계안을 제시하고, 그 성능을 평가해 보았다.

• 컴퓨터교육학회논문지
• /
• 제11권1호
• /
• pp.23-32
• /
• 2008

본 논문에서는 논리회로 실험용 장비 사용법 및 실험 내용에 대한 교육용 멀티미디어 콘텐츠로 구성된 논리회로 가상실험실이 실제 실험 교육에 끼치는 교육효과를 조사하였다. 대학 저학년의 공학 실험의 경우, 실험 회로 및 실험 장비 사용법에 대한 사전 이해가 절실히 요구된다. 그러나 기존의 전통적인 실험환경에서는 실험 장비 사용법 교육의 경우, 장비에 대한 접근성이 제한되어 있고, 짧은 실험시간 내에 다양한 기능을 설명하기에는 많은 제약이 있으며, 실험회로의 다양한 동작에 대한 경험은 실제 실험에서나 가능한 문제점이 있다. 본 논문에서 구현한 논리회로 가상실험실에서는 실제 실험 전에 실습자에게 실제 실험과 같은 환경을 제공하여 사전에 실험 준비를 할 수 있도록 한다. 가상실험실을 활용한 집단과 그렇지 않은 집단인 30명 단위의 두 실험 집단에 대해 가상실험실의 교육효과를 조사한 결과, 가상실험실을 활용한 집단이 한 학기 실험과정에서 평균 8.2% 정도의 실험시간 단축을 보였다.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2004년도 제29회 추계학술대회 발표논문집
• /
• pp.59-63
• /
• 2004

IAEA에서 제공한 선량기준은 서양 사람을 기준으로 개발된 것이어서 우리 한국 사람에게는 맞지 않고, 상대적으로 우리나라의 환자선량은 적으리라 예상된다. 따라서 선량기준을 따로 개발해야할 필요가 있다. 그래서 본 연구팀은 병원협회에 등록되어 있는 종합병원 278개를 대상으로 환자 피폭에 대한 설문조사를 실시하였다. 설문회수율은 57.9%였으며 각 병원에서의 촬영조건을 기초로 NDD법을 이용하여 환자 피폭선량을 계산하였고 설문지를 분석한 결과를 보고한다.

• 대한전자공학회논문지TC
• /
• 제48권1호
• /
• pp.55-61
• /
• 2011

본 논문에서는 device-to-device (D2D) 시스템이 M 개의 셀룰러 단말기들과 상향 링크의 주파수 자원을 공유할 때 셀룰러 단말기들에 의한 간섭과 D2D 통신 단말기 쌍의 신호의 파워 비에 따른 outage 확률을 분석한다. 이 때, D2D 통신 전송기의 최대 전송 파워는 셀룰러 네트워크에 어떠한 해로운 간섭도 발생하지 않게 하기 위해서 엄격하게 제한된다. 수학적 모델에 의해 D2D 통신 수신기의 outage 확률은 셀룰러 사용자 단말기들에 의해 발생하는 간섭 대 선호 비 및 셀룰러 사용자 단말기의 개수, M에 의한 함수로 표현된다. 또한, 셀룰러 사용자 단말기들에 의해 발생하는 간섭 대 신호 비는 D2D 통신 단말기 쌍, 셀룰러 사용자 단말기들, 및 기지국과의 거리의 함수로 표현된다. 얻어진 outage 확률을 이용해서, D2D 통신 시스템의 신뢰성을 쉽게 평가할 수 있다. 또한, 분석의 타당성을 입증하기 위해 모의실험들을 제공한다.

• 대한디지털의료영상학회논문지
• /
• 제9권2호
• /
• pp.23-30
• /
• 2007

This study attempts to propose an appropriate method of using digital medical imaging equipments, by studying the effects of automatic exposure control(AEC), grid ratio and the change of radiography distance on the patient dose and detertor acquisition dose during the procedure of acquiring image through a digital medical imaging detector. The change of dose following the change of grid ratio's exposure and radiography distance was measured, by using an abdominal phantom organized with tissue equivalent materials in an amorphous silicon thin film transistor detecter installed with AWC. The case to use grid ratio 12 : 1, focal distance 180cm to radiography distance 110cm in AEC, the patient dose increased rather when we used grid ration 10 : 1, focal distance 110cm. When AEC was not used,the dose necessary for image acquisition decreased as the grid ratio became higher and the distance became further. but detector acquisition dose was not reduced when in applied AEC. When purchasing digiral medical imaging equipments, optional items such as AEC and grid shall be accurately selected to satisfy the use of the equipments. Radiography error made by radiation technologist and unnenessary patient dose can be reduced by selecting equipments with a radiography distance marker equipment when it did not apply AEC. These equipments can also be helpful in maintaining high imaging quality, one of the merits of digital detectors.

• 품질경영학회지
• /
• 제48권3호
• /
• pp.395-408
• /
• 2020

Purpose: This study was performed for advancement of aviation security equipments certification system. Methods: We investigated aviation security equipments certification-related registrations and the latest research trends of explosive detection technologies. Based on the literature studies, we draw the critical issues of the aviation security equipment certification system and suggested improvement direction. Results: We found some inaccuracies of the definition of explosive trace detection equipments, accreditation review committee, and performance evaluation test method. These problems should be modified to suit being practical. Conclusion: The present results would be useful for basic data for modifying aviation security equipments certification systems.

• 대한방사선기술학회지:방사선기술과학
• /
• 제8권2호
• /
• pp.3-9
• /
• 1985

From the study on the chest radiologic equipments and situations of university hospitals, general hospitals, and radiologic clinics located in Seoul area and Choong-cheong province, the author got conclusions as follows : 1. The rectfication methods of the equipments were employing mainly single or three-phase full wave, and 78% of the examined were using single phase full wave. 2. The focal sizes in case of small focus were less than 1.0mm in chest-only use, and more than 1.0mm in 81% of combined use. The focal sizes in case of large focus were more than 1.6mm in 78% of the total. 3. Maximum ratings of x-ray tubes were 47% at 125 kVp maximum tube voltage and 41% at 150kVp. The maximum tube currentes higher than 500mA were shown in 72% of all the examined. And the maximum exposure time was the range of 5-8sec. 4. Grid was not used in the 66% of all the hospitals. Equipment for chest-only was employing 10:1 grid ratio and the 2.0-2.9mmAl of total filtration formed 38% of all the examined. 5. In the processing time of exposed film, 68% of all was 90sec, and only 20% of all the examined used optimum developing temperature according to this condition. 6. In the radiographic conditions, more than 50% used low tube voltages lower than 70 kVp and only 3% of all the equipments used high tube voltages higher than 100 kVp. The 46.9% of all the equipments 300mA, and 53% of all used shorter exposure time less than 1/20(0.05) sec. 7. In the monthly average number of radiographs, 44% of all was x-ray the radiographs.