• 대한치과기공학회지
• /
• 제33권1호
• /
• pp.93-102
• /
• 2011

Purpose: The study aimed to evaluate working environment for dental technician by measuring dust level, ventilation conditions and the use of personal protective equipment and to provide basic information required to improve working environment and develop health education programs for dental technician. Methods: A total of 240 dental technician who are registered with the Daegu Association of Dental technician and working at 34 dental laboratories participated in the study. And the dust level was measured at 21 different spots in 16 dental laboratories out of 34. Results: Of 34 dental laboratories, 31 (91.2%) were equipped with a ventilator, but the remaining 3 (8.8%) did not have a ventilator. By the number of ventilator, 1 to 3 ventilators were found in 22 dental laboratories (71.0%), 4 to 6 ventilators were in 7 laboratories (22.5%) and more than 7 ventilators in 2 laboratories(6.5%). According to the frequence of changing filters in dust collector, 20 dental laboratories (58.9%) changed filters every four weeks, 10 laboratories (29.4%) changed them every six weeks and 4 laboratories (11.7%) changed them every eight weeks. Of total respondents, 114 (61.3%) said they wore a mask all the time while working, 56 (29.6%) said they frequently wore a mask, 19 (10.1%) said they did not wear a mask. As for the type of masks, 159 (84.1%) used a disposable mask, 25 (13.2%) used a cotton mask and 5 (2.7%) used an anti-dust mask. For dust sat on their outfits while working, 102 (54.0%) shook their uniforms inside workplace to keep dust off the uniforms, 64 (33.9%) did not anything until they wash their uniforms and 23 (12.1%) shook their uniforms outside workplace to keep dust off the uniforms. Of total respondents, 182 (96.3%) had a particle in their eyes while carrying out grinding work. Based on the measurement of floating dust at workplace, 3 dental laboratories showed dust concentration exceeding the minimum level of 10 mg/$m^3$ allowed under the permit for environment. Of those, 1 laboratory had the dust concentration that was more than 1.5 times higher than the minimum level. Dust concentration was higher in laboratories that used a dust collector with 0.5 horse power and changed filters more than 3 weeks ago. Dust comprised of nickel (more than 70%), chrome (9%) and others. The mean chrome concentration was more than twice higher than the minimum permissible level of 0.5 mg/$m^3$. There were two laboratories that showed chrome concentration exceeding the level of 0.4 mg/$m^3$. Like dust concentration, chrome level was higher in laboratories that used a dust collector with 0.5 horse power and changed filters more than 3 weeks ago. There were six laboratories that had nickel concentration exceeding the minimum permissible level of 1 mg/$m^3$. Of those, one laboratory had nickel concentration that was more than three times higher than the minimum permissible level. Nickel concentration was also higher in laboratories that used a dust collector with 0.5 horse power and changed filters more than 3 weeks ago. Conclusion: It is not likely that heavy metal concentrations found in the study constitute respiratory dust. It is however necessary for health of dental technician to apply the Industrial Safety and Healthy Law to dental laboratories and make recommendations for the use of personal protective equipment, installation of a proper number of ventilators, more frequent change of filters in dust collector and improved ventilation for polishing work. At the same time, dental technician need education on how to use personal protective equipment and how to efficiently remove dust from their uniforms.

• 생명과학회지
• /
• 제20권12호
• /
• pp.1867-1871
• /
• 2010

본 연구는 건강한 성인을 20명을 대상으로 AB spur를 착용하고 12주 복식호흡 운동을 함에 따라 신체적 특성및 체지방률(% body fat), 체질량지수(BMI), 복부 비만율(Waist/Hip ratio)의 변화를 검증하여 비만과 관련되어 복식호흡의 중요성 강조 및 비만관련 인자 감소에 있어 기초자료로 제공하려는데 목적이 있다. 본 연구의 대상자는 모두 D 대학교에 재학중인 대상자(총 20명; 남: 3 명, 여: 17명)들로 문진을 통하여 사전과 현재 병력을 조사하여 의학적으로 질환이 없는 대상자로 구성하였다. 본 연구를 수행하기 위해 복식호흡기기를 이용한 복식호흡훈련을 충분히 숙지 시킨 후에 하루 6시간, 12주간 매일 착용하게 하였다. 복식호흡 방법은 크게 들이쉬기(2~3초), 숨정지(1~2초), 내쉬기(약 4~5초) 순서로 하였으며, 정확한 호흡을 유도하기 위하여 AB spur를 착용하고, 숨을 들어 마시며 복부를 최대한 내밀어준다. 본 연구결과 12주 복식호흡 훈련은 체중 및 체지방률, BMI, 복부 비만도를 유의하게(p<0.05) 감소시켰고 이는 비만과 관련하여 의미 있는 결과라 사료된다. 추후 운동과 더불어 비만자에 있어 이러한 복식호흡의 중요성을 강조하면 비만에 따른 체중 및 체지방 감소에 보다 효과적인 방법을 제시할 수 있을 것으로 사료된다.

• 한국방사선학회논문지
• /
• 제6권4호
• /
• pp.313-320
• /
• 2012

현재 의료기관은 의학 기술의 발전과 더불어 건강에 대한 관심이 고조됨에 따라 방사선 발생장치의 이용이 급증하고 있다. 방사선으로 인해 환자가 받는 직접적인 피폭을 가능한한 줄이는 목적도 중요하지만 촬영시 공간 내에서 받을 수 있는 간접적인 피폭을 줄여 의료업에 종사하는 의료인, 방사선 작업종사자 및 보호자의 피폭을 줄여야 한다. 엑스선 촬영실에서는 방사선작업종사자 및 보호자에게 방호복의 착용을 권고하고 있으나 불가피하게 방사선작업종사자 및 보호자가 환자의 촬영 보조를 할 경우, 방호복 착용에 의한 중량감 및 불편함 때문에 방호복 착용이 등한시 되고 있다. 이에 본 연구에서는 방호복 유무에 따라 공간산란선량을 측정하고 거리, 가로면 각도 및 높이에 따라 측정함으로써 방호복 착용의 중요성을 알아보고자 하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권5호
• /
• pp.542-547
• /
• 2015

Since the oil price has been significantly jumped for several years, a heavy oil of low quality has been mainly used in the diesel engine of the merchant ship. Thus, a combustion chamber of the engine has been often exposed to severely corrosive environment more and more because temperature of the exhaust gas of the combustion chamber has been getting higher and higher with increasing of using the heavy oil of low quality. As a result, wear and corrosion of the engine parts such as exhaust valve, piston crown and cylinder head surrounded with combustion chamber are more serious compared to the other parts of the engine. Therefore, an optimum repair welding for these engine parts is very important to prolong their lifetime in a economical point of view. In this study, Inconel 625 filler metal were welded with GTAW method in the cast steel which would be generally used with piston crown material. And the corrosion properties of weld metal, heat affected and base metal zones were investigated using electrochemical methods such as measurement of corrosion potential, anodic polarization curves, cyclic voltammogram and impedance etc. in 35% $H_2SO_4$ solution. The weld metal and base metal zones exhibited the highest and lowest values of hardness respectively. Furthermore, the corrosion current density of the weld metal zone revealed the lowest value, having the highest value of hardness. The corrosive products with red color and local corrosion like as a pitting corrosion were considerably observed at the base metal zone, while these morphologies were not wholly observed in the weld metal zone. In particular, the polarization characteristics such as impedance, polarization curve and cyclic voltammogran associated with corrosion resistance property were well in good agreement with each other. Consequently, it is suggested that the mechanical and corrosion characteristics of the piston crown can be predominantly improved by repair welding method using the Inconel 625 electrode.

• 한국해양공학회지
• /
• 제30권4호
• /
• pp.334-340
• /
• 2016

The combustion chamber of a diesel engine is often exposed to a more serious wear and corrosion environment than other parts of the engine because its temperature increases as a result of using heavy oil of low quality. Therefore, repair and built-up welding methods must be performed on worn or corroded parts of the piston crown, exhaust valve, etc. from an economical point of view. In this study, Inconel 718 filler metal was used in repair welding on the groove of a forged steel specimen for a piston crown, along with built-up welding on the surface of another forged steel specimen. Then, the corrosion characteristics of the weld metal zone for the repair welding and the deposited metal zone for the built-up welding were investigated using electrochemical methods in a 35% H₂SO₄ solution. The deposited metal zone indicated better corrosion resistance than the weld metal zone, showing a nobler corrosion potential, higher impedance, and smaller corrosion current density. It is considered that metal elements with good corrosion resistance were generally included in the filler metal, and these elements were also greatly involved in the deposited meta by built-up welding, whereas the weld metal consisted of metal elements mixed with both the filler metal and base metal elements because of the molten pool produced by the repair welding. Finally, it is considered that the hardness of the weld metal was increased by the repair welding, whereas the built-up welding improved the corrosion resistance of the deposited metal.

• 한국초등과학교육학회지:초등과학교육
• /
• 제42권1호
• /
• pp.82-92
• /
• 2023

본 연구에서는 초등학생들의 과학 수업에 대한 일반적인 특성과 실험 안전 인식을 분석하였다. 초등학생들의 과학 학습에 대한 정의적, 행동적, 인지적 영역 인식과 일반적 특성은 다음과 같다. 첫째, 초등학생들은 과학 수업을 보통 이상 좋아하고, 과학 탐구 기능을 보통 이상 잘한다고 인식하며, 과학 지식을 보통 이상 가지고 있다고 인식한다. 코로나 19 상황 이전과 비교해 보았을 때, 초등학생들은 과학 지식 보유에 대한 자신감이 많이 낮아졌다. 둘째, 전체 여덟 개의 유형 중에서 가장 이상적인 학생 유형인 상상상 유형이 가장 많이 분포되어 있다. 셋째, 초등학생들은 과학 수업 방법에 대해 실험 수업(72.7%), 자연 탐구 수업(23.2%), 과학 지식 이해 수업(4.1%) 순으로 선호하였다. 또한, 초등학생들은 수업 장소에 대해 초등학생들은 과학실(58.1%), 때에 따라 다른 장소(34.4%), 교실(7.5%) 순으로 선호하였다. 초등학생들의 실험 안전에 대한 인식은 다음과 같다. 첫째, 대부분의 초등학생들은 실험 수업에 대해 안전사고 발생의 부담을 느끼지 않는다. 둘째, 과반수 이상의 학생들은 실험 기구 사용법을 이해하고 있다고 인식한다. 셋째, 대부분의 학생들이 안전 장비 착용이 필요하다고 인식한다. 넷째, 대부분의 학생들이 응급 처치 교육이 필요하다고 인식하고 있으나, 응급 처치 방법을 이해하고 있는 학생들의 비율은 31.5%에 불과하다. 본 연구 결과를 바탕으로 과학 학습과 실험 안전에 대한 시사점을 논의하고자 한다.

• 한국컴퓨터정보학회논문지
• /
• 제28권7호
• /
• pp.113-120
• /
• 2023

본 연구는 심폐소생술 시 착용하는 마스크의 유형에 따라 심장압박의 정확도, 피로도 및 생리학적 변화를 파악하고자 한다. 연구는 2022년 5월 9일부터 12일까지 D대학교 응급구조과 재학생 중 BLS provider를 소지하고 있는 학생 총 24명을 대상자로 선정하여 수술 마스크(Dental mask), 미세입자 94%차단마스크(KF94 mask)를 각각 12명씩 착용하고 총 7회에 걸쳐 2분간 심폐소생술을 실시하였다. 연구 결과, 마스크 유형에 따른 구조자의 가슴압박의 질 분석에는 KF94를 착용한 그룹에서 압박속도(F=24.91, p<.001),와 손의 위치불량(F=14.54, p=.024)에서 유의한 차이를 보였고, 피로도를 분석한 결과에서는 Dental mask그룹(F=51.16, p<.001)과 KF94그룹(F=63.49, p<.001) 모두에서 유의한 차이를 보였다. 생리학적 변화를 분석한 결과에서 심박동수를 살펴보면, Dental mask그룹(F=34.79, p<.001)과 KF94그룹(F=35.55, p<.001) 모두에서 유의한 차이를 보였고, 호흡수 측정결과에서도 Dental mask그룹(F=25.02, p=.001)과 KF94그룹(F=23.03, p=.002) 모두에서 유의한 차이를 보였다. 따라서 현장활동의 가장 중요한 심폐소생술시에는 효율적인 가슴압박의 정확도와 구조자의 피로도 및 생리학적 변화의 감소를 위해서는 구조자의 유형에 따른 개인보호장비를 착용하는 것이 필요할 것이다.

• 한국운동역학회지
• /
• 제27권3호
• /
• pp.219-227
• /
• 2017

Objective: The aim of this study was to analyze the effects of bobsleigh shoes on the lower extremity range of motion and start speed lap time and to develop bobsleigh shoes suitable for winter environments and Korean players based on sports science and optimized biomechanical performance. Background: The bobsleigh shoes used in the start section of the sport are one of the most important equipment for improving athletes' performances. Despite the importance of the start section, there are no shoes that are specifically designed for Korean bobsleigh athletes. Thus, Korean athletes have to wear sprint spike shoes instead of bobsleigh shoes to practice the start. Method: The subjects included four bobsleigh athletes from the Gangwon Province Bobsleigh Skeleton Federation. The study selected the bobsleigh shoe type A (company A) and type B (company B). We analyzed the lower extremity range of motion and sprint time (start line to 10 m) using a Motion Analysis System (USA). Results: In the measurement of the time required for the bobsleigh start section (10 m), the type A shoes demonstrated the fastest section record by $2.765{\pm}0.086sec$ and yielded more efficient movements, hip and knee flexion, hip extension, ankle dorsiflexion, plantar flexion, and inversion than the type B shoes. Conclusion: Type A shoes can yield a better performance via effective lower extremity movements in the bobsleigh start section. Application: In the future, functional analysis should be conducted by comparing the upper material properties, comfort, and muscle fatigue of bobsleigh shoes based on the Type A shoes to develop such shoes suitable for Koreans.

• 한국의류학회지
• /
• 제34권4호
• /
• pp.553-562
• /
• 2010

This survey investigates the conditions of summer working uniforms for contracted foodservice workers. The data were obtained from 67 workers through in-depth interviews (July 2005~October 2005). The results of study are as follows: The working environment changed to menu and cooking method (air temperature $28\sim37^{\circ}C$, humidity 72~86 %RH, radiant temperature $27\sim37^{\circ}C$, air velocity 0.14~0.37m/sec). They answered that the working environment has high temperatures, humidity, excessive noise, and liability to slide. The typical accidents were burns, cuts, slide, and ligament injuries in the workplace. Work duties consisted of cooking, serving food, washing, and cleaning up leftover food. All the employees carried out multi tasks. The primary working postures and motions were standing, crouching, and lifting. The female workers usually wore underwear (panty and brassiere), upper and lower work wear, aprons, waterproof-aprons, cotton-gloves, rubber-gloves, socks, and rubber-boots. The satisfaction of the uniform was relatively low for trousers and waterproof-aprons. The answer about the fit was generally "comfortable." They answered "back," "chest," and "head" were wet with perspiration during work. The uncomfortable parts were the crotch and neck. Questions concerning their satisfaction with the material of uniforms indicated a high rate of dissatisfaction, particularly for ventilation and absorbency. In case of the colors of the working uniform, workers preferred white color for the upper part, and black color for the lower part.

• 대한안전경영과학회지
• /
• 제9권3호
• /
• pp.55-61
• /
• 2007

In general, it is fact that most educational institutions have lots of problems about shift of education facility and equipment because of insufficient budget. However, most high school girls live a lot of period in the school and most of them wear student uniform. Thus, it is necessary that educational environment has to be improved by actual body size of high school girls. The main objective of this study is to provide numerical guideline for the improvement of educational environment about high school girls ($17\sim19$ years) through comparison and analysis on physical standard of nation (report published in 1997). The sample for this work chosen from data which were collected and measured by Size Korea during two years $(2003\sim2004)$. In order to analyze feature of the somatotype of high school girls, analysis was performed about 734 subjects on 25 body parts such as height (7 parts), width (4 parts), thickness (4 parts), circumference (5 parts), length (4 parts) and body weight. For the specific comparison on somatotype, $R\ddot{o}hrer$ index and Mollison's comparison graph were used. The result of this study can be utilized in various fields such as design of classroom, student uniforms, facilities and equipments for education, etc.