• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2004년도 춘계학술대회 논문집
• /
• pp.63-68
• /
• 2004

The objective of this paper is to analyze the combined productivity at container terminal. We present a mode3 for combined productivity that perform the container transportation between apron and yard. Usually, the efficiency of container terminal is evaluated by productivity of container cranes at apron, but there are other equipment such as transport vehicles and yard cranes. Therefore, a method that can estimate the combined productivity of equipment of container terminal is required. We performed various simulation experiment and analyzed combined productivity to estimate the required number of equipment.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.226-230
• /
• 2013

In the tall building construction, the slab formwork largely impacts on construction cost. Because productivity of a slab formwork is influenced by a number of and the efficiency of equipment, using the equipment-based construction method, an appropriate equipment input planning is crucial for the productivity. Meanwhile, the general equipment input planning is conducted by intuition based on experience due to the lack of equipment productivity data. Thus, this study develop a simulation model to analyze table formwork productivity and to propose an optimum equipment input plan that reflects the construction process, based on the full consideration of the economic factors. This study developed a simulation model by using CYCLONE and the data for the model was collected by measuring the duration of each unit activity in the tall building where table forms were applied. It is expected that a simulation model helps users to make better decision on the equipment input planning of slab formwork.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 추계학술대회
• /
• pp.289-295
• /
• 2004

본 연구의 목적은 컨테이너터미널의 하역시스템 장비조합을 분석하는 것이다. 일반적으로 컨테이너터미널의 생산성은 안벽에서 컨테이너크레인의 생산성에 의해 평가되고 있으나 이송차량과 야드크레인과 같은 다른 장비도 있다. 그러므로 컨테이너 터미널에서 하역시스템의 최적장비조합을 추정할 수 있는 방법이 요구된다. 다양한 시뮬레이션 실험을 수행하고 생산성 향상을 위한 장비조합을 분석한다. 사례연구의 적용으로부터 장비조합에 따른 평균대기시간비율을 사용하여 절감효과를 설명하였다.

• 대한안전경영과학회지
• /
• 제19권1호
• /
• pp.219-226
• /
• 2017

This study investigates application cases of facility management system model for enhancing facility productivity of industry filed around medium and small facility processing companies and finds the inefficiency of the existing management model. Following items are researched to seek out methods and measures to maximize facility productivity through empirical analysis by exploring and establishing a new management model. First, the empirical analysis, it is found that the overall equipment efficiency index used for facility productivity management in the companies has a difficulty being used as the index for it in actual medium-small processing companies. Second, a new facility management system model applying standard cycle time is suggested among facility management index system to measure facility productivity. Third, the empirical analysis is used to verify that developed facility management system model is a useful method to manage the facility productivity by applying the model to actual medium-small processing companies. Finally, it is necessary to implement comparison analysis on whether actual productivity enhancement induces a distinctly different result by using a new facility management index system model to be inhibited in this study.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2004년도 춘계공동학술대회 논문집
• /
• pp.656-659
• /
• 2004

The objective of this paper is to analyze the combined productivity at automated container terminal. We present a simulation model for transport vehicle that perform the container transportation between apron and yard with a perpendicular yard layout. Usually, the efficiency of container terminal is evaluated by productivity of container cranes at apron, and though there are enough support of transport vehicles and yard cranes, can improve the productivity of container cranes. Especially, transport vehicle is very important factor in productivity of container cranes and has variable work productivity according to loading and unloading situation. Therefore, a method that can estimate combined productivity of equipment is required. We performed various simulation experiment and analyzed combined productivity to estimate the required number of equipment.

• 통상정보연구
• /
• 제16권4호
• /
• pp.55-75
• /
• 2014

본 연구는 국내 ICT 제조업과 서비스업의 경쟁력 강화를 위한 기초 연구로서 효율성과 생산성 추이 및 생산성의 결정요인을 분석하는 것을 목적으로 하였다. 구체적으로 본 연구는 ICT산업의 효율성 분석을 위해 ICT 제조업 23개 업종과 ICT 서비스업 18개 업종에 대하여 2007년부터 2011년까지 5년간 규모의 수익불변을 가정한 DEA(Data Envelopment Analysis)의 CCR모형과 규모의 수익가변을 가정한 BCC모형을 통해 기술효율성과 순수기술효율성의 정태적 효율성을 살펴보고, 기술효율성에 대한 DEA/Window 분석과 Malmquist 생산성 지수를 이용하여 동태적 효율성을 분석하였다.

• 반도체디스플레이기술학회지
• /
• 제7권2호
• /
• pp.39-43
• /
• 2008

Productivity is one of the performance indices of the semiconductor equipment in manufacturing viewpoint. Among many ways tried and adopted for improvement of the productivity of the FAB equipment, variation of equipment configuration was considered and its effect on the throughput was analyzed. Parallel machine cycle charts that were generated based on the equipment log were used in the analysis. Efficiency of the equipment due to change of the structure and the probability of the usage in the manufacturing process were examined. The results showed that the modification of the control algorithm in the equipment and the redistribution of the process time for each process and transfer module along to the change in the structure enhance the throughput of the equipment.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.173-175
• /
• 2013

In tall building construction, the equipment operation plans have an effect on productivity. Equipment, used in tall building construction, has operating plans of each it and restrictively operate owing to the first placed equipment operation. Therefore the interference of equipment was occur frequently. As it, the productivity is less effective and the construction delay occurs. This research was analysis the interference elements between the equipment for constructing the efficient equipment associated operational processes. The interference elements between the equipment derive through expert advice and analysis using IPA. Through the IPA, this research deducted the interference elements located 'Concentrate Here' which is the highest importance and the lowest performance.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1259-1260
• /
• 2006

Intensive technological research on the Dry-bag CIP equipment was carried out to improve the dimensional accuracy and the productivity. The rubber mold design technology using FEM simulation during pressing was introduced, in order to achieve higher dimensional preciseness, and criteria for the selection of the In-line type or Off-line type, were established based on the powder flowability index proposed by Carr. Based on these research results, high productivity Off-line Dry-bag CIP equipment, which can realize good dimensional accuracy with high productivity, was developed even for non-granulated powders with poor packing density.

• 대한안전경영과학회지
• /
• 제12권2호
• /
• pp.113-123
• /
• 2010

The goal of this study is to analyze an effect of productivity elevation. For the goal, the various methods of the productivity elevation were suggested and the system improvements were conducted. The S company was established in Ban-Wol Industrial Complex, Ansan-City, Kyonggi-Do on 2007. The company was hiring 22 employees. The main manufactures were heavy duty equipment parts and the amount of sale was two billion won on 2008. Problems which the company faced were ambiguous production target management and materials loss. To solve the problems, NCT work improvement and automatic welding were induced. There were steel saving of 3,780,000won/month and man-hour saving of 144,000won/month by redesign of the steel sheet for the NCT steel job. Also, changing from handwork to automatic welding, the man-hour saving for the welding job was 320M/H and saving of 4,225,600won/month. The others of systematic improvement for productivity elevation were usage of jig and daily equipment checklist.