• 품질경영학회지
• /
• 제14권1호
• /
• pp.61-66
• /
• 1986

Many papers have suggested various models how to decide an optimal time for replacing equipment. In this study, Dynamic Programming is applied to establish a model of replacing equipment and a new algorithm is developed for computerization to meet the increased number of variables. It is possible to predict the real situation with higher accuracy by employing the proposed model including more variables such as planning horizon, original cost, salvage value, decreasing rate, operating and maintenance costs, increasing rate, and so on.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제23권2호
• /
• pp.27-35
• /
• 2017

Purpose: This study analyzed the status of general hospitals as an expanded concept of medical resources including medical staff and equipment. The purpose of this study is to provide a basic for the feasibility study of the scale and establishment of facility guidelines at the planning stage of general hospitals. Methods: The subjects of this study were limited to general hospitals. The status of medical resources was based on the data of the Health Insurance Review and Assessment Service. The number of beds, doctors, nursing grades and major medical equipment were surveyed in 335 general hospitals. Results: 1) The characteristic of general hospitals varies depending on the number of inpatient beds. To be concrete, there were differences in the number of medical staffs and equipments in general hospitals based on 300 500 800 1,000 beds. 2) As the number of hospital beds increases, the number of medical staff increases more than medical equipment and facilities. Medical equipment and facilities remain constant, even when the number of beds increases. On the other hand, the number of medical staff increased about 1.5 times in each level. Implications: Architectural plans for medical staff should be considered differently depending on the number of beds. In particular, architectural planning and facility guidelines should be applied differently based on 300 and 500 beds.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제27권4호
• /
• pp.7-14
• /
• 2021

Purpose: This study summarized architectural planning data for clinical practice spaces for CPX/OSCE and Simulation spaces, through analysis of domestic and foreign literature and a survey of domestic colleges of medicine. Methods: This study analyzed the architectural planning elements of the clinical practice spaces of the college of medicine, through a literature review on the clinical practice space and the survey of four recently established colleges of medicine. Results: ① It is desirable to plan the floor plan type for Simulation and CPX/OSCE spaces as a corridor-separated type that separates the circulations between students and staff (faculty). ② The simulation area arranges their practice rooms around the control space where the circulation of the staff is made. Conversely, it is desirable to arrange the CPX/OSCE rooms around the test waiting room where students enter. ③ It is desirable to separate access to the staff and students to allow student control, and to install various support spaces facing the staff corridor to secure the movement of equipment and the flow of evaluators. ④ In the simulation area, the equipment stored in the storage must be set in each room before the practice according to the setting of delivery or surgery like, and the equipment that has been removed must be back, so the circulation is short and does not intersect with the student circulations. ⑤ Debriefing rooms, seminar rooms, etc. are arranged in the staff area for review and discussion of clinical situations where practice and evaluation have been completed. Implications: It is important to configure an appropriate movement system and spatial zoning for each space for simulation and CPX/OSCE.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
• /
• pp.201-205
• /
• 2010

Earthwork is an essential initial work discipline in construction projects and open to significant impacts of several factors such as weather, site conditions, soil conditions, underground installations and available construction machinery, calling for careful planning by managers. However, selection and combination of construction machinery and equipment for earthwork still depends on experience or intuition of managers in construction sites, with much room left for proper management in terms of cost, schedule and environmental load control. This research aims to analyze the performance of earthwork equipment and establish relations among various factors affecting a model for optimizing selection and combination of earthwork equipment as a precursor to the development of such model. We expect the conclusions herein to contribute to optimizing selection and combination of earthwork equipment and provide basic inputs for the development of applicable model that can save costs, reduce schedule and mitigate environmental load.

• 한국실내디자인학회논문집
• /
• 제22권2호
• /
• pp.211-219
• /
• 2013

The purpose of this study is to propose the environmental planning guidelines of elementary school settings for a crime safety. The research methodologies To achieve the goal, the literature review analysis and the survey were used as main research methodologies. The survey is organized as follows. First, elementary education facilities were divided into 20 spaces based on the major space. Second, after analyzing the domestic and foreign CPTED Guidelines, elements of environmental planning were classified to fit in the space. Based on this, the expert survey was conducted. The results of this study are as follows; First, it is necessary to consider specific places such as 'toilets', 'parking lot', 'in-between space', 'main access road', 'sub-access road' and 'harmful facilities around school' for safer school environment. Second, it is significant to plan 'equipment facilities' and 'outdoor space in the school setting' with priority for elementary education environment. Third, environmental planning elements for safer elementary schools can be classified into 9 factors(types) including 'natural surveillance planning', 'territoriality reinforcement planning', 'mechanical surveillance planning', 'access control planning' and 'neighborhood reinforcement planning'. Forth, regarding 'indoor space', crime-free elementary school environment can be build through 'natural surveillance planning' and 'territoriality reinforcement planning'. Finally, regarding 'outdoor space', the crime can be prevented through 'natural surveillance planning' and 'access control planning'.

• 한국재난정보학회 논문집
• /
• 제11권4호
• /
• pp.570-580
• /
• 2015

본 연구는 교통정온화(Traffic Calming)기법 적용시 고려되어야 할 계획지표들을 도출하고 이를 토대로 교통정온화 기법 계획시 가장 고려되어야 할 지표들을 AHP분석을 통하여 중요도를 분석하고자 하였다. 계획지표에서의 결과는 도로구간과 교차점구간으로 나누어 요약할 수 있다. 도로구간에서는 감속자극장치의 경우 험프(0.35), 시각제어 장치에서는 이미지험프/폴트(0.31), 시케인에서는 슬라럼형도로(0.52), 통과경로의 차단에서는 볼라드(0.47)가 가장 계획시 중요하고 우선시 되는 것으로 나타났다. 교차점 구간에서는 시각제어장치의 경우 신호 표지(0.33), 감속 자극장치에서는 교차로올림(0.44), 시케인에서는 지그재그형 도로(0.65), 통과경로의 차단에서는 교차점의 직진차단(0.45)이 가장 계획시 중요하고 우선시 되는 것으로 나타났다. 본 연구의 결과는 향후 교통정온화 기법을 적용시 또는 정책수립시 기초적인 자료로 활용 될 수 있을 것으로 판단된다.

• 전기학회논문지P
• /
• 제57권2호
• /
• pp.202-208
• /
• 2008

Condition monitoring technologies allow achieving this goal by minimizing downtime through the integrated planning and scheduling of repairs indicated by condition monitoring techniques. Thermal runaways induced by conduction problems deteriorate insulating material and cause disruptive dielectric discharges resulting in arcing faults. Therefore, having the ability to directly measure the temperature of the contacts while in service will provide more information to determine the true condition of the equipment. It allows connective measures to be taken to prevent upcoming failure. Continuous temperature monitoring and event recording provides information on the energized equipment's response to normal and emergency conditions. On-line temperature monitoring helps to coordinate equipment specifications and ratings, determine the real limits of the monitored equipment and optimize facility operations. Using wireless technique eliminates any need for special cables and wires with lower installation costs if compared to other types of online condition monitoring equipment. In addition, wireless temperature monitoring works well under difficult conditions in strategically important locations. Wireless technology for on -line condition monitoring of energized equipment is applicable both as stand alone system and with an interface for power quality monitoring system. The paper presents the results of wireless temperature monitoring: of electrical equipment at a power plant.

• 산업기술연구
• /
• 제27권A호
• /
• pp.69-76
• /
• 2007

The body of an excavator, one sort of the construction equipment, consists of mainframe part, track frame part, boom part and arm part. The all parts are manufactured in the body welding operation. The scheduling in the body welding operation of a construction equipment manufacturing is to take all the various constraints into consideration. The offset time, due date, daily capacity of operations, daily jig's capacity, precedence relation, outsourcing, alternative resource and all of the shop floor environment should be considered. An APS(Advanced Planning & Scheduling) system is a proper and efficient system in such circumstance. In this paper, we present an APS system, the optimal scheduling system for the construction equipment manufacturing specifically for the body welding operation, using ILOG Solver/Scheduler. ILOG Solver/Scheduler is a general purposed commercial software which supports to find a feasible or optimal solution using object oriented technique and constraints satisfaction programming, given constraints and objectives.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.537-539
• /
• 2015

considerate operation is a major issue in the equipment-intensive operation. Identifying an optimal equipment combination is important to achieve low-energy operations. An Earthwork operation planning system, which measures the energy consumption of construction operations by taking into account construction equipments' engineering attributes (e.g., weight, capacity, energy consumption rate, etc.) and operation conditions (e.g., road condition, attributes of materials to be moved, geometric information, etc.), is essential to achieve the low-energy consumption. This study develops an automated computerized system which identifies an optimal earthmoving equipment fleet minimizing the energy consumption. The system imports a standard template of earthmoving operation model and compares numerous scenarios using alternative equipment allocation plans. It finds the fleet that minimizes the energy consumption by enumerating all cases using sensitivity analysis. A case study is presented to verify the validity of the system.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권4호
• /
• pp.248-255
• /
• 2015

Purpose : The purpose of this research is to develop the optimized method and process in the reliability-growth target setting, especially for complex and repairable system (or products) such as vehicle and airplane, construction equipment. Method : A reliability-growth test plan specifies a scenario to achieve the planned reliability value (or reliability target). The major elements in test planning are reliability-growth starting time and reliability level at that time, reliability-growth rate and reliability-growth target. All of them except a reliability target can be referred to the previous development data and reference researches. The reliability target level is directly influencing to test period (or time) which is related to test and warranty cost together. There are a few researches about the reliability target setting method and but showing the limitations to consider the views of engineering, business and customer together. There is no research how to handle the target setting process in detail. Result : We develop the optimized method and systematic process in reliability target setting with considering such views. This research also establish the new concept as production capability which means company (or supplier) capability to product its products. Conclusion : In this research result, we apply the new method to a few projects and can set the reasonable test planning. The developing results is showing the good balance between the developing cost and warranty cost at market.