• Journal of the Korean Professional Engineers Association
• /
• v.14 no.2
• /
• pp.5-11
• /
• 1981

This analysis has been conducted for 8 chemical plants built in Korea during 1975-1976 and the results have been compared with those in U.S.A. observed by Kenneth M. Guthrie. Equipment and materials supplied by domestic makers are limited in activity field and occupy only 12% of all equipment and material cost. However, unit costs of most materials supplied by home such as cement, steel, cables and carbon steel pipes, etc. being relatively cheaper than those of abroad, their effects on material-to-equipment ratios are apparent. There is a deep difference in labor wage rates between Korea and U.S.A. as much as 16 times. However, the labor productivity observed in these model projects is in the range of 1.1-1.4 to the Gulf Coast, U.S.A. during the same period. And this low wage rate and relatively high productivity have the greatest influence on deviation of Korean cost structure from that of U.S.A. In these model projects, engineering and construction management was conducted by foreign contractors (mostly U.S.A.), and the resulting project indirect cost amounts to 7.5 times as high as most cases executed by Korean contractors alone. Weighted percentage of each component and L/M-ratio by activities of direct field cost derived from this analysis are shown in detail in Tables 2 and 5 to provide a basis for futher study and comparison.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.624-631
• /
• 2022

Highway Rest Areas are envisioned to provide an accessible space for rest and parking for travelers, especially those driving a long distance. In addition, modern highway Rest Areas provide many amenities to highway users, including wifi service, picnic tables, litter barrels, running water, public telephones, and sometimes even free coffee. Various studies were conducted in the domain of Rest Area facility design and their operating costs in different states; however, limited studies were conducted on the maintenance costs of these facilities. Therefore, this study's main objective is to compute the annual maintenance cost of Rest Areas in the state of Nevada. This study also analyzes the main cost categories of the maintenance works. The raw cost data of Nevada Rest Area maintenance from 1990 to 2012 were collected from the Nevada Department of Transportation (NDOT). Results show that the maintenance cost fluctuated over the study period; the maintenance cost decreased from 1991 to 2004 and then increased until 2012. The primary cost categories of maintenance work are labor, equipment, and material costs. Among these, labor cost was the largest category with 56 percent of the total maintenance cost, followed by equipment cost and material cost. The findings of this study may help NDOT and other transportation agencies plan their budget for future Rest Area maintenance activities.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.34 no.2
• /
• pp.77-90
• /
• 2009

Total profit level Increases if a company increase the cost for achieving R&D related goals of equipment productivity enhancement, production cost saving, or for achieving equipment scale target, sales volume goal. But how much money should be invested to achieve a certain level of profit? We formulated the model to set the optimal goal levels to minimize the investment cost under the constraint that certain level of total profit should be guaranteed. This model derived from a case of P steel company. We found that this should be considered in relation with the production sales planning (known as optimal product mix problem) to guarantee the profit. We suggested a nonlinear programming model, 3 valiant form of the p+roduct mix problem. We can find the optimal Investment level for the R&D related goals or sales volume goal, equipment scale target for the P steel company using the model.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.17 no.31
• /
• pp.99-114
• /
• 1994

The introduction of new equipments to strengthen the competitiveness of enterprises is one of pretty important factors. Enterprises introducing new equipments strengthen competitiveness through productivity increasing, high quality maintenance, inventory reduction, improved design and production interface, simple scheduling process, low scrap rate, rework reduction, etc. Managers will work out the best equipment-replacing strategy through the appropriate combination of potential cost attributes and qualitative attributes difficult to quantify in accordance with the business purpose. This study is to present a method to select an equipment-replacing alternative through the decision-making model of Analytic Hierarchy Process in consideration of the differences of cost flow of the alternatives, taking into consideration tangible attributes and strategic intangible attributes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.261-262
• /
• 2013

In this paper, we subject to MA area to identifying improve the performance of equipment and prices down. When we replace the equipment, the cost savings available area, servers, storage, the As-is vs To-be of software compared to the cost. Thus, based decision-making is utilized.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.6
• /
• pp.624-635
• /
• 2012

Construction projects, including housing, are carried out over long periods of time. According to changes to the construction period, the cost of input materials and wages also changes. Therefore appropriate management is important in order to minimize cost risks caused by fluctuations in prices. In Korea, housing units are usually sold in lots prior to construction completion. Therefore, careful management of input elements such as materials and equipment that are sensitive to price fluctuations is very important. This study deals with how the price fluctuation of materials, labor, and equipment influences the change of housing cost and seeks a way for cost management through identifying key resources sensitive to price fluctuation. As a result, a change to the housing cost index multiplies depending on cost changes of materials and labor together. Labor costs are a major factor on the housing cost index. In addition, certain types of materials and labor input to housing construction greatly influence price fluctuations. Thus, it is found that managing those main cost factors is the key for effective cost management.

• Journal of Drive and Control
• /
• v.17 no.4
• /
• pp.176-180
• /
• 2020

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2002.11a
• /
• pp.99-102
• /
• 2002

This paper discusses the estimation of construction cost of high fluidity concrete using segregation reducing type superplasicizer with 350kgf/cm2 of design strength and 60$\pm$5cm of slump flow in order to verify the cost down effect of high fluidity concrete compared with that of plain concrete with 350kgf/cm2 of design strength and 18cm of slump and with 210kgf/cm2 of design strength and 15cm of slump. According to research, under same strength levels, although material cost of high fluidity concrete is somewhat higher than that of plain concrete due to segregation reducing type superplasticizer, labor cost and equipment cost of high fluidity concrete is cheaper than that of plain concrete. However, based on the strength differences, high fluidity concrete shows lower material cost, labor cost and equipment cost than that of plain concrete due to decreasing in size of member and re-bar caused by high strength development of concrete.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.4
• /
• pp.397-404
• /
• 2015

Construction equipment cost is critical to estimate the total construction costs, particularly in large and complicated projects. Public construction projects are typically estimated using the Poom-Saem which includes hourly rates for workers and equipments. Despite its importance, the construction equipment cost may not properly reflect the current market value because it is being updated every six years at most. To keep the data for construction equipment cost estimation up to date, it is highly recommended to use the standard market price that is reported each year by the Ministry of Security and Public Administration (MOSPA). However, there is still a wide gap to directly adopt the standard market price for updating the construction equipment prices. Therefore, this paper suggests an effective way to develop an ordinary management systems for updating construction equipment prices in the Poom-saem based on the standard market price.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.6
• /
• pp.273-284
• /
• 2018

3D printing technology in the construction field is currently being developed and commercialized actively in foreign countries, but the development of material and equipment is underway as an initial research stage in Korea. It is necessary to implement commercialization through the introduction of 3D printing technology in the construction field as soon as possible in Korea, but there is no guideline for suitable equipment and materials in Korea at present. Therefore, in order to help prepare for commercialization, it is necessary to provide data such as equipment size and materials suitable for commercialization at the initial stage. This study investigates the types, specifications, and applications of equipment that are being used overseas to provide the equipment type and material cost required in the initial stage of commercialization in Korea. Using the surveyed data, it was possible to calculate the advantages and disadvantages of the equipment type and specification, and the cost of materials used. As a result of the analysis, Gantry type is suitable for the domestic commercialization, and the standard of the output area is $100m^2$ and the extrusion amount of $250m^3/sec$ is proposed, and the material cost of the commercial product is 20thousand won. The suggestions in this study will help to plan the construction of products and equipments to commercialize 3D printing technology in construction field in the future.