• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.06a
• /
• pp.425-431
• /
• 2009

Recently, new technology has been introducing according to the efforts for maritime safety, traffic and environmental protection that uses electronic method to make use of maritime information effectively. To be associated with the tendance, international society which centered to IALA Introduces advanced technology of AtoN with Automatic Identification System(AIS) that it is crucial method to collect and transmit maritime data. This article is to thoroughly analyse and investigate the international and national regulation of related AtoN AIS, and propose to be included and applied into national radio-communication equipment regulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2976-2983
• /
• 2013

Interest in reducing standby power is increasing because of electric power shortages. Most of electric equipment are in standby state that does not use a function of the original, most electronic devices consume a lot of electric power even in standby mode. In many countries, research on the smart plug is advanced in order to prevent power consumption due to standby state. However, due to the nature of the function, expensive in many case. These smart plugs would be to cut the standby power using motion detecting sensor or pattern control of the user. Theses features have no advantages because of malfunction of motion detecting sensor and in accordance with the diversification ot user's pattern. In this study, developing a multi-smart plug system that linked with bluetooth function of user's smart phone. Using smart phone bluetooth function, determination of the position of the user. The suggestion smart plug cutting the standby power of the electronic apparatus. It was confirmed that it is able to reduce the power consumption according to the location of the user.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1608-1613
• /
• 2009

All kinds of equipment which used an embedded system is developed, and these are used as to an actual life in developments regarding an embedded field in a lot of sections. Also, we can collect data from all kinds of sensors through wireless sensor networks, look by real time data collected could be brought if only through embedded system. In this paper we present a plan which improve the capabilities of embedded system only act as a gateway by installing embedded database in an embedded system for the sensing data management that was transmitted by radio from sensor nodes. In other words, by installing an embedded database to store and manage data by sensing data can be reduced the transmission frequency to communicate with a host and by performing the filtering program in embedded system and then by transmitting only valid data to the host can be increase the reliability of the analysis results based on data collected.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2534-2540
• /
• 2010

In this paper we propose contents and results on installation and commissioning test for ATP on-board unit, which has propelled as one of the research projects, so called, "Reliability assessment and operation technology development for Korean-type tilting trains" in order to ensure the safety and operation efficiency of tilting trains. In KRRI, we have developed tilting trains for the speed-up of existing lines and for the passenger service improvement where the KTX is not available. And we also make progress the operation trial test at the speed of 10km with the use of ATS units, used in existing lines, for the purpose of the reliability assessment of the developed tilting trains. In MLTM, they have decided to accelerate the speed at more than 200km/h for the 7 existing lines including Jungang-line and Chungbuk-line where KTX has not operated. According to this decision, Train control system is to be changed from ATS to ATP. We should install an ATP on-board unit in tilting trains and verify the operational suitability. Therefore, we have installed and tested the same ATP on-board unit on tilting trains that used in the ATP construction project on Gyeongbu-line and Honam-line.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.1
• /
• pp.89-97
• /
• 2007

This paper describes a load simulator with power recovery capability, which is based on the voltage source converter-inverter set. The load simulator can save the electric energy that should be consumed to test the operation and performance of the power quality compensator and the power equipment. The load simulator consists of a converter-inverter set with a DSP controller for system control and PWM pulse generation. The converter operates as a universal load to model the linear load and the non-linear load, while the inverter feed the energy back to the power source with harmonic compensation. the performance of proposed load simulator was analyzed with scaled-model experiment, interconnected with the active power filter. The experimental results confirms that the proposed load simulator can be utilized to test the performance of active power filter.

• The KIPS Transactions:PartA
• /
• v.9A no.1
• /
• pp.1-8
• /
• 2002

Most of the traditional embedded web server systems have been designed for monitoring and controlling some dedicated equipments. Hence, not only they have no generality and flexibility but also they are too expensive for the lower-cost domestic equipment. To cope with these difficulty, we suggest a lower-cost ${\mu}$-embedded web server model which is suitable for monitoring and controlling the industry or house equipments by using the internet. The suggested model is based on an one-chip ${\mu}$-processor in which the ISP (In-System Programming) function and flash ROM are embedded basically to minimize the cost of H/W and S/W. Also it allows to add an new function dynamically to provide the generality and flexibility. Finally, to evaluate the feasibility of the suggested model, we have manufactured a test-board based on the ATMega103 ${\mu}$-processor and programmed the control program and tested it on the MS Explorer 5.0 environment.

• Safety and Health at Work
• /
• v.7 no.1
• /
• pp.32-37
• /
• 2016

Background: Previous research has shown that paramedics are exposed to risks in the form of injuries to the musculoskeletal system. In addition, there are studies showing that they are also at increased risk of cardiovascular disease, cancer, and psychiatric diseases, which can partly be explained by their constant exposure to stress. The aim of this study is to evaluate whether the use of shoulder straps decreases physical effort in the form of decreased heart rate and cortisol concentration. Methods: A stretcher with a dummy was carried by 20 participants for 400 m on two occasions, one with and one without the shoulder straps. Heart rate was monitored continuously and cortisol samples were taken at intervals of 0 minutes, 15 minutes, 30 minutes, 45 minutes, and 60 minutes. Each participant was her or his own control. Results: A significant decrease in heart rate and cortisol concentration was seen when shoulder straps were used. The median values for men (with shoulder straps) at 0 minutes was 78 bpm/21.1 nmol/L (heart rate/cortisol concentration), at 15 minutes was 85 bpm/16.9 nmol/L, and at 60 minutes was 76 bpm/15.7 nmol/L; for men without shoulder straps, these values were 78 bpm/21.9 nmol/L, 93 bpm/21.9 nmol/L, and 73 bpm/20.5 nmol/L. For women, the values were 85 bpm/23.3 nmol/L, 92 bpm/20.8 nmol/L, and 70 bpm/18.4 nmol/L and 84 bpm/32.4 nmol/L, 100 bpm/32.5 nmol/L, and 75 bpm/25.2 nmol/L, respectively. Conclusion: The use of shoulder straps decreases measurable physical stress and should therefore be implemented when heavy equipment or a stretcher needs to be carried. An easy way to ensure that staff use these or similar lifting aids is to provide them with personalized, well-adapted shoulder straps. Another better option would be to routinely sewn these straps into the staff's personal alarm jackets so they are always in place and ready to be used.

• Safety and Health at Work
• /
• v.9 no.1
• /
• pp.95-100
• /
• 2018

Background: Respiratory protection equipment (RPE) is the last resort to control exposure to workplace air pollutants. A comprehensive respiratory protection program (RPP) ensures that RPE is selected, used, and cared properly. Therefore, RPP must be well integrated into the occupational health and safety requirements. In this study, we evaluated the implementation of RPP in Iranian petrochemical industries to identify the required solutions to improve the current status of respiratory protection. Methods: This cross-sectional study was conducted among 24 petrochemical industries in Iran. The survey instrument was a checklist extracted from the Occupational Safety and Health Administration respiratory protection standard. An index, Respiratory Protection Program Index (RPPI), was developed and weighted by analytic hierarchy process to determine the compliance rate (CR) of provided respiratory protection measures with the RPP standard. Data analysis was performed using Excel 2010. Results: The most important element of RPP, according to experts, was respiratory hazard evaluation. The average value of RPPI in the petrochemical plants was $49{\pm}15%$. The highest and lowest of CR among RPP elements were RPE selection and medical evaluation, respectively. Conclusion: None of studied petrochemical industries implemented RPP completely. This can lead to employees' overexposure to hazardous workplace air contaminants. Increasing awareness of employees and employers through training is suggested by this study to improve such conditions.

• Nuclear Engineering and Technology
• /
• v.52 no.1
• /
• pp.19-26
• /
• 2020

Small nuclear reactor features higher power capacity, longer operation life than conventional power sources. It could be an ideal alternative of existing power source applied for special equipment for terrestrial or underwater missions. In this paper, a 25kWe heat pipe cooled reactor power source applied for multiple use is preliminary designed. Based on the design, a thermal-hydraulic analysis code for heat pipe cooled reactor is developed to analyze steady and transient performance of the designed nuclear reactor. For reactor design, UN fuel with 65% enrichment and potassium heat pipes are adopted in the reactor core. Tungsten and LiH are adopted as radiation shield on both sides of the reactor core. The reactor is controlled by 6 control drums with B₄C neutron absorbers. Thermoelectric generator (TEG) converts fission heat into electricity. Cooling water removes waste heat out of the reactor. The thermal-hydraulic characteristics of heat pipes are simulated using thermal resistance network method. Thermal parameters of steady and transient conditions, such as the temperature distribution of every key components are obtained. Then the postulated reactor accidents for heat pipe cooled reactor, including power variation, single heat pipe failure and cooling channel blockage, are analyzed and evaluated. Results show that all the designed parameters satisfy the safety requirements. This work could provide reference to the design and application of the heat pipe cooled nuclear power source.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.464-464
• /
• 2010

A few years ago, for maintaining high stability and production yield of production equipment in a semiconductor fab, on-line monitoring of wafers is required, so that semiconductor manufacturers are investigating a software based process controlling scheme known as virtual metrology (VM). As semiconductor technology develops, the cost of fabrication tool/facility has reached its budget limit, and reducing metrology cost can obviously help to keep semiconductor manufacturing cost. By virtue of prediction, VM enables wafer-level control (or even down to site level), reduces within-lot variability, and increases process capability, $C_{pk}$. In this research, we have practiced VM on $SiO_2$ etch rate with optical emission spectroscopy(OES) data acquired in-situ while the process parameters are simultaneously correlated. To build process model of $SiO_2$ via, we first performed a series of etch runs according to the statistically designed experiment, called design of experiments (DOE). OES data are automatically logged with etch rate, and some OES spectra that correlated with $SiO_2$ etch rate is selected. Once the feature of OES data is selected, the preprocessed OES spectra is then used for in-situ sensor based VM modeling. ICP-RIE using 葰.56MHz, manufactured by Plasmart, Ltd. is employed in this experiment, and single fiber-optic attached for in-situ OES data acquisition. Before applying statistical feature selection, empirical feature selection of OES data is initially performed in order not to fall in a statistical misleading, which causes from random noise or large variation of insignificantly correlated responses with process itself. The accuracy of the proposed VM is still need to be developed in order to successfully replace the existing metrology, but it is no doubt that VM can support engineering decision of "go or not go" in the consecutive processing step.