• Journal of Drive and Control
• /
• v.13 no.3
• /
• pp.1-7
• /
• 2016

A cold gas blow-down hydraulic actuation system is widely used in missiles that require an actuation system with a fast response time under a limited space with a short operating time and large loads on the actuators. The system consists of a pneumatic part that supplies the regulated high-pressure gas to a reservoir, and a hydraulic part that supplies pressurized hydraulic oil to the actuators by the pressurized gas in the reservoir. This paper proposes a mathematical model to analyze and simulate the pneumatic part of an actuation system that supplies the operating power to the actuators. The mathematical model is based on the ideal gas equation and also considers the models for heat transfer. The model is applied to the pressure vessel and the gas part of the reservoir, and the model for the pneumatic part is established by connecting the two models for the parts. The model is validated through a comparison of the simulation results with the experimental results. The comparison shows that the suggested model could be useful in the design of the pneumatic part of a cold gas blow-down type hydraulic actuation system.

• Culinary science and hospitality research
• /
• v.13 no.1 s.32
• /
• pp.235-243
• /
• 2007

The results of hotel management have revealed a lot of problems in regard to the suitable placement of kitchen facilities, equipment and utensils, appropriate positioning of kitchen workers, and management of kitchen supplies. To solve these problems, this study examined the relationships among kitchen equipment, layouts, job satisfaction, a sense of self-competence, and production efficiency, proposing the efficient management measures of a reasonable kitchen system. The following are the results. Kitchen facilities had a significant effect on job satisfaction, not on a sense of self-competence. Hotel cooks' awareness of kitchen utensils as well as kitchen layouts had significant influence on both job satisfaction and a sense of self-competence whereas hotel cooks' job satisfaction and their sense of self-competence had great influence on production efficiency.

• Journal of Fashion Business
• /
• v.21 no.1
• /
• pp.148-165
• /
• 2017

An assortment of daily supplies have been documented in and accounting book that Hwa-sun Song, a wholesale dealer in Hongcheon, Gangwon-do, sent to Young-hui Sin, a customer. This study analyzed a total of 163 documentations in the accounting book between 1910 to 1916, which includes types of daly supplies, trading volume, and prices, maintained accounting between. Consequently, we are able to indentify companies that produced the applicable goods, names of products, units by which goods were counted, and the lowest and highest prices prevailing, along with kinds of goods patronized in everyday life in Hongcheon in the early 20th century. Paper had the maximum trading volume. The second, most traded were cigarettes, a symbol of the new culture. These were traded under various brand names, such as Kkotpyo, Guksyu, Sanhopyo, Syonghak, and Joil. Foodstuffs, were the third most traded items, including fish, fruits, sugar, Waeddeok, Chilwaeddeok, Color candies and Okchyun candies. Our results indicate that the snack food business had developed since the 19th century. Lighting equipment, oil, candles, matches as well as traditional oil lamps and flints cornered the fourth largest stock being traded. Medications were fifth, with prescriptions written for Insohwan, Hoechyungsan and Siungo, including quinine, a medicine for malaria. Other trades included kitchen appliances such as soup bowls, porcelain bowls, kettles, and drinking cups, and a variety of daily supplies such as mirrors, mats, umbrellas, Geumjiwaemil, hair oil imported from Japan, and soap.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1415-1419
• /
• 2004

It is essential to evaluate harmonic characteristics of high speed train using power electronics equipment such as converter-driven motor drives, battery chargers and auxiliary power supplies. The purpose of this study is to measure and analyze harmonics characteristics of korea high speed train prototype. This paper presents result of harmonics measurement and analysis of harmonics characteristics in terms of loading, speed and operation mode.

• The Korean Journal of Emergency Medical Services
• /
• v.21 no.1
• /
• pp.87-98
• /
• 2017

Purpose: This study investigated the use of infection management and the frequency of emergency equipment sterilization by emergency rescue crews to provide basic guidelines and suggestions for infection control. Methods: A self-reported questionnaire was completed by 160 emergency medical technician rescue crews in J area from May 7 to May 22 in 2015. The questionnaire consisted of 95 items, including the general characteristics of the subjects (8 items), the use of emergency equipment (33 items), the frequency of facility sterilization (33 items), infection control (12 items), vaccination (4 items), and the use of personal protective equipment (5 items). Results: In all, 97.3% of respondents were aware of the "Guidelines of Infection management for Rescue Operators' and 90.9% received training on infection control. A total of 72.7% and 47.3% of rescue centers were equipped with disinfection facilities and laundry rooms, respectively. The average frequency of sterilization was $3.17{\pm}0.75$, which significantly differed for teams with more clinical experience (p=.050) and teams with three members (p=.030). The average score for individual protective equipment supplies was $1.95{\pm}0.66$. Conclusion: For proper infection management of emergency equipment, our results suggest that the number of crew members should be increased for each ambulance, protective equipment and rescue products should be supplied, and the number of facilities for sterilization and laundry at rescue centers should be doubled.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.36-40
• /
• 2017

The launch operation for a space launch vehicle(SLV) is to be conducted by the systematic operation between SLV and the Technological Equipment(TE) such as the mechanical, fuel, and electrical ground support equipment at launch complex(LC). The basic source for the operation of the instruments in LC is the electrical power supply system, Technological Equipment Power Supply System(TEPSS), which is one of the Launch Control System. Thus TEPSS should supply the required electrical power to TE with reliability. In this paper, TEPSS which supplies operational electrical power to TE is introduced.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04c
• /
• pp.111-114
• /
• 2008

The paper considers the relation between on-line monitoring and diagnostics on the one hand and high-voltage (HV) withstand and partial discharge (PD) on-site testing on the other. HV testing supplies the basic data (fingerprints) for diagnostics. In case of warnings by on-line diagnostic systems, off-line withstand and PD testing delivers the best possible information about defects and enables the classification of the risk. Because alternating voltage (AC) is the most important test voltage, the AC generation on site is considered. Frequency tuned resonant (ACRF) test systems are best adapted to on-site conditions. They can be simply combined with PD measuring equipment. The available ACRF test systems and their application to electric power equipment -from cable systems to power transformers - is described.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04c
• /
• pp.103-105
• /
• 2008

In, this paper, we consider the relation between on-line monitoring and diagnostics on the one hand and high-voltage (HV) withstand and partial discharge (PO) on-site testing on the other. HV testing supplies the basic data (fingerprints) for diagnostics. In case of warnings by on-line diagnostic systems, off-line withstand and PO testing delivers the best possible information about defects and enables the classification of the risk. Because alternating voltage (AC) is the most important test voltage, the AC generation on site is considered. Frequency tuned resonant (ACRF) test systems are best adapted to on-site conditions. They can be simply combined with PO measuring equipment. The available ACRF test systems and their application to electric power equipment -from cable systems to power transformers - is described.

• Proceedings of the KIEE Conference
• /
• 2007.11b
• /
• pp.51-53
• /
• 2007

The nuclear power plant uses the steam which occurs from reactor and T/G the drive. By the T/G in consequence of the fact that the electricity which is produced the power and supplies in transmission system. But, recently the transmission and generation system are placed under deregulation situation from domestic and foreign, the maintenance control is difficult with the accident or the breakdown which relates is increasing. Hereupon, considering for effect to the reactor core against trip element which it does apply a probability concept from the NRC of the United States and it study and the recognition for the importance of the switchyard which is a power equipment which will be revaluated. Hereupon using the American example, the reliability establishment method which is suitable in domestic and it searches it does.

• IE interfaces
• /
• v.17 no.4
• /
• pp.450-458
• /
• 2004

S-Distribution Center supplies parts to three plants of K-automobile manufacturing company. Since the three plants employ the JIT production system, it is important for S-Distribution Center to deliver small quantities of parts frequently and quickly on time. This paper presents a case study on the improvement of order-picking operation in S-Distribution Center. The study is focused on the reductions of move time and waiting time by redesigning the parts storage location, picking-order terminal location, retrieval policy, and equipment operation policy. The proposed operation system for S-Distribution Center is evaluated through a simple computation analysis and computer simulation. Furthermore, the reducible numbers of equipment and order pickers are investigated by performing a sensitivity analysis.