• 산업공학
• /
• 제19권3호
• /
• pp.245-254
• /
• 2006

Equipments in container terminal have a lot of parts, and an equipment breakdown affects the productivity of terminal. In this paper, we develop a maintenance management system for improving reliability, availability and maintainability of equipments in container terminals. The developed system consists of five modules : equipment structure module, equipment operation management module, maintenance control module, spare part control module and data analysis module. The system supports reliability engineers to manage and improve RAM of equipments in container terminals. For example, FMEA, failure state analysis and life distribution parameters estimation are easily or automatically done by the system. This system also provides optimal preventive maintenance intervals by simulation and optimal yearly PM schedules for equipments in container terminal are recommended.

• Nuclear Engineering and Technology
• /
• 제49권5호
• /
• pp.914-919
• /
• 2017

While industry understands the importance of keeping equipment operational and well maintained, the importance of tracking maintenance information in reliability models is often overlooked. Prognostic models can be used to predict the failure times of critical equipment, but more often than not, these models assume that all maintenance actions are the same or do not consider maintenance at all. This study investigates the influence of integrating maintenance information on prognostic model prediction accuracy. By incorporating maintenance information to develop maintenance-dependent prognostic models, prediction accuracy was improved by more than 40% compared with traditional maintenance-independent models. This study acts as a proof of concept, showing the importance of utilizing maintenance information in modern prognostics for industrial equipment.

• 에너지공학
• /
• 제4권3호
• /
• pp.338-343
• /
• 1995

The objective of this study is to predict the reliability of the electronic control module at ROD control system in nuclear power plant. Maintaining of the reliability is important issue in the complext system like nuclear plower plant, military equipment, satelite system, etc., because the failure of reliability brings etravagant economic loss and deteriorates public acceptance. In addition to the prediction of reliability, the fators affect the reliability including operating condition, environment, temperature and quality factors were analyzed and simulated. The result shows that the quality factors are more critical for the higher reliability than other two factors.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 춘계학술발표대회 개요집
• /
• pp.135-137
• /
• 2003

This paper introduces a new automatic welding equipment for offshore pipeline construction. This paper also describes the design technology and functions of the automatic welding equipment, which features the reliability of the equipment.

• 한국시뮬레이션학회논문지
• /
• 제29권1호
• /
• pp.31-38
• /
• 2020

임무신뢰도란 제품개발 시 목표가 되었던 요구조건하에서 임무를 완수할 확률을 나타내며, 전투체계의 경우 상용 장비와 달리 임무신뢰도가 승패를 좌우할 중요한 요소이다. 기존의 국내 전투체계의 임무신뢰도는 임무수행에 연관된 장비의 물리적 연결만을 고려해 산출되었으나, 장비들이 점차 고도화되어지고 복잡해져 물리적 연결만으로 임무연관성 판단이 불가하다. 이에 따라 본 논문에서는 물리적 연결뿐만 아니라 기능적 연결을 고려한 방법으로 시스템 설계모델링 언어인 SysML을 활용하여 정확도가 향상된 임무신뢰도를 산출하였다. 본 연구결과를 바탕으로 향후 개발되는 전투체계 임무신뢰도 검증자료로 활용 되기를 기대한다.

• 대한조선학회논문집
• /
• 제51권3호
• /
• pp.212-219
• /
• 2014

As subsea production has been revived up, the demand of subsea equipment has also been increased. Among the equipment, subsea tree plays a major role in safety. The tubing hanger is one of the most important components in subsea tree. In this study structural reliability analysis on dual bore tubing hanger of subsea tree is performed. The target reliability which is introduced in ISO regulation is used for judging whether tubing hanger is safe or not. The considered loads are working pressure, working temperature and suspended tubing weight. Thermal-stress analysis on tubing hanger is performed and kriging model is created based on the results of FEM analysis. According to von Mises criterion, limit state equation can be estimated. Reliability analysis is performed by using level 2 method and the result is verified by that of Monte Carlo Simulation. For finding most probable failure point, enhanced HL-RF method is adopted. Because the reliability of model doesn't reach target reliability, an improvement measure should be considered. Thus, it is suggested to change the material of tubing hanger main body to AISI 4140.

• 산업경영시스템학회지
• /
• 제15권26호
• /
• pp.95-98
• /
• 1992

In a recent years, there has been little change in basic mechanical and electrical design of material handling equipment. Reliability, safety. strength and controls have been improved. The most important change is sophisticated control and operation brough about by the tremendous improvement in computer capabilities. Even though the material handling equipment has been improved, material handling equipment must be selected properly. In this paper, the paper selection of material handling equipment using expert system will be presented.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.184-190
• /
• 2009

Recently, the concern for the reliability of railway is increasing, also the study about reliability is being processed at a good pace. However, in case of an existing railway operating it is true that the railway system is being operated without a clear RAM standard. There is not a clear RAM standard about product menual of a city railroad, and there are only basic provisions concerning traction motor which can be called a main equipment. In this paper, we calculated the availability and reliability of subway having MKBSF, MKBF, MTBF, MTTR analyzing accumulated maintenance data about a main equipment of a VVVF direct subway being operated in line #4. By watching the reliability grade of a VVVF subway being operated and manufactured within the country and being applied with the development of a city railway reflected by RAM menual when the new subway is manufactured, and with the basic data of RCM, we'd like to grope the methods which can be improved by operation stability of a city railway.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권11호
• /
• pp.476-484
• /
• 2006

The failure prediction and preventive maintenance for the equipment of nuclear power plant area using reliability-centered maintenance have been grown. On the other hand, the maintenance for power distribution system consists of time-based maintenance mainly. In this paper, the new maintenance algorithms for power distribution system are developed considering reliability indices. First of all, Time-varying failure rates are extracted from data accumulated at KEPCO using exponential distribution function and weibull distribution function. Next, based on the extracted failure rate, reliability for real power distribution system is evaluated for applying the effective maintenance algorithm which is the analytic method deciding the maintenance point of time and searching the feeder affecting the specific customer. Also the algorithm deciding the maintenance priority order are presented based on sensitivity analysis and equipment investment plan are analyzed through the presented algorithm at real power distribution system.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권1호
• /
• pp.27-32
• /
• 2015

Functional safety is part of the overall safety relating to the equipment under control (EUC) and the EUC control system that depends on the correct functioning of the electrical/electronic/programmable electronic (E/E/PE) safety-related systems. Since the complexity of the medical equipment is increased, manufactures have to obtain functional safety as well as basic safety. This study proposes a perspective for applying functional safety to medical equipment. The research is carried out with respect to overall safety life-cycle of functional safety and essential performance of the medical equipment. The relationship between functional safety and essential performance is identified centered on the safety function. The essential performance using E/E/PE systems is defined as a safety function of functional safety. This approach is applied to a ultrasound imaging system as a case study.