• Plant Journal
• /
• v.13 no.2
• /
• pp.39-45
• /
• 2017

This paper is a study on FEED validation model that can be used in the bidding stage of small utility equipment in offshore plant industry using system engineering technique. Currently, domestic marine plant equipment industry companies are faced with the financial risk of project execution as they enter marine plant. The major cause was the insufficient ability to verify the FEED output from the contractor (Engineering or Procurement and Construction) of the equipment manufacturer (COMPANY or EPC). Therefore, we propose FEED design verification method that simplifies the system engineering method that sequentially applies requirements analysis, function, performance analysis and physical architecture building process. Also, we verified the suitability of the developed model by comparing the results of applying the developed FEED verification model and the verification method that depends on the existing experience for the small utility equipment (Air Compressor).

• Journal of the military operations research society of Korea
• /
• v.32 no.1
• /
• pp.90-112
• /
• 2006

The main purpose of this study is to develop an economical efficiency and maximize efficient characteristic of national defense supply. It's very important to select a supply unit which is excellent in business because it's maximize its efficiency in procurement. So this study focused on the users' dissatisfactions and the elements which have an effect on procurement, especially when they have a general competition contract. In order to have a good result, we studied the papers from Ministry of National Defense supply headquarters and the National Defense Quality Control Office, and referred to various data which contracted within recent 2 years and collect users' dissatisfactions in 3 years in track and mobile equipment field. And we present a analysis between the dissatisfactions and the elements of procurement method by SPSS 12.0.

• Fire Science and Engineering
• /
• v.21 no.2 s.66
• /
• pp.87-97
• /
• 2007

This study is to investigate the problems of procurement circumstance of the current fire service funds and to suggest the alternatives for procuring the fire service funds for dealing with increasing demand on the fire service in the local autonomous era. The results are as the followings. First, most fire service officers see the procurement circumstances as premature stage and perceive the necessity of the improvement of this condition. In particular, the officers at the fire center recognize this problem as an urgent question than the officers at the front fire branches. In addition, as for the alternatives of the procurement of fire service funds, both groups prefer the long term plan to the short term plan, and show positive responses to the National Emergency Management Agency and central government as the entity to raise fire funds. As for the alternatives to improve financial system, both groups show the most positive responses on the way to increase the current common facilities tax. As for the specific procurement alternatives of fire funds, both groups agree the alternative to increase common facilities tax mostly, and to the next they agree the alternative to insecure fire funds by restructuring current financial system and by establishing fire service hospital and fire equipment maintenance center.

• Plant Journal
• /
• v.8 no.1
• /
• pp.50-59
• /
• 2012

The current dual-watchdog estimation system has individually calculated the construction, the engineering and the procurement cost. The dual-watchdog estimation system is inefficient and prolonged estimation period because of the lack of the interoperability and the difference of material unit cost and construction unit cost. In order to resolve this problem, new estimation software was developed. The estimation software is developed by making up for the weak points in existing estimation method. The cost data with the same standard is the key point. And this software enhanced accuracy and speed of the data search in stylized estimation standard. A summary of the construction, the engineering and the procurement cost was generated in this estimation software. The unit rate about the labor cost, equipment and expense through a sheet was handled. The developed estimation software has five categories on engineering cost, procurement cost, construction cost and subcontractor management sheet. In this study, the estimation software to supplement the faults of the existing estimation method was developed. And estimation software on petrochemical projects increases an efficiency of the estimation work.

• International conference on construction engineering and project management
• /
• 2017.10a
• /
• pp.153-158
• /
• 2017

Procurement system of public construction projects in Japan is changing with diversity in rapid pace. The quality assurance and risk management of construction projects should be more certain as the projects are turning into larger scale and more complexed. The clients in the public sector will want to make the relation of responsibility among the client, the designer (architects and engineers), and contractor clearer in terms of role and risk. Public-Private Partnership (PPP) is one of the methods for collaboration of the public sector and the private sector in public construction projects where the public utilizes the ability and suggestion of the private. Private Finance Initiative (PFI), Design-Build-Operate (DBO), market testing, designated manager system, outsourcing of tasks in local governments are well-known as examples of PPP in Japan. Indeed, there is an obvious trend that Design-Build (DB) is adopted in public construction projects in many countries including Japan. In this paper, the public construction projects in various procurement systems are surveyed and analyzed. They are not limited within the traditional procurement, Design-bid-Build, a separate order system of design and construction. Design-Build or PFI are adopted. In particular, contract by wide range including maintenance of equipment can be found. On the other hand, modification from originally typical PFI is taking place, such as concept design and project finance are removed from the roles and the tasks of the special purpose company (SPC) in PFI. Standard roles and tasks in a construction project are modeled in this paper.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.47
• /
• pp.87-99
• /
• 1998

This study is concerned with a problem of determining the optimal requirements level of the spare parts, especially Concurrent Spare Parts(CSP). CSP is supplied with the procurement of new equipment system, and is used to sustain the equipment without resupply during the initial coverage period. We consider this situation as a multiechelon inventory model with several bases and one depot. And we assume a equipment system which consists of many types of parts would grounded if one of the parts fail. Also this multiechelon CSP problem is considering a time-varing (dynamic) environment. We develop a computational procedure to find the optimal number of spare parts minimizing the total expected cost, while achieving the required system availability. Finally we present a simple example of suggested method.

• Journal of the military operations research society of Korea
• /
• v.24 no.2
• /
• pp.146-161
• /
• 1998

This article develops model of the nonstationary state behavior of the multiechelon spare parts provisioning systems. This study is concerned with a problem of determining the near optimal requirements level of the spare parts, especially Concurrent Spare Parts(CSP). CSP is supplied with the procurement of new equipment system, and is used to sustain the equipment without resupply during the initial coverage period. We consider this situation as a multiechelon inventory model with several bases and one depot. And we assume an equipment system which consists of many types of parts would grounded if one of the parts fail. Also this multiechelon CSP problem is considering the nonstationary poisson failure process and nonstationary exponential repair process in a dynamic environment. We develop an efficient computational procedure to find the near optimal number of spare parts minimizing the total expected cost, while achieving the required system availability. Finally we present a simple example of suggested method.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.4
• /
• pp.121-127
• /
• 2007

CSP(Concurrent Spare Parts) is supplied with the procurement of new equipment or weapon system and is used to sustain the equipment without resupply during the initial coverage period. This study is concerned with a problem of determining the near optimal inventory level of the spare parts, especially Concurrent Spare Parts. For this, we utilize the mixed periodic and continuous review polices considering the CSP and (r,Q) Policies concurrently in a two-echelon distribution system. We propose the mathematical model to minimize the total cost which is composed with ordering cost, purchasing cost, holding cost, and stickout cost. If the mixed policy is compared to other policies(CSP, (r,Q)), the proposed methodology performs well and is best policy in the equipment maintenance expenses.

• Journal of the Korea Convergence Society
• /
• v.9 no.7
• /
• pp.231-240
• /
• 2018

Automobile industry is facing a variety of risks, including the rise of international oil price and the increase of car prices. In addition to the government's deregulation, efforts should be made to improve management aiming at higher production efficiency. In this study, we established a model for evaluating the procurement logistics based on the Fuzzy-AHP-TOPSIS by using the factors that are actually used in real companies aimed at the improvement of procurement logistics. A total of three automobile factories of Company G were chosen as the evaluation subject. In the result of the Fuzzy-AHP analysis that was conducted on a sample of three car factories, solving the long-term quality problems, minimizing the stop time due to the shortage of materials, preventing the of equipment accident, and solving the short-term quality problems were proven to be the most important factors. TOPSIS analysis result indicated that Factory B had the best procurement logistics. Our study has significance that it can contribute to the improvement of efficiency in the automobile industry as the evaluation model suggested in this study can be used for regular evaluation related to the procurement logistics in the future.

• Journal of Korean society of Dental Hygiene
• /
• v.9 no.4
• /
• pp.606-619
• /
• 2009

Objectives : This study was to examine the state of customized visiting oral health programs in a bid to help facilitate the unified operation of the programs and the development of required guidelines. Methods : The subjects in this study were 49 dental hygienists who were professionals responsible for customized visiting health care programs across the nation. Results : 1. Regarding the form of employment of the dental hygienists were investigated many contract and daily workers. 2. As to the possession of equipment necessary for visiting oral health programs, denture cleaners(12.2%) were most widely possessed in some regions, followed by mobile scalers(10.2%) and mobile suctions(8.2%). In terms of expendable devices and materials, dental mirrors, pincettes and explorers were the most widely possessed dental checkup devices, and the most widely possessed oral hygiene supplies were toothbrushes, interdental brushes and denture cleaners. Those devices and materials were in more possession than the other types of devices and materials. The most widely possessed equipment for educational purpose was laptop computers, followed by beam projectors and screens. The most widely possessed teaching materials were dentiform, followed by CD-ROMs. 3. Those whom they visited the most for oral health care service were elderly people, followed by the disabled and patients with chronic diseases. The dental hygienists who went out to visit those people outnumbered the others who stayed at public health centers. Concerning the types of visiting oral health care service, the most prevalent service provided to the elderly included denture cleaning/management, oral massage and preventive treatment against dental caries. The most dominant service provided to the disabled involved education of the oral health care act, preventive treatment against dental caries and toothbrushing by professionals. The most common service offered to patients with chronic diseases was education of the oral health care act and oral health education. The dental hygienists paid a visit to a mean of 5.8 households a day. The average weekly number of households cared by the dental hygienists was 27.3. It took a mean of 37.1 minutes for them to take care of each household. 4. As for satisfaction level with the implementation of the visiting oral health programs, they expressed the greatest satisfaction at teamwork with professionals($3.56{\pm}0.94$), followed by the professionalism of their work($3.21{\pm}0.94$) and workload($3.08{\pm}0.94$). Their satisfaction level with the work conditions required for creative job performance($2.75{\pm}0.98$) and partnership with other institutions($2.64{\pm}1.03$) was below 3.0. In regard to the impact of their characteristics, marital status made a statistically significant difference to satisfaction level with workload. The unmarried dental hygienists were more pleased with their workload than the married ones(p<0.05). 5. As to needs for education for professionalism improvement, they asked for education about visiting oral health care skills the most, followed by education about oral health care for patients with chronic diseases, education of planning/evaluation and education of oral health care for the disabled. Conclusions : The top priority for the vitalization of the programs was the procurement of budget, followed by the procurement of equipment and educational media and the procurement of human resources.